160CCNSNNFZCWC Price, Reseller, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1360/SP1-60 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C1360/SP1-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1360/SP1-60 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock.

1 : $179.99
25 : $170.99
50 : $161.99
100 : $154.79

713

PE3M0041-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 N Female Bulkhead to N Female Bulkhead Cable 60 Inch Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to N female bulkhead cable 60 inch length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to N female bulkhead cable 60 inch length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/03-0503 type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and M39012/03-0503 type N bulkhead cable connection on the other. Our M39012/03-0503 type N to M39012/03-0503 N type cable assemblies have a female gender on end 1 and female on end 2. This M39012/03-0503 type N to M39012/03-0503 N type cable is a female to female coax assembly, PE3M0041-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to M39012/03-0503 type N jack cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 N type jack to M39012/03-0503 type N jack cable assembly PE3M0041-60 is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/03-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/03-0503 type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/03-0503 type N jack bulkhead to M39012/03-0503 N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/03-0503 N type cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to N female bulkhead cable 60 inch length using M17/84-RG223 coax.

1 : $383.99
25 : $364.79
50 : $345.59

PE3C7981-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.2-5, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 2.2-5 Male to 2.2-5 Female Bulkhead Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to 2.2-5 female bulkhead low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 male to 2.2-5 female bulkhead low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to 2.2-5 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a 2.2-5 bulkhead cable connection on the other. Our low PIM 2.2-5 to 2.2-5 cable assembly has a male gender on end 1 and a female on end 2. PE3C7981-60 can also be known as a low PIM 2.2-5 plug to 2.2-5 jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.665-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 2.2-5 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7981-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 2.2-5 male to bulkhead 2.2-5 female cable has a maximum VSWR of 1.4:1. 2.2-5 plug to 2.2-5 jack cable assembly PE3C7981-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7981-60 can also be used in the other direction and will be a 2.2-5 female bulkhