 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
1812A-D8-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 TME | 181207F3302T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 33kΩ; SMD; 1812; 750mW; ±1%; 200V; -55÷155°C |
| 4,000 | |
| 1318126-2 | TE Connectivity | Connector: wire-board; male; data; Inom: 5A; 250V; PIN: 12; shrouded RoHS : Compliant |
| 936 | ||
| 09451812800XL | HARTING Technology Group | Connector: Single Pair Ethernet; plug; T1 Industrial; male; PIN: 2 RoHS : Compliant |
| 52 | ||
| 1812 | Lutronic Holdings | Connector: M12; contact insert; PIN: 4; male; industrial; 250V; IP67 |
| 0 | ||
| 03181.25HXP | Littelfuse Inc | Fuse: fuse; 6.99x32.7mm; glass; THT; 1.25A; 250VAC; quick blow; 318 RoHS : Compliant |
| 0 | ||
| 09181249422 | HARTING Technology Group | Connector: IDC; SEK Low Profile; PIN: 24; straight; THT; tinned; PBT RoHS : Compliant |
| 0 | ||
| 128.018-12 | Pneumatic Components Limited (PCL) | Push-in fitting; angled; -0.95÷15bar; nickel plated brass,PBT |
| 0 | ||
| 151.018-12 | Pneumatic Components Limited (PCL) | Push-in fitting; bulkhead,straight; -0.95÷15bar; Thread: Rc 1/8" |
| 0 | ||
| 181207F2001T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 2kΩ; SMD; 1812; 750mW; ±1%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
| 181207F200JT4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 20Ω; SMD; 1812; 750mW; ±1%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
| 181207F6802T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 68kΩ; SMD; 1812; 750mW; ±1%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
| 181207F680KT4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 6.8Ω; SMD; 1812; 750mW; ±1%; 200V; -55÷125°C |
| 0 | ||
| 181207J0121T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 120Ω; SMD; 1812; 750mW; ±5%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
| 181207J012JT4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 1.2Ω; SMD; 1812; 750mW; ±5%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
| 181207J0162T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 1.6kΩ; SMD; 1812; 750mW; ±5%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
 Avnet Americas | 18127C473KAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43BR72H473KV) RoHS : Compliant |
| 8,000 | |
| 18125C475MAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43JR71H475MV) RoHS : Compliant |
| 3,500 | ||
| 18125C105MAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43FR71H105MV) RoHS : Compliant |
| 3,000 | ||
| ISC1812ER1R5K | Vishay Intertechnologies | ISC-1812 1.5 10% ER E3 - Tape and Reel (Alt: ISC1812ER1R5K) RoHS : Compliant |
| 2,000 | ||
| 18125C224MAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43AR71H224MV) RoHS : Compliant |
| 2,000 | ||
C1812C474J5RACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.47 uF, 50 V, 1812 [4532 Metric], ? 5%, X7R, C Series - Tape and Reel (Alt: C1812C474J5RACTU) RoHS : Compliant |
| 2,000 | ||
| 18125C824KAT2A | Kyocera AVX Components | - Tape and Reel (Alt: 18125C824KAT2A) RoHS : Compliant |
| 2,000 | ||
| C1812C183KDRACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.018 uF, 1 kV, 1812 [4532 Metric], ? 10%, X7R, C Series - Tape and Reel (Alt: C1812C183KDRACTU) RoHS : Compliant |
| 1,000 | ||
| 18123A153FAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43BCG1E153FV) RoHS : Compliant |
| 1,000 | ||
| 18121C103KAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43AR72A103KV) RoHS : Compliant |
| 1,000 | ||
| VJ1812Y103KXEAT | Vishay Intertechnologies | SMD Multilayer Ceramic Capacitor, 10000 pF, 500 V, 1812 [4532 Metric], ? 10%, X7R - Tape and Reel (Alt: VJ1812Y103KXEAT) RoHS : Compliant |
| 1,000 | ||
| 18121A472JAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43BCG2A472JV) RoHS : Compliant |
| 1,000 | ||
| 18123C105KAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43FR71E105KV) RoHS : Compliant |
| 1,000 | ||
| ISC1812ER330K | Vishay Intertechnologies | ISC-1812 33 10% ER E3 - Tape and Reel (Alt: ISC1812ER330K) RoHS : Compliant |
| 1,000 | ||
| 1812YC106MAT2A | Kyocera AVX Components | - Tape and Reel (Alt: KGM43JR71C106MV) RoHS : Compliant |
| 500 | ||
 Newark | C1812X474K2RACTU | KEMET Corporation | Cap, 0.47Uf, 200V, Mlcc, 1812; |Kemet C1812X474K2RACTU RoHS : Compliant |
| 5,000 | |
| C1812X474K2RACTU | KEMET Corporation | Cap Mlcc Smd, 0.47Uf, 200V, X7R; |Kemet C1812X474K2RACTU RoHS : Compliant |
| 4,725 | ||
| C1812X474K2RACTU | KEMET Corporation | Cap Mlcc Smd, 0.47Uf, 200V, X7R; |Kemet C1812X474K2RACTU RoHS : Compliant |
| 4,725 | ||
| C1812C124J1GACTU | KEMET Corporation | Cap, 0.12µf, 100V, 5%, C0G/Np0, 1812; |Kemet C1812C124J1GACTU RoHS : Compliant |
| 967 | ||
| C1812C124J1GACTU | KEMET Corporation | Cap, 0.12µf, 100V, 5%, C0G/Np0, 1812; |Kemet C1812C124J1GACTU RoHS : Compliant |
| 967 | ||
| PIC16F18126-I/7N | Microchip Technology Inc | Mcu, Pic16, 8Bit, 32Mhz, Vqfn-16; |Microchip Technology PIC16F18126-I/7N RoHS : Compliant |
| 860 | ||
| C1812C105J5RACTU | KEMET Corporation | Cap, 1?f, 50V, 5%, X7R, 1812; |Kemet C1812C105J5RACTU RoHS : Compliant |
| 680 | ||
| C1812C105J5RACTU | KEMET Corporation | Cap, 1?f, 50V, 5%, X7R, 1812; |Kemet C1812C105J5RACTU RoHS : Compliant |
| 680 | ||
| C1812C185J1RACAUTO | KEMET Corporation | Capacitor, 1.8Uf, X7R, 100V, 1812; |Kemet C1812C185J1RACAUTO RoHS : Compliant |
| 420 | ||
| C1812C185J1RACAUTO | KEMET Corporation | Capacitor, 1.8Uf, X7R, 100V, 1812; |Kemet C1812C185J1RACAUTO RoHS : Compliant |
| 420 | ||
| TW-18-12-G-D-400-085 | Samtec Inc | Conn Stack Brd, 2Mm, 36Pos, Hdr; |Samtec, Inc. TW-18-12-G-D-400-085 RoHS : Compliant |
| 96 | ||
| TW-18-12-L-D-765-082 | Samtec Inc | Conn Stack Brd, 2Mm, 36Pos, Hdr; |Samtec, Inc. TW-18-12-L-D-765-082 RoHS : Compliant |
| 84 | ||
| MKP1848E61812JY5 | Vishay Intertechnologies | Capacitor, Film, Pp, 18Uf, 1.2Kv, Radial; |Vishay MKP1848E61812JY5 RoHS : Compliant |
| 45 | ||
| ESW-118-12-G-D-LL | Samtec Inc | ".100" Elevated Socket Strip"; |Samtec, Inc. ESW-118-12-G-D-LL RoHS : Not Compliant |
| 38 | ||
| TRA-13218-12 | Omega Engineering | Thermocouple Insulator, 12", 1/32", 1/8"; |Omega TRA-13218-12 RoHS : Compliant |
| 2 | ||
 Analog Devices Inc | DS1812R-10+T&R | Analog Devices Inc | 5V EconoReset with Active High RoHS : Compliant |
| 67,251 | |
| LT1812IS8#PBF | Analog Devices Inc | 3mA, 100MHz, 750V/microns Op A RoHS : Compliant |
| 35,440 | ||
| DS1812R-15+T&R | Analog Devices Inc | 5V EconoReset with Active High RoHS : Compliant |
| 21,000 | ||
| LT1812IS8#TRPBF | Analog Devices Inc | 3mA, 100MHz, 750V/microns Op A RoHS : Compliant |
| 20,000 | ||
| LT1812IS5#TRMPBF | Analog Devices Inc | 3mA, 100MHz, 750V/microns Op A RoHS : Compliant |
| 11,643 | ||
| MXD1812UR46+T | Analog Devices Inc | Low-Power µP Reset Circuits in RoHS : Compliant |
| 10,000 | ||
| LT1812CS8#PBF | Analog Devices Inc | 3mA, 100MHz, 750V/microns Op A RoHS : Compliant |
| 9,051 | ||
ADP2140ACPZ1812R7 | Analog Devices Inc | .6A Buck 1.8Vo + 0.3A LDO 1.2V RoHS : Compliant |
| 9,000 | ||
| LT1812CS6#TRMPBF | Analog Devices Inc | 3mA, 100MHz, 750V/microns Op A RoHS : Compliant |
| 8,000 | ||
| LT1812IS6#TRPBF | Analog Devices Inc | 3mA, 100MHz, 750V/microns Op A RoHS : Compliant |
| 5,000 | ||
| LT1812CS5#TRMPBF | Analog Devices Inc | 3mA, 100MHz, 750V/microns Op A RoHS : Compliant |
| 3,721 | ||
| LT1812IS5#TRPBF | Analog Devices Inc | 3mA, 100MHz, 750V/microns Op A RoHS : Compliant |
| 2,500 | ||
| DS1812R-10-U+ | Analog Devices Inc | 5V EconoReset with Active High RoHS : Compliant | 0 | |||
ADM1812-10ARTZ-RL7 | Analog Devices Inc | RESET GENERATOR I.C. RoHS : Compliant |
| 0 | ||
| MAX1812EUB+T | Analog Devices Inc | Dual USB Switch with Fault Bla RoHS : Compliant |
| 0 | ||
 RS | 39100-1812 (M800-01-12-5-M1) | Molex | TERM STRIP 8MM HIGH PROF 12 CIR, 39100 SERIES |
| 142 | |
| AMTE-M-LH-G18 (1205860) | Festo | SILENCER, G 1/8 THREAD, 76 DBA, BRASS BODY, BRONZE SILENCER INSERT |
| 107 | ||
| 2218120 (2218120 CX100) | Lapp Group | MULTICONDUCTOR CABLE, TRAY, 18 AWG, 12C, 0.508 IN. OD, UL/CSA (TC, AWM), 600V-TC |
| 25 | ||
| 221812 (221812 CX 100) | Lapp Group | TRAY CABLE, OLFLEX TRAY II, 18 AWG/12C, 600V, UL TC-ER, UL MTW, C(UL) CIC/TC FT4 |
| 10 | ||
| E2K-C25MY1-8 1.2M (E2KC25MY1812M) | OMRON Industrial Automation | CAPACITIVE PROXIMITY SENSOR CYLINDRICAL25 MM NO 100-220 VAC |
| 8 | ||
| 05118120001 (118120) | Wera Werk Hermann Werner GmbH & Co. KG | 2069 4.0 X 60MM SOCKET SCREWDRIVER, KRAFTFORM MICRO |
| 6 | ||
| 05118124001 (118124) | Wera Werk Hermann Werner GmbH & Co. KG | 2069 5.0 X 60MM SOCKET SCREWDRIVER, KRAFTFORM MICRO |
| 6 | ||
| 601812CY (601812CY CX 100) | Lapp Group | FLEXIBLE CABLE, OLFLEX 190 CY, MULTICOND, OIL RESISTANT, 18/12C, UL MTW, 600VV |
| 6 | ||
| 2451812 (25531484) (MPOI-1001750-100RS) | RS Pro | SCREW, #10-24 X 1 3/4 PHILLIPS OVAL MACHINE, ZINC PLATED |
| 5 | ||
| 881812 SL005 | Alpha Wire | MULTICONDUCTOR CABLE, 12C, 18 AWG, 16X30, TC, PVC INS, CHROME PVC JKT, AWM |
| 3 | ||
| 13.01.8.125.0000 | FINDER SpA | ELECTRONIC STEP RELAYS, SPST- NO 16A, 125V AC COIL, AGSNO2, DIN-RAIL MOUNT RoHS : Compliant |
| 3 | ||
| 1812014 | RS Pro | EXPANDABLE BRAIDED CABLE SLEEVE, 0.295 INCH (7.5MM)DIAMETER, 328FT (100M)LENGTH |
| 1 | ||
| 22-18125-K16 | MELTRIC Corporation | DXN20 INLET POLY BLACK SIZE 1 IP 66/67 1P+N+G 20A 127 VAC 60 HZ |
| 1 | ||
| 1812 | RACO | RIGID/IMC COMPRESSION CONNECTOR 3" STEEL |
| 0 | ||
| 1812 | Heyco | RDD LOCKIT STRAIN RELIEF/BUSHING, RIGHT ANGLE, 200-2-90, BLACK |
| 0 | ||
 STMicroelectronics | HSP181-2W3Y | STMicroelectronics | Automotive grade 18V dual-line high speed port protection RoHS : Compliant |
| 1,864 | |
| STM1812MWX7F | STMicroelectronics | Low power reset circuit RoHS : Compliant |
| 86 | ||
| STM1812LWX7F | STMicroelectronics | Low power reset circuit RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | MD1812K6-G | Microchip Technology Inc | HIGH SPEED QUAD MOSFET DRIVER, VQFN, Projected EOL: 2036-04-13 RoHS : Compliant |
| 6,368 | |
| PIC16F18124-I/ST | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, TSSOP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 4,608 | ||
| PIC16F18124-I/SL | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, SOIC, Projected EOL: 2051-05-27 RoHS : Compliant |
| 3,762 | ||
| PIC16F18126-E/7N | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256b EEPROM, 12b ADCC w/ Context Saving, 2x AC, 2x 8b DAC,, VQFN, Projected EOL: 2051-07-24 RoHS : Compliant |
| 2,979 | ||
| PIC16F18124T-I/SL | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, SOIC, Projected EOL: 2051-07-24 RoHS : Compliant |
| 2,600 | ||
| PIC16F18126-I/7N | Microchip Technology Inc | 28KB Flash, 2KB RAM, 256b EEPROM, 12b ADCC w/ Context Saving, 2x AC, 2x 8b DAC,, VQFN, Projected EOL: 2051-03-31 RoHS : Compliant |
| 2,548 | ||
| PIC16F18125-E/P | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, PDIP, Projected EOL: 2051-03-06 RoHS : Compliant |
| 1,770 | ||
| PIC16F18124-I/P | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, PDIP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 1,470 | ||
| PIC16F18124-I/7N | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, VQFN, Projected EOL: 2051-05-27 RoHS : Compliant |
| 1,001 | ||
| PIC16F18124-E/STVAO | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, TSSOP, Projected EOL: 2051-07-11 RoHS : Compliant |
| 864 | ||
| PIC16F18125-E/7NVAO | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, VQFN, Projected EOL: 2051-07-09 RoHS : Compliant |
| 810 | ||
| PIC16F18124-E/ST | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, TSSOP, Projected EOL: 2051-03-06 RoHS : Compliant |
| 576 | ||
| PIC16F18124-E/P | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, PDIP, Projected EOL: 2051-03-06 RoHS : Compliant |
| 570 | ||
| PIC16F18125-E/7N | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, VQFN, Projected EOL: 2051-03-06 RoHS : Compliant |
| 173 | ||
| PIC16F18124-E/SL | Microchip Technology Inc | 7KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 2x16-bit dual PWM, 2x8-bit DAC, SOIC, Projected EOL: 2051-03-06 RoHS : Compliant |
| 171 | ||
 Bisco Industries | HL218-12-21 | West Coast Aerospace | 500 | |||
| E0180-018-1250-S | ARaymond Network | 500 | ||||
| IPBST11812 | Misc Wire Cable Tubing Sleeve | 144 | ||||
| MS25181-2 | TE Connectivity | 90 | ||||
| 18123B-S-0632 | RAF Electronic Hardware | 46 | ||||
| 11812N2250 | Helical Wire Inc | 43 | ||||
| 18123B-S-0632-0 | Amatom Electronic Hardware | 42 | ||||
| C0240-018-1250-S | ARaymond Network | 35 | ||||
| SB01A1B1812X1 | SOURIAU-SUNBANK | 17 | ||||
| 18121B-B-0632-0 | Amatom Electronic Hardware | 15 | ||||
| 18122C-B-0632-28 | Amatom Electronic Hardware | 9 | ||||
| 31-018-12 | MISC. LABELS | 4 | ||||
| 114121-812-SS-R-BL | Accurate Screw Machine | 3 | ||||
| 18127C-B-0632-14 | Amatom Electronic Hardware | 2 | ||||
| 91812A430 | WASHERS | 1 | ||||
 Rochester Electronics | MD7IC1812NR1 | NXP Semiconductors | RF MOSFET LDMOS 65V 2.17GHz 12mA, 80mA 14L-FLG T/R RoHS : Compliant |
| 2,000 | |
| ADM1812-5ARTZ-REEL | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.62V, PDSO3 RoHS : Compliant |
| 9,500 | ||
| ADP2140ACPZ1812R7 | Analog Devices Inc | IC VOLT REG Selectable, Selectable Step-Down (Buck) Synchronous (1), Linear (LDO) (1) 2 OUT 1.65V - 5.5V 10-SON T/R RoHS : Compliant |
| 19,691 | ||
| ADM1812-10ARTZ-RL7 | Analog Devices Inc | Supervisory Circuit 4.35V SOT-23-3 T/R RoHS : Compliant |
| 17,069 | ||
| ADM1812-5ART-REEL7 | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.62V, PDSO3 RoHS : Not Compliant |
| 17,050 | ||
TPS71918-12DRVR | Texas Instruments | IC VOLT REG Fixed 2 REG 1.8V, 1.2V 200mA 6-SON T/R RoHS : Compliant |
| 134,628 | ||
DS1812-5 | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.62V, CMOS, PBCY3 RoHS : Not Compliant |
| 1 | ||
| DS1812R-15/T&R | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +4.13V, CMOS, PDSO3 RoHS : Not Compliant |
| 4,871 | ||
| MXD1812UR41+ | Maxim Integrated Products | MXD1812 Low-Power Microprocessor Reset Circuit RoHS : Compliant |
| 554 | ||
| MXD1812UR44+T | Maxim Integrated Products | Supervisory Circuit 4.37V SOT-23-3 T/R RoHS : Compliant |
| 7,500 | ||
| MXD1812XR41 | Maxim Integrated Products | Supervisory Circuit 4.12V SOT-323 T/R RoHS : Not Compliant |
| 1,293 | ||
MXD1812XR41+T | Maxim Integrated Products | Supervisory Circuit 4.12V SOT-323 T/R RoHS : Compliant |
| 7,500 | ||
| MXD1812XR44+T | Maxim Integrated Products | Supervisory Circuit 4.37V SOT-323 T/R RoHS : Compliant |
| 7,500 | ||
| MXD1812XR46+ | Maxim Integrated Products | MXD1812 Low-Power Microprocessor Reset Circuit RoHS : Compliant |
| 2,358 | ||
| MCP1812AT-033/LT | Microchip Technology Inc | IC VOLT REG Fixed 1 REG 3.3V 300mA SOT-353 T/R RoHS : Compliant |
| 74,000 | ||
 Sager | ESW-118-12-G-D-LL | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 38 | |
| ESQ-118-12-S-D-LL | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| EM221812H | Eaton Bussmann | Pluggable Terminal Blocks EURO ME050-50812 |
| 0 | ||
| FW-04-04-L-D-518-120 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| EW-18-12-S-T-635 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| BA1-B0-26-618-12A-D | Carling Technologies | Circuit Breakers BA1B02661812AD RoHS : Unknown |
| 0 | ||
| 1511181236 | Molex | Headers & Wire Housings MGrid ShrdHdr SMT/oPeg&cap .38AuLF 36Ckt RoHS : Compliant | 0 | |||
| 1218125-2 | TE Connectivity | D-Sub MIL Spec Connectors 15 POS ASSY PLUG LOW PROF 109 RoHS : Not Compliant |
| 0 | ||
| P5-D118129 | OTTO Engineering Inc | ALTERNATE ACTION DOME PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| 0150181227 | Molex | FFC / FPC Jumper Cables Premo-FD19 0.50 Jmpr Lgt 305 TypeA 49Ckt RoHS : Compliant |
| 0 | ||
| 7704918120 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707518129 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707718127 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707918125 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 60A1-18-12-1-B | TE Connectivity | Circular MIL Spec Backshells 60A1-18-12-1-B | 0 | |||
 Coilcraft Direct | 1812DPS-472MLC | Coilcraft Inc | Power inductor, coupled, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 11,020 | |
| 1812LS-154XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,852 | ||
| 1812CS-222XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 2,110 | ||
| 1812CS-122XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 1,981 | ||
| 1812PS-223KRC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS RoHS : Compliant |
| 1,162 | ||
| 1812CS-333XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 600 | ||
| 1812LS-105XJRC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 531 | ||
| 1812CS-472XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 367 | ||
| 1812CS-122XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 303 | ||
| 1812PS-824JLC | Coilcraft Inc | Power inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 274 | ||
| 1812CS-333XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812DPS-102MLC | Coilcraft Inc | Power inductor, coupled, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812FS-242JLC | Coilcraft Inc | Inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812CS-472XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1812FS-332JRC | Coilcraft Inc | Inductor, shielded, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | CC1812KKX7R9BB105 | YAGEO Corporation | RoHS : Compliant | 8,000 | ||
| CC1812KKX7REBB102 | NXP Semiconductors | 1,204 | ||||
| CC1812KKX7RCBB103 | NXP Semiconductors | 203 | ||||
| CC1812KKX7R9BB474 | NXP Semiconductors | 17 | ||||
 ComSIT USA | VJ1812Y103KXGAT | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 1,233 | ||
| C1812C103J5GACTU | KEMET Corporation | AVAILABLE EU RoHS : Compliant | 4,409 | |||
| C1812C152KGRAC7800 | KEMET Corporation | AVAILABLE EU RoHS : Compliant | 2,393 | |||
| 18127 | BREDEN INCORPORATED | AVAILABLE EU | 580 | |||
| 1812L15024 | AVAILABLE EU | 1,383 | ||||
| VJ1812Y103JXEAT | AVAILABLE EU | 1,126 | ||||
| HV1812Y102KXVATHV | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 21,918 | |||
| 1812L01060DR | AVAILABLE EU | 954 | ||||
ComSIT USA | 1812B104M501LT | Walsin Technology Corporation | MULTILAYER CERAMIC CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 500V, 20% +Tol, 20% -Tol, X7R, 15% TC, 0.1uF, Surface Mount, 1812 RoHS : Not Compliant | 28,000 | ||
| 1812J1000224KXT | Knowles Precision Devices | Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.22uF, Surface Mount, 1812 RoHS : Compliant | 20,000 | |||
| 1812L07533DR | Littelfuse Inc | PTC RESETTABLE FUSE PTC Resettable Fuse, 33V, 0.11ohm, Surface Mount RoHS : Compliant | 4,056 | |||
| VJ1812Y103KXEAT | Vishay Intertechnologies | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 500V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.01uF, Surface Mount, 1812 RoHS : Compliant | 3,000 | |||
| 0218125MXP | Littelfuse Inc | Electric Fuse, Time Lag Blow, 1.25A, 250VAC, 35A (IR), Inline/holder, 5x20mm RoHS : Compliant | 3,000 | |||
| CC1812KKX7R0BB474 | YAGEO Corporation | Ceramic Capacitor, Ceramic, 100V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.47uF, Surface Mount, 1812 RoHS : Compliant | 3,000 | |||
| 1812HA221JAT1A | Kyocera AVX Components | HIGH VOLTAGE CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 3000V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00022uF, Surface Mount, 1812 RoHS : Compliant | 2,940 | |||
| C1812C102KDGACAUTO | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, C0G, 30ppm/Cel TC, 0.001uF, Surface Mount, 1812 RoHS : Compliant | 2,000 | |||
| PTS181213V075 | Eaton Bussmann | DC SURFACE MOUNT PTC RESISTOR PTC Thermistor, Surface Mount RoHS : Compliant | 2,000 | |||
| 1812HC272KAZ1A | Kyocera AVX Components | HIGH VOLTAGE MLC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 3000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0027uF, Surface Mount, 1812 RoHS : Compliant | 2,000 | |||
| 1812N120J202CT | Walsin Technology Corporation | Ceramic Capacitor, Multilayer, Ceramic, 2000V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.000012uF, Surface Mount, 1812 RoHS : Compliant | 2,000 | |||
| AD1812AR | Analog Devices Inc | Electronic Component RoHS : Not Compliant | 1,538 | |||
| 1812Y2K00103KST | knowels | MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 2000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.01uF, Surface Mount, 1812 RoHS : Compliant | 1,500 | |||
| DS181215 | Maxim Integrated Products | 5V ECONORESET WITH ACTIVE HIGH PUSH-PULL OUTPUT Power Supply Support Circuit, Fixed, 1 Channel, +4.13VV, CMOS, PBCY3 RoHS : Not Compliant | 1,300 | |||
| 1812PC222KAT1A | Kyocera AVX Components | Ceramic Capacitor, Multilayer, Ceramic, 250V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0022uF, Surface Mount, 1812 RoHS : Compliant | 1,000 | |||
 Interstate Connecting Components | 1218125-2 | TE Connectivity | 15 POSASSYPLUGLOW PROF109 RoHS : Not Compliant |
| 36 | |
| FRCIR06F1812SF80T12 | ITT Interconnect Solutions | FRCIR06F-18-12S-F80-T12 | 0 | |||
| FRITS3100A18-12SB1N0 | Glenair Inc | 0 | ||||
| FRITS4100A18-12SB0N0 | Glenair Inc | 0 | ||||
| FRITS41030R18-12PB1N0F | Glenair Inc | 0 | ||||
| CA08COM-PG18-12S-F0 | ITT Interconnect Solutions | CA08COM-PG18-12S-F0 | 0 | |||
| CIR00RS18-12P-F80T54-NPT1 | ITT Interconnect Solutions | MFR PN: 000860870 |
| 0 | ||
| CIR02RFS1812PF80T12 | ITT Interconnect Solutions | CIR02RFS-18-12P-F80-T12 | 0 | |||
| CIR030AFP-18-12P | ITT Interconnect Solutions | 5015 BAY PNL MT RECP 6#16 PIN |
| 0 | ||
| CIR06R-18-12P-F80-15 | ITT Interconnect Solutions | 5015 BAY STRGHT PLUG 6#16 PIN CRIMP |
| 0 | ||
| 370DS002NF1812A5 | Glenair Inc | ENVIROMENTAL BACKSHELL STRAIGHT DIRECT COUPLING RoHS : Not Compliant |
| 0 | ||
| 10131318-12422GRLF | Amphenol FCi | 10131318-12422GRLF-MTK 4.2 12P | 0 | |||
| 10131319-181210RLF | Amphenol FCi | 10131319-181210RLF-MTK 4.2 18P | 0 | |||
| RPS-18-12/2.0-4-CS-001 | TE Connectivity | RPS-18-12/2.0-4-CS-0016 | 0 | |||
| RPS-1K-18-12-4-CS-0016 | TE Connectivity | RPS-1K-18-12-4-CS-0016 | 0 | |||
 NexGen Digital | 1812AC103KAT2A | Kyocera AVX Components | RoHS : Compliant | 28,000 | ||
| 1812S274M101N | Knowles Precision Devices | 11,500 | ||||
| 1812AC472KAT1A | Kyocera AVX Components | RoHS : Compliant | 3,432 | |||
| RMC1/8 12 5% | SEI Stackpole Electronics Inc | 3,398 | ||||
| 18125C824KAT1 | Kyocera AVX Components | 879 | ||||
| 1812-103J | API Delevan | RoHS : Not Compliant | 500 | |||
| ISC-1812-1000UH | Vishay Huntington | 500 | ||||
| 1812-123J | API Delevan | RoHS : Not Compliant | 325 | |||
| 1812FS-153JLB | Coilcraft Inc | RoHS : Compliant | 239 | |||
| 1812GC102KAT1A | Kyocera AVX Components | RoHS : Compliant | 165 | |||
| 1812SM8-33NJ | Kyocera AVX Components | 125 | ||||
| 1812DPS-223MLC | Coilcraft Inc | RoHS : Compliant | 78 | |||
| IMC-1812 820UH 10% | Vishay Huntington | 22 | ||||
| ISC-1812ES102K | Vishay Huntington | 12 | ||||
CC1812JKNPOCBN331 | YAGEO Corporation | RoHS : Compliant | 9 | |||
 PEI Genesis | CA06F18-12SF80 | ITT Interconnect Solutions |
| 62 | ||
| CA3101F18-12SF127A206 | ITT Interconnect Solutions |
| 62 | |||
| FRCIR06R18-12SF80T108M201.5F | ITT Interconnect Solutions |
| 0 | |||
| FRCIRG06A18-12SF80V0-PG016G | ITT Interconnect Solutions |
| 0 | |||
| FRMGCIR02R18-12SF80T54-15-SV | ITT Interconnect Solutions |
| 0 | |||
| CA3100E18-12PB05-15 | ITT Interconnect Solutions |
| 0 | |||
| CA3100R18-12SF80 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| CA3102E18-12PBF80A232F0 | ITT Interconnect Solutions |
| 0 | |||
| CA3102E18-12SA206 | ITT Interconnect Solutions |
| 0 | |||
| CA3108R18-12S | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| S1015-1812-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE11E1812-4 | SOURIAU-SUNBANK |
| 0 | |||
| SE16C1812A1.5ES34 | SOURIAU-SUNBANK |
| 0 | |||
| SE16F1812F2.0R34 | SOURIAU-SUNBANK |
| 0 | |||
| SE1CR1812A-1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 1218125-2 | TE Connectivity | M24308 rectangular RoHS : Not Compliant |
| 949 | |
| DW-18-12-G-D-795 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 201 | ||
| EW-18-12-G-D-800 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 108 | ||
| MS3459W18-12PY | Conesys | Self Locking Plug |
| 101 | ||
| ACC01A18-12PZ-003-LC | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 98 | ||
| ACC04E18-12PW-003-LC | Amphenol Corporation | CONNECTOR |
| 98 | ||
| ACC05A18-12P-003-LC | Amphenol Corporation | CONNECTOR |
| 98 | ||
| TW-18-12-G-D-400-085 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 63 | ||
| TW-18-12-L-D-765-082 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 55 | ||
| ACS06E18-12P-003-116 | Amphenol Corporation | CONNECTOR |
| 26 | ||
| ACC06R18-12PZ-025-B30-LC | Amphenol Corporation | CONNECTOR |
| 26 | ||
| ESW-118-12-G-D-LL | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 25 | ||
| FTD1812GRM | Altech Corporation | WIRE CONNECTOR,2x18AWG/1.0sqmm |
| 22 | ||
| ESW-118-12-L-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 22 | ||
| BNX21AU90-1812AX | TE Connectivity | Connectors RoHS : Compliant |
| 3 | ||
 PUI | R1812-075-33-R | 1,500 | ||||
 Richardson RFPD | R411812122 | Radiall | Attenuator 26.5GHz 12dB RoHS : Compliant | 0 | ||
| C1812C221KDRACTU | KEMET Corporation | Cap Ceramic 220pF 1000V X7R 10% Pad SMD 1812 125C RoHS : Compliant | 0 | |||
| LT1812CS5#TRMPBF | Analog Devices Inc | Op Amp Single High Speed Amplifier ±6.3V/12.6V Aut RoHS : Compliant |
| 0 | ||
PTS181230V020 | Eaton Corporation | PTC Resettable Fuse 0.2A(hold) 0.4A(trip) 30VDC 10 RoHS : Compliant | 0 | |||
| ATS-EXL118-1220-R0 | Advanced Thermal Solutions Inc | Extrusion Profile Heat Sink RoHS : Compliant |
| 0 | ||
| 1812NPO472KT5AT | Kyocera AVX Components | CAP-RESALE RoHS : Compliant |
| 0 | ||
| SI5338C-B11812-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| R411812000 | Radiall | Fixed Coaxial Attenuators 15GHz 11dB RoHS : Compliant |
| 0 | ||
| 095-850-218-120 | Amphenol Corporation | Cable Assembly Belden 4694R 3.048m HD-BNC to BNC M RoHS : Compliant |
| 0 | ||
| C1812C333JAGACAUTO | KEMET Corporation | Cap Ceramic 0.033uF 250V C0G 5% Pad SMD 1812 125C RoHS : Compliant | 0 | |||
| SKY18120 | Skyworks Solutions Inc | RF Switch SP9T 400MHz to 2.7GHz 15dB 16-Pin MCM EP RoHS : Compliant | 0 | |||
| BMA-5018-12-TRM-02 | Cinch Connectivity Solutions | Panel Feedthrough Female Jack RF Connector, Thread RoHS : Compliant | 0 | |||
| AISM-1812-102K-T | Abracon Corporation | Inductor RF Molded Wirewound 1000uH 10% 252KHz 20Q RoHS : Compliant | 0 | |||
| LT1812CS8#PBF | Analog Devices Inc | Op Amp Single High Speed Amplifier ±6.3V/12.6V Aut RoHS : Compliant |
| 0 | ||
| LT1812IS5#TRMPBF | Analog Devices Inc | Op Amp Single High Speed Amplifier ±6.3V/12.6V Aut RoHS : Compliant |
| 0 | ||
 Rutronik | CC1812JKNPOCBN102 | YAGEO Corporation | KC 1,0nF 1812 5% 1000V NP0 RoHS : Compliant |
| 24,000 | |
| C1812C103KDRAC7800 | KEMET Corporation | KC 10nF 1812 10% 1000V X7R RoHS : Compliant |
| 9,000 | ||
| CC1812KKX7R9BB224 | YAGEO Corporation | KC 220nF 1812 10% 50V X7R RoHS : Compliant |
| 7,000 | ||
| C1812C102KGRAC7800 | KEMET Corporation | KC 1,0nF 1812 10% 2000V X7R RoHS : Compliant |
| 5,000 | ||
| C1812C224KCRAC7800 | KEMET Corporation | KC 220nF 1812 10% 500V X7R RoHS : Compliant |
| 5,000 | ||
| CC1812JKNPO0BN103 | YAGEO Corporation | KC 10nF 1812 5% 100V NP0 RoHS : Compliant |
| 5,000 | ||
| CC1812JKNPO9BN103 | YAGEO Corporation | KC 10nF 1812 5% 50V NP0 RoHS : Compliant |
| 5,000 | ||
| C1812X223KDRAC7800 | KEMET Corporation | KC 22nF 1812 10% 1000V X7R STAG RoHS : Compliant |
| 3,000 | ||
| C1812C103KGRAC7800 | KEMET Corporation | KC 10nF 1812 10% 2000V X7R RoHS : Compliant |
| 2,500 | ||
| C1812C103KGRACAUTO7210 | KEMET Corporation | KC 10nF 1812 10% 2000V X7R AECQ RoHS : Compliant |
| 2,000 | ||
| CC1812JKX7R9BB334 | YAGEO Corporation | KC 330nF 1812 5% 50V X7R RoHS : Compliant |
| 2,000 | ||
| CC1812KKX7R9BB474 | YAGEO Corporation | KC 470nF 1812 10% 50V X7R RoHS : Compliant |
| 2,000 | ||
| CC1812KKX7RABB104 | YAGEO Corporation | KC 100nF 1812 10% 200V X7R RoHS : Compliant |
| 2,000 | ||
| CC1812JKNPOCBN101 | YAGEO Corporation | KC 100pF 1812 5% 1000V NP0 RoHS : Compliant |
| 1,000 | ||
| CC1812KKX7R0BB474 | YAGEO Corporation | KC 470nF 1812 10% 100V X7R RoHS : Compliant |
| 1,000 | ||
 Chip 1 Exchange | CWS1812-102JTR | INSTOCK | 22,500 | |||
| 25618.123.111 | INSTOCK | 9,600 | ||||
| 18125A103JAT2A | INSTOCK | 8,000 | ||||
| 1812J1000123GCT | Syfer Technology | INSTOCK RoHS : Compliant | 4,800 | |||
| 1812702 | TE Connectivity | INSTOCK | 4,790 | |||
| 1812C334KA8AUJ | Kyocera AVX Components | INSTOCK | 4,000 | |||
| C1812C122KZRACTU | KEMET Corporation | INSTOCK RoHS : Compliant | 4,000 | |||
| VJ1812Y224KXAAT | INSTOCK | 3,020 | ||||
| 18125C684KAT1A | INSTOCK | 2,762 | ||||
| C1812C104J5JACAUTO | KEMET Corporation | INSTOCK RoHS : Compliant | 1,603 | |||
| C1812X223K102T | INSTOCK | 1,000 | ||||
| 1812LS-684XJBC | INSTOCK | 927 | ||||
| YAGCC1812JKNPOEBN470 | YAGEO Corporation | INSTOCK | 693 | |||
| 18125C105MAT2A | Kyocera AVX Components | INSTOCK RoHS : Compliant | 150 | |||
| M22759/18-12-4 | INSTOCK | 100 | ||||
 Avnet Abacus | C1812C104KDRAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor 01 uF 1 kV 1812 4532 Metric 10 X7R C Series - Tape and Reel (Alt: C1812C104KDRAC7800) RoHS : Compliant | 48,000 | ||
| C1812C102KHRAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor 1000 pF 3 kV 1812 4532 Metric 10 X7R C Series - Tape and Reel (Alt: C1812C102KHRAC7800) RoHS : Compliant | 30,000 | |||
| 18121C474KAT2A | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor 047 uF 100 V 1812 4532 Metric 10 X7R 45 mm 32 mm - Tape and Reel (Alt: KGM43FR72A474KV) RoHS : Compliant | 25,000 | |||
| C1812V104KDRAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor 01 uF 1 kV 1812 4532 Metric 10 X7R ArcShield HV Series - Tape and Reel (Alt: C1812V104KDRAC7800) RoHS : Compliant | 24,000 | |||
| PTS181230V020 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 30 VDC 200 mA 400 mA 002 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant | 8,000 | |||
| C1812C334K5RAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor 033 uF 50 V 1812 4532 Metric 10 X7R C Series (Alt: C1812C334K5RAC7800) RoHS : Compliant | 7,000 | |||
| CC1812KKX7REBB102 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 1000 pF 3 kV 1812 4532 Metric 10 X7R CC Series 458 mm - Tape and Reel (Alt: CC1812KKX7REBB102) RoHS : Compliant | 6,000 | |||
| CC1812KKX7R9BB224 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 022 uF 50 V 1812 4532 Metric 10 X7R CC Series 45 mm (Alt: CC1812KKX7R9BB224) RoHS : Compliant | 3,000 | |||
| MLV1812E33003T | Vishay Intertechnologies | TVS Varistor 30 VAC 38 VDC MLV1812E3 88 V 1812 4532 Metric Multilayer Varistor MLV (Alt: MLV1812E33003T) RoHS : Compliant | 2,000 | |||
| VJ1812Y103KXGAT | Vishay Intertechnologies | SMD Multilayer Ceramic Capacitor 10000 pF 1 kV 1812 4532 Metric 10 X7R - Tape and Reel (Alt: VJ1812Y103KXGAT) RoHS : Compliant | 2,000 | |||
| C1812C103KDRAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor 001 uF 1 kV 1812 4532 Metric 10 X7R C Series - Tape and Reel (Alt: C1812C103KDRAC7800) RoHS : Compliant | 2,000 | |||
| VJ1812Y474KXBAT | Vishay Intertechnologies | SMD Multilayer Ceramic Capacitor 047 F 100 V 1812 4532 Metric 10 X7R - Tape and Reel (Alt: VJ1812Y474KXBAT) RoHS : Compliant | 1,000 | |||
| VJ1812A223FXAAT | Vishay Intertechnologies | - Tape and Reel (Alt: VJ1812A223FXAAT) RoHS : Compliant | 1,000 | |||
| CC1812KKX7R0BB474 | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 047 uF 100 V 1812 4532 Metric 10 X7R CC Series 45 mm - Tape and Reel (Alt: CC1812KKX7R0BB474) RoHS : Compliant | 1,000 | |||
| FX18-120P-0.8SV | Hirose Electric Co Ltd | Mezzanine Connector Header 08 mm 2 Rows 120 Contacts Surface Mount Phosphor Bronze (Alt: CL0579-0020-7-00) RoHS : Compliant | 560 | |||
Avnet Asia | C1812C104J2GACAUTO | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.1 uF, 200 V, 1812 [4532 Metric], ? 5%, C0G / NP0, C Series (Alt: C1812C104J2GACAUTO) RoHS : Compliant |
| 5,000 | |
| C1812V334KCRACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.33 uF, 500 V, 1812 [4532 Metric], ? 10%, X7R (Alt: C1812V334KCRACTU) RoHS : Compliant |
| 2,500 | ||
| 18121C104KAT2A | Kyocera AVX Components | (Alt: 18121C104KAT2A) RoHS : Compliant | 2,000 | |||
| 18123D106MAT2A | Kyocera AVX Components | (Alt: 18123D106MAT2A) RoHS : Compliant | 2,000 | |||
| 18121C474KAT2A | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 0.47 uF, 100 V, 1812 [4532 Metric], ? 10%, X7R, 4.5 mm, 3.2 mm (Alt: 18121C474KAT2A) RoHS : Compliant | 1,000 | |||
| 1812GC472KAT1A | Kyocera AVX Components | SMD Multilayer Ceramic Capacitor, 4700 pF, 2 kV, 1812 [4532 Metric], ? 10%, X7R, 4.5 mm, 3.2 mm (Alt: 1812GC472KAT1A) RoHS : Compliant | 1,000 | |||
| C1812C103KDRAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.01 uF, 1 kV, 1812 [4532 Metric], ? 10%, X7R, C Series (Alt: C1812C103KDRAC7800) RoHS : Compliant |
| 0 | ||
| C1812C335K1RAC7800 | KEMET Corporation | Multilayer Ceramic Capacitor, 3.3 uF, 100 V, ? 10%, X7R, 1812 [4532 Metric] (Alt: C1812C335K1RAC7800) RoHS : Compliant | 0 | |||
| 18123C105KAZ2A | Kyocera AVX Components | (Alt: 18123C105KAZ2A) RoHS : Compliant | 0 | |||
| VJ1812Y224KXAAT | Vishay Intertechnologies | SMD Multilayer Ceramic Capacitor, 0.22 ?F, 50 V, 1812 [4532 Metric], ? 10%, X7R (Alt: VJ1812Y224KXAAT) RoHS : Compliant | 0 | |||
| C1812V104KDRAC7800 | KEMET Corporation | (Alt: C1812V104KDRAC7800) RoHS : Compliant | 0 | |||
| PTS181224V110 | Eaton Corporation | SMD Resettable Fuse, PPTC, 1812 (4532 Metric), PTS1812, 24 VDC, 1.1 A, 2.2 A, 500 ms (Alt: PTS181224V110) RoHS : Compliant | 0 | |||
| 18125C105MAT2A | Kyocera AVX Components | (Alt: 18125C105MAT2A) RoHS : Compliant | 0 | |||
| 1812GC682KAT2A | Kyocera AVX Components | (Alt: 1812GC682KAT2A) RoHS : Compliant | 0 | |||
| 1812PC474KAT2A | Kyocera AVX Components | (Alt: 1812PC474KAT2A) RoHS : Compliant | 0 | |||
 Avnet Silica | PIC16F18125-E/7NVAO | Microchip Technology Inc | 14KB Flash 1KB RAM 256B EEPROM 12b Diff ADCC 2x16bit dual PWM 2x8bit DAC (Alt: PIC16F18125-E/7NVAO) RoHS : Compliant | 273 | ||
| MD1812K6-G | Microchip Technology Inc | MOSFET DRVR 2A 4OUT HiLo Side InvNonInv 16Pin QFN TR (Alt: MD1812K6-G) RoHS : Compliant | 0 | |||
| XC61FN1812MRN | Torex Semiconductor LTD | Volt Supervisor Detector With Built In Delay Circuit 1836V 07V to 10V 3Pin SOT23 TR (Alt: XC61FN1812MRN) RoHS : Compliant | 0 | |||
| XC61FN1812MR-G | Torex Semiconductor LTD | Volt Supervisor Detect WDelay Circuit 1836V 10V 3Pin SOT23 TR (Alt: XC61FN1812MR-G) RoHS : Compliant | 0 | |||
| 72T18125L5BBGI | Renesas Electronics Corporation | (Alt: 72T18125L5BBGI) RoHS : Compliant | 0 | |||
| PIC16F18126-E/7N | Microchip Technology Inc | (Alt: PIC16F18126-E/7N) RoHS : Compliant | 0 | |||
| PIC16F18124-I/ST | Microchip Technology Inc | (Alt: PIC16F18124-I/ST) RoHS : Compliant | 0 | |||
| L2C5-50701812F2300 | Lumileds | (Alt: L2C5-50701812F2300) RoHS : Compliant | 0 | |||
| L2C5-40801812G2300 | Lumileds | (Alt: L2C5-40801812G2300) RoHS : Compliant | 0 | |||
| L2C5-40701812F2300 | Lumileds | (Alt: L2C5-40701812F2300) RoHS : Compliant | 0 | |||
| PIC16F18125T-E/7NVAO | Microchip Technology Inc | 14KB Flash 1KB RAM 256B EEPROM 12b Diff ADCC 2x16bit dual PWM 2x8bit DAC (Alt: PIC16F18125T-E/7NVAO) RoHS : Compliant | 0 | |||
| MCS1812GY-5-080-BA-P | Monolithic Power Systems | Isolated Coreless 5A to 100A Linear HallEffect Current Sensor with Fast OCD (Alt: MCS1812GY-5-080-BA-P) RoHS : Compliant | 0 | |||
| F18127_DAISY-MINI-WWW-D | LEDIL | Linear Lens 65 PMMA 2795 X 21 X 133mm Milky Box (Alt: F18127_DAISY-MINI-WWW-D) RoHS : Compliant | 0 | |||
| ALVIUM G1-812 UV CS-MOUNT | Allied Vision Technologies GmbH | Sony IMX487 UV 23 2856x2912 CMOS GS CSMount closed 14fps GigE 29x29x36mm 65g (Alt: 18364) RoHS : Compliant | 0 | |||
| MCQ1812GY-3-010-BA-AEC1-Z | Monolithic Power Systems | SOIC16 WB AUTOMOTIVEGRADE LINEAR HALLEFFECT CURRENT SENSOR (Alt: MCQ1812GY-3-010-BA-AEC1-Z) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AMCV-1812H-220-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISM-1812H-121K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIAC-1812-39NJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-120K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-1R8K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1812H-180-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-331K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-R56M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1812H-300-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-220K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812H-181K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-330K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-1R0K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-5R6K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-681K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Chip-Germany GmbH | 4,18121E+11 | Wurth Elektronik | 322 | |||
| HNP18-120 | HN Electronic Components GmbH & Co Kg | 15 | ||||
 Component Electronics, Inc | VJ1812Y103KXGAT | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 57,000 | |
| BCR1/8-1210FT | TT electronics / BI Technologies | IN STOCK SHIP TODAY |
| 4,800 | ||
| RMC18-121JT | Megastar Electroniques | IN STOCK SHIP TODAY |
| 4,500 | ||
| IMC-1812-100UH-5%-R13 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,900 | ||
| C1812C224M1RAC7800 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,447 | ||
| 1812B104M201NT | Novacap | IN STOCK SHIP TODAY RoHS : Not Compliant | 970 | |||
| 1812LS-684XJBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 620 | ||
| P1812R-222K | API Delevan | IN STOCK SHIP TODAY RoHS : Compliant |
| 500 | ||
| P1812R-562K | API Delevan | IN STOCK SHIP TODAY RoHS : Compliant |
| 500 | ||
| VJ1812Y474KXAMT | Vishay Vitramon | IN STOCK SHIP TODAY RoHS : Compliant |
| 430 | ||
| 1812900000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant | 148 | |||
| 18125C105MAT2A | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 123 | ||
| CE156F18-12 | Panduit Corp | IN STOCK SHIP TODAY |
| 59 | ||
| S1812R-474K | API Delevan | IN STOCK SHIP TODAY RoHS : Compliant |
| 56 | ||
| C1812C152J5RAC | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
 DB Roberts | 1812 | Heyco | RDD 200-2-90 BLACK | 0 | ||
| 18123B-S-0632 | RAF Electronic Hardware | 0 | ||||
| HFED-0518-12ZI | PennEngineering (PEM) | DOG PT STUD,ENLARG HEAD STEEL 5/16-18THREAD | 0 | |||
| HV18120A | Essentra Components | HOOK - V STYLESPRING STEEL | 0 | |||
| 18127C-A-0632-6 | RAF Electronic Hardware | 0 | ||||
| 47-60-181-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| CAL1-8125-7.9 | SHEREX FASTENING SO | 0 | ||||
| FLEX18-12078 | SHEREX FASTENING SO | 0 | ||||
| HFHB-0518-12X | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| DM0218-1/2B | Essentra Components | 0.218 ID 0.500 LENGTHPVC DIP Y | 0 | |||
| 47-92-181-24 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 1812-1032AL7MODL3-3/8 | RAF Electronic Hardware | 0 | ||||
| 11812 | Essentra Components | STRAIGHT PLUG - NON THRDGREEN | 0 | |||
| FLEX18-12063 | SHEREX FASTENING SO | 0 | ||||
| FLEX18-12012 | SHEREX FASTENING SO | 0 | ||||
 EBV Elektronik | F18127_DAISY-MINI-WWW-D | LEDIL | Linear Lens 65 PMMA 2795 X 21 X 133mm Milky Box (Alt: F18127_DAISY-MINI-WWW-D) RoHS : Compliant | 96 | ||
| S00018120253 | SIMCom | N6 speaker (Alt: S00018120253) RoHS : Not Compliant | 0 | |||
| NJG1812ME4-TE1 | Nisshinbo Micro Devices | (Alt: NJG1812ME4-TE1) RoHS : Compliant | 0 | |||
| EMC1812T-AE/RW | Microchip Technology Inc | (Alt: EMC1812T-AE/RW) RoHS : Compliant | 0 | |||
LPC1812JBD144E | NXP Semiconductors | MCU 32Bit LPC1800 ARM Cortex M3 RISC 512KB Flash 33V 144Pin LQFP Tray (Alt: LPC1812JBD144E) RoHS : Compliant | 0 | |||
| EMC1812T-1E/RW | Microchip Technology Inc | (Alt: EMC1812T-1E/RW) RoHS : Compliant | 0 | |||
| PIC16F18125-I/P | Microchip Technology Inc | (Alt: PIC16F18125-I/P) RoHS : Compliant | 0 | |||
| PIC16F18125-I/7N | Microchip Technology Inc | (Alt: PIC16F18125-I/7N) RoHS : Compliant | 0 | |||
| PIC16F18125-I/ST | Microchip Technology Inc | (Alt: PIC16F18125-I/ST) RoHS : Compliant | 0 | |||
| PIC16F18126-E/7N | Microchip Technology Inc | (Alt: PIC16F18126-E/7N) RoHS : Compliant | 0 | |||
| PIC16F18124-I/ST | Microchip Technology Inc | (Alt: PIC16F18124-I/ST) RoHS : Compliant | 0 | |||
| MCP1812AT-028/7QX | Microchip Technology Inc | (Alt: MCP1812AT-028/7QX) RoHS : Compliant | 0 | |||
| PIC16F18124T-I/SL | Microchip Technology Inc | 8bit MCU PIC 32 MHz 7 KB 512 MB 14 Pins SOIC (Alt: PIC16F18124T-I/SL) RoHS : Compliant | 0 | |||
| BXEP-40C-181-24B-00-00-0 | Bridgelux Inc | Full Flux and Full Vf Bins (Alt: BXEP-40C-181-24B-00-00-0) RoHS : Compliant | 0 | |||
| BXEP-30G-181-24B-00-00-0 | Bridgelux Inc | Full Flux and Full Vf Bins (Alt: BXEP-30G-181-24B-00-00-0) RoHS : Compliant | 0 | |||
 ECCO | 97-3102A-18-12SY | Amphenol Industrial Operations |
| 101 | ||
| MS3100A18-12S | Amphenol Industrial Operations |
| 101 | |||
| 97-3100A-18-12S(541) | Amphenol Industrial Operations | 101 | ||||
| 97-3102A-18-12S(621) | Amphenol Industrial Operations |
| 101 | |||
| 97-3102A-18-12S(639) | Amphenol Industrial Operations |
| 101 | |||
| MS3106A18-12S | Amphenol Industrial Operations |
| 101 | |||
| 97-3100A-18-12SW | Amphenol Industrial Operations |
| 101 | |||
| 97-3106A-18-12S(417) | Amphenol Industrial Operations |
| 101 | |||
| 97-4106A-18-12P(621) | Amphenol Industrial Operations |
| 100 | |||
| 97-18-12S | Amphenol Industrial Operations |
| 51 | |||
| 97-18-12S | Amphenol Industrial Operations |
| 51 | |||
| 97-3107A-18-12S | Amphenol Industrial Operations |
| 34 | |||
| 97-4107A-18-12P(662) | Amphenol Industrial Operations |
| 34 | |||
| 97-18-12P(431) | Amphenol Industrial Operations |
| 31 | |||
| 97-18-12P(431) | Amphenol Industrial Operations |
| 31 | |||
 FDH Electronics | M22759/18-12-1 | Helistrand Inc | Wire and Cable |
| 177 | |
| MS3456KS18-12BW | Corsair Electrical Connectors Inc | Connector |
| 66 | ||
| MS3456KS18-12S | Corsair Electrical Connectors Inc | Connector 5015 |
| 66 | ||
| MS3450L18-12S | Corsair Electrical Connectors Inc | Circular Conn |
| 35 | ||
| MS3404D18-12D | Corsair Electrical Connectors Inc | Connector 5015 |
| 27 | ||
| MS3451LS18-12PW-LC | Corsair Electrical Connectors Inc | Connector |
| 26 | ||
| 711-1812-C13 | Corsair Electrical Connectors Inc | Connector 38999 | 25 | |||
| 721-1812-D13 | Corsair Electrical Connectors Inc | Connector 38999 | 25 | |||
| SE9C1812A1.25-34 | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| 370DS002NF1812A5 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 1218125-2 | TE Connectivity | Connector RoHS : Not Compliant |
| 0 | ||
| MS3181-22CAL | SPI Connects | Connector 26482 |
| 0 | ||
| MS3181-22CAL | Glenair Inc | Backshells & Ac |
| 0 | ||
| MS3181-24RL | SPI Connects | Connector 26482 |
| 0 | ||
| 805-002-16NF18-12SA | Glenair Inc | Circular Conn RoHS : Not Compliant |
| 0 | ||
 Flip Electronics | LPC1812JBD144E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 692 | |
LPC1812JBD144 | NXP Semiconductors | Stock RoHS : Compliant | 240 | |||
 Maritex | 2-520181-2 | TE Connectivity | Quick Connect, Disconnect Terminals; 2-520181-2; TE CONNECTIVITY; Brass; Tin; Tin; 4.7498 mm RoHS : Compliant |
| 165,215 | |
| 1812L150/24MR | Littelfuse Inc | PTC Resettable Fuses; 1812L150/24MR; LITTELFUSE; 3 A; 1.5 A; 20 A; 1812 RoHS : Compliant |
| 66,334 | ||
| 1812L075/33DR | Littelfuse Inc | PTC Resettable Fuses; 1812L075/33DR; LITTELFUSE; 1.5 A; 750 mA; 1812; 100 A RoHS : Compliant |
| 59,027 | ||
| 1812L110/33MR | Littelfuse Inc | PTC Resettable Fuses; 1812L110/33MR; LITTELFUSE; 1.95 A; 1.1 A; 20 A; 1812 RoHS : Compliant |
| 49,023 | ||
| 1812L300/24SLER | Littelfuse Inc | PTC Resettable Fuses; 1812L300/24SLER; LITTELFUSE RoHS : Compliant |
| 16,840 | ||
1812L050/60MR | Littelfuse Inc | PTC Resettable Fuses; 1812L050/60MR; LITTELFUSE; 1 A; 500 mA; 150 ms; 1812 RoHS : Compliant |
| 8,309 | ||
| 71918-120LF | Amphenol Corporation | Male Pin Headers; 71918-120LF; AMPHENOL; 2; Gold; 20; 20 |
| 2,137 | ||
| LPH-18-12 | Mean Well | Power Supply; LED; 18W; 12V; 1.5A; 180-264VAC; 254-370VDC RoHS : Compliant |
| 1,970 | ||
| HSA-0918-1200B | Shenzhen hongsense Technology Co Ltd | Antenna; stick; GSM; 850-2100MHz; 2.0dBi; VSWR<2.0; linear; omni-directional; RG174; 3m; SMA; magnetic; fi30x111mm; black |
| 300 | ||
| MA1812CG-101J-302PR 100PF 3000V 5% NP0 | POE | Ceramic capacitor SMD; 1812; 100pF; 3000V; NP0; 5% |
| 192 | ||
| 71918-126LF | Amphenol Corporation | Male Pin Headers; 71918-126LF; AMPHENOL; 2; Gold; 26; 26 |
| 114 | ||
| 1812L050PR | Littelfuse Inc | PTC Resettable Fuses; 1812L050PR; LITTELFUSE; 1 A; 500 mA; 150 ms; 1812 RoHS : Compliant |
| 9 | ||
| 1812L110/16DR | Littelfuse Inc | PTC Resettable Fuses; 1812L110/16DR; LITTELFUSE; 1.95 A; 1.1 A; 1812; 100 A RoHS : Compliant |
| 3 | ||
| 1812L260/16MR | Littelfuse Inc | PTC Resettable Fuses; 1812L260/16MR; LITTELFUSE; 5 A; 2.6 A; 2 mm RoHS : Compliant |
| 3 | ||
| 1812L075/24DR | Littelfuse Inc | PTC Resettable Fuses; 1812L075/24DR; LITTELFUSE; 750 mA; 1.5 A; 110 m?; 100 A RoHS : Compliant |
| 1 | ||
 Master Electronics | ESQ-118-12-S-D-LL | Samtec Inc | Conn Board Stacker RCP 36 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | |
| ESW-118-12-G-D-LL | Samtec Inc | .100 Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-181-203 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-181-206 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-181-210 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-218-127 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-04-04-L-D-518-120 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| ECS-3518-1250-B-TR | ECS International Inc | Crystal Oscillator - 125.000MHz - HCMOS - 1.8V - ±50ppm 0°C to 70°C - 25mA - SMD - 0.197 x 0.126 (5.00mm x 3.20mm) RoHS : Compliant |
| 0 | ||
| FRCIR03R-18-12P-F80-T39-V0 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| FRCIR06R-18-12P-F80-T108-V | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| FTD1812GRM | Altech Corporation | WIRE CONNECTOR 2X18AWG/1.0 RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-118-121 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EW-18-12-S-T-635 | Samtec Inc | Conn Board Stacker HDR 54 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| BA1-B0-26-618-12A-D | Carling Technologies | Single-pole hydraulic-magnetic circuit breaker with handle actuator 18A current rating AC long delay and front panel snap-in mounting. RoHS : Compliant |
| 0 | ||
| CA08COM-PG18-12S-F0 | ITT Interconnect Solutions | Circular Connector - 90° Plug - Contact Arrangement: 18-12 - Sockets - Threaded Coupling - Adapter for PG RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C0218-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Cable 12 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male cable 12 inch length using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 12 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C0218-12, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C0218-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 12 inch length using LMR-400-UF coax. |
| 3,837 | |
| PE3W10618-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. QMA Male to TNC Male Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly QMA male to TNC male cable 12 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male to TNC male cable 12 inch length using RG142 coax, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QMA cable connection on one end and TNC cable connection on the other. Our QMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W10618-12 can also be known as a QMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. QMA plug to TNC plug cable assembly PE3W10618-12 is built with RG142 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with QMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency QMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10618-12 can also be used in the other direction and will be TNC male to QMA male cable assembly if the opposite connectivity is required. QMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to TNC cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to TNC male cable 12 inch length using RG142 coax. |
| 752 | ||
| PE3518-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 12 inches. C Male to C Male Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly C male to C male cable 12 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. C male to C male cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom C type to type C cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type C cable connection on one end and type C cable connection on the other. Our type C to C type cable assemblies have a male gender on end 1 and male on end 2. This C type to type C cable is a male to male coax assembly, PE3518-12, can also be known as a type C plug to C type plug cable assembly and will be shipped same-day as it is purchased. Type C plug to type C plug cable assembly PE3518-12 is built with RG142 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with type C to C type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type C male to type C male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type C plug to type C plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality C type to type C cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this C male to C male cable 12 inch length using RG142 coax. |
| 375 | ||
| PE3M0318-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Female Cable 12 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0318-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0318-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0318-12 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ pin to SMA female cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0318-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 48 | ||
| PE3C6181-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-SPP250-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6181-24, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly PE3C6181-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 21 | ||
| PE3C0718-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Female to 2.92mm Female Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly 2.92mm female to 2.92mm female cable 12 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm female cable 12 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a female gender on end 1 and female on end 2. PE3C0718-12 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped same-day as it is purchased. 2.92mm jack to 2.92mm jack cable assembly PE3C0718-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.92mm female to 2.92mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm jack to 2.92mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm female to 2.92mm female cable 12 inch length using PE-047SR coax. |
| 14 | ||
| PE3W07181-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to TNC Male Right Angle Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male to TNC male right angle cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male right angle cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle TNC cable connection on the other. Our SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3W07181-24, can also be known as a SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W07181-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07181-24 can also be used in the other direction and will be right angle TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male right angle cable 24 inch length using PE-SR405FLJ coax. |
| 5 | ||
| PE3W18124/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using TCOM-400 Coax with HeatShrink. PE3W18124/HS is a N male right angle to N male right angle cable using TCOM-400 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18124/HS N male right angle to N male right angle cable assembly is constructed with TCOM-400 coax. | 0 | |||
| PE3C5918-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 50 Ohm SMA Male Right Angle to 75 Ohm BNC Male Right Angle Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 50 Ohm SMA male right angle to 75 Ohm BNC male right angle cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 50 Ohm SMA male right angle to 75 Ohm BNC male right angle cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle BNC cable connection on the other. Our right angle SMA to right angle BNC cable assembly has male gender on end 1 and male on end 2. PE3C5918-12 can also be known as a right angle SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to BNC plug cable assembly PE3C5918-12 is built with RG179 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5918-12 RF cable are available on our downloadable PDF datasheet.PE3C5918-12 can also be used in the other direction and will be right angle BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3218-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to 7/16 DIN Male Cable 12 Inch Length Using RG214 Coax., Radio frequency assembly N male to 7/16 DIN male cable 12 inch length using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 12 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3218-12, can also be known as a type N plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. N type plug to 7/16 DIN plug cable assembly PE3218-12 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3218-12 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 12 inch length using RG214 coax. |
| 0 | ||
| PE3W01812 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. QD SMA Male to Reverse Polarity SMA Female Cable Using RG142 Coax. PE3W01812 is a SMA male to reverse polarity SMA female cable using RG142 coax. This Pasternack SMA male to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01812 SMA male to SMA reverse polarity female cable assembly is constructed with RG142 coax. | 0 | |||
| PE3C3918-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly N male to N female bulkhead low loss cable 12 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female bulkhead low loss cable 12 inch length using LMR-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C3918-12 can also be known as a low loss N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C3918-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3918-12 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead low loss cable 12 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3W18129LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to Snap-On BMA Jack Cable Using PE-SR402FLJ Coax with HeatShrink, LF Solder. PE3W18129LF/HS is a BMA jack 2 hole flange to BMA jack cable using PE-SR402FLJ coax. This Pasternack BMA jack 2 hole flange to BMA jack cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm BMA for connector 2. Our jack BMA 2 hole flange to jack BMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18129LF/HS BMA jack 2 hole flange to BMA jack cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE35118-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE35118-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE35118-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using PE-047SR coax. |
| 0 | ||
| PE3M0418-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Size: 16, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPS Size 16 Contact Socket to SMPS Size 16 Contact Socket Cable 12 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0418-12 from Pasternack is a D38999 contact cable assembly that is built with a size 16 SMPS socket contact connection on one end and a SMPS socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This SMPS to SMPS cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 50 GHz. The PE3M0418-12 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our SMPS socket to SMPS socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The PE3M0418-12 in-series RF cable has 90 dB of minimum RF shielding. SMPS socket to SMPS socket cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0418-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this SMPS to SMPS RF cable are available on our downloadable PDF datasheet. SMPS socket to SMPS socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMPS RF cable assembly as per your requirements. |
| 0 | ||
 Relay Specialties | R1812-075-33-R | OptiFuse | PTC Fuse; 0.75 A; 33 VDC; 1812 SMD; Castellated |
| 1,500 | |
 TE Connectivity | 2-520181-2 | TE Connectivity | ULTRA-FAST 187 ASY REC 22-18 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Fully Insulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 4.75 mm Receptacle Fully Insulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | TE Connectivity RoHS : Compliant |
| 185,895 | |
| 170181-2 | TE Connectivity | 205 FASTON,REC.,22-18 AWG,BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 5.21 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | TE Connectivity RoHS : Compliant |
| 55,477 | ||
| 2-1318120-3 | TE Connectivity | DYNAMIC D2100 REC HSG 3P SGL Y Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp 3 Receptacle Housing With | TE Connectivity RoHS : Compliant |
| 34,402 | ||
| 1318125-1 | TE Connectivity | DYNAMIC D2100 HDR V ASSY 8P PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 8 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 8 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 32,272 | ||
| 181270-3 | TE Connectivity | MOD 2 BUCHSE Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 22 – 26 AWG Operating Voltage: 40 VAC Gold (Au) Socket Gold Flash 22 – 26 AWG | TE Connectivity RoHS : Compliant |
| 10,339 | ||
| 1-1318120-3 | TE Connectivity | DYNAMIC D-2100 REC HSG 3P Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp 3 Receptacle Housing With | TE Connectivity RoHS : Compliant |
| 10,232 | ||
| 181270-2 | TE Connectivity | MOD II CONTACT L.P. Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 23 – 26 AWG Operating Voltage: 40 VAC Gold (Au) Socket Gold Flash 23 – 26 AWG | TE Connectivity RoHS : Compliant |
| 6,824 | ||
| 160181-2 | TE Connectivity | RING TONGUE IS 3.1-5.3 MM2 TPBR Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 3.1 – 5.3 mm² Wire Size: 6529 – 10382 CMA Stud Size: M6 Closed Ring Tongue Terminal 12 – 10 AWG 3.1 – 5.3 mm² 6529 – 10382 CMA | TE Connectivity RoHS : Compliant |
| 6,368 | ||
| 181271-2 | TE Connectivity | MOD 2 CONTACT REC. Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Size: 30 – 28 AWG Wire Size: .05 – .09 mm² Termination Method to Wire & Cable: Crimp Gold (Au) Socket 30 – 28 AWG .05 – .09 mm² | TE Connectivity RoHS : Compliant |
| 4,829 | ||
| 181270-1 | TE Connectivity | AMP-MODU CONTACT Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 22 – 26 AWG Operating Voltage: 40 VAC Gold (Au) Socket Gold Flash 22 – 26 AWG | TE Connectivity RoHS : Compliant |
| 3,519 | ||
| 1318124-2 | TE Connectivity | DYNAMIC D2100 HDR V ASSY 6P Y PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 2,319 | ||
| 1318123-2 | TE Connectivity | DYNAMIC D2100 HDR V ASSY 3P Y PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 1,830 | ||
| 1318126-2 | TE Connectivity | DYNAMIC D2100 HDR V ASSY 12P Y PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 12 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 1,581 | ||
| 1318124-1 | TE Connectivity | DYNAMIC D2100 HDR V ASSY 6P PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 1,204 | ||
| 1318126-1 | TE Connectivity | DYNAMIC D2100 HDR V ASSY 12P PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 12 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 1,145 | ||
 Venkel Ltd. | C1812C0G101-103KNE | VENKEL LTD | Chip Capacitor;1812;C0G;100V;0.01uF;�10% RoHS : Compliant | 0 | ||
| C1812C0G101-392KNE | VENKEL LTD | Chip Capacitor;1812;C0G;100V;3900pF;�10% RoHS : Compliant | 0 | |||
| C1812C0G102-332JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;1000V;3300pF;�5% RoHS : Compliant | 0 | |||
| C1812C0G201-271JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;200V;270pF;�5% RoHS : Compliant | 0 | |||
| C1812C0G251-681JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;250V;680pF;�5% RoHS : Compliant | 0 | |||
| C1812C0G302-181JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;3000V;180pF;�5% RoHS : Compliant | 0 | |||
| C1812C0G302-270KNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;3000V;27pF;�10% RoHS : Compliant | 0 | |||
| C1812C0G500-102KNE | VENKEL LTD | Chip Capacitor;1812;C0G;50V;1000pF;�10% RoHS : Compliant | 0 | |||
| C1812C0G500-272KNE | VENKEL LTD | Chip Capacitor;1812;C0G;50V;2700pF;�10% RoHS : Compliant | 0 | |||
| C1812C0G500-471JNE | VENKEL LTD | Chip Capacitor;1812;C0G;50V;470pF;�5% RoHS : Compliant | 0 | |||
| C1812C0G501-331JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;500V;330pF;�5% RoHS : Compliant | 0 | |||
| C1812X7R102-103KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;1000V;0.01uF;�10% RoHS : Compliant | 0 | |||
| C1812X7R102-392KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;1000V;3900pF;�10% RoHS : Compliant | 0 | |||
| C1812X7R102-473KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;1000V;0.047uF;�10% RoHS : Compliant | 0 | |||
| C1812X7R201-123KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;200V;0.012uF;�10% RoHS : Compliant | 0 | |||
 Vyrian | 97-181-24 | Amphenol Corporation | Circular Conn Accessory, Dummy Item RoHS : Not Compliant | 18,085 | ||
| VCAS06AG18120YAT3A | KYOCERA AVX | Varistor, Surface Mount | 16,114 | |||
| C1812X224KARACAUTO | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 250V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.22uF, Surface Mount, 1812 | 14,644 | |||
| C1812C104JAGAC7800 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 250V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.1uF, Surface Mount, 1812 | 14,445 | |||
| ISC1812ER560J | Vishay Intertechnologies | General Purpose Inductor, 56uH, 5%, 1 Element, Ferrite-Core, SMD, 1812 RoHS : Compliant | 13,221 | |||
| DS1812Z-10 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, PDSO3 RoHS : Not Compliant | 9,409 | |||
| PTLV1812QDRQ1 | Texas Instruments | Comparator, 2 Func, 4000uV Offset-Max, 420ns Response Time, PDSO8 RoHS : Not Compliant | 9,194 | |||
| 1812PS-223KRC | Coilcraft Inc | General Purpose Inductor, 22uH, 10%, 1 Element, Ceramic-ferrite-Core, SMD, 2320 RoHS : Compliant | 8,079 | |||
| ADM1812-5ART-RL7 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.62VV, CMOS, PDSO3 RoHS : Not Compliant | 6,589 | |||
| TXR41AC00-1812AI | TE Connectivity | Connector Accessory, Backshell, Aluminum Alloy RoHS : Compliant | 6,358 | |||
| ADM1812-5AKS-REEL | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +4.62V, PDSO3 RoHS : Not Compliant | 5,870 | |||
| 1812SC103KA11A | KYOCERA AVX | Ceramic Capacitor, Multilayer, Ceramic, 1500V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.01uF, Surface Mount, 1812 | 744 | |||
| DS1812-5/T&R | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, +4.62VV, CMOS, PBCY3 RoHS : Not Compliant | 396 | |||
| MAX1812EUB-T | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO10 RoHS : Not Compliant | 275 | |||
| C1812C225K1RAC | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, X7R, 15% TC, 2.2uF, Surface Mount, 1812 | 219 | |||
 Waytek, Inc. | 39100-1812 | Molex | 22-12 GA Terminal Block 8 MM EuroStyle 600V 12 POLE 20A REPLACED 47163 47157 |
| 1,846 | |
 Win Source Electronics | MF-MSMF050-2/0.5A/1812 | Bourns Inc |
| 183,150 | ||
| SMD1812P050TF/30 | Littelfuse Inc |
| 61,800 | |||
| 1812L050PR | Littelfuse Inc | PTC Resettable Fuse 0.5A(hold) 1A(trip) 15VDC 100A 0.8W 0.15s 0.15Ohm SMD Solder Pad 1812 T/R / PTC .50A 15VDC RESETTABLE 1812L RoHS : Compliant |
| 58,888 | ||
| 1812L260/12MR | Littelfuse Inc | FUSE PTC RESET 2.6A 12V 1812 SMD RoHS : Compliant |
| 52,000 | ||
| BSMD1812-075-33V | BHFUSE | Polymeric PTC Resettable Fuse 33V 750mA Surface Mount 1812 |
| 44,000 | ||
| 1812L260/16MR | Littelfuse Inc | PTC RESETTABLE 16V 1812 2.60A RoHS : Compliant |
| 18,888 | ||
| 1812L200/16DR | Littelfuse Inc | PTC 16V POLYFUSE SMT 1812 2.00A RoHS : Compliant |
| 6,500 | ||
| CC1812KKX7REBB102 | YAGEO Corporation | CAP CER 1000PF 3KV X7R 1812 / 1000 pF ±10% 3000V (3kV) Ceramic Capacitor X7R 1812 (4532 Metric) RoHS : Compliant |
| 6,331 | ||
| C1812X104K102T | Holy Stone Enterprise Co Ltd | CAP CER 0.1UF 1KV X7R 1812 RoHS : Compliant |
| 5,355 | ||
| 1812B225K101CT | Walsin Technology Corporation | CAP CER 2.2UF 100V X7R 1812 / GaN Doherty Hybrid Amplifier RoHS : Compliant |
| 5,000 | ||
| 18125C105KAT2A | Kyocera AVX Components | CAP CER 1UF 50V X7R 1812 RoHS : Compliant |
| 4,000 | ||
| C1812X103KGRACTU | KEMET Corporation | CAP CER 10000PF 2KV X7R 1812 RoHS : Compliant |
| 3,780 | ||
LT1812IS5 | Linear Technology | 3mA, 100MHz, 750V/us Operational Amplifier with Shutdown RoHS : Not Compliant |
| 3,550 | ||
LT1812IS5#TRMPBF | Linear Technology | IC OPAMP VFB 100MHZ TSOT23-5 RoHS : Compliant |
| 3,220 | ||
| C1812C102KHRAC7800 | KEMET Corporation | CAP CER 1000PF 3KV X7R 1812 / 1000 pF ±10% 3000V (3kV) Ceramic Capacitor X7R 1812 (4532 Metric) RoHS : Compliant |
| 2,870 | ||
 Wuhan P&S | 1812L110/33MR | Littelfuse Inc | 33V,20A,1812 Surface Mount PTC RoHS : Compliant |
| 2,000 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Spanish ▼ 
English
Chinese
German
Japanese
Russian
Korean
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand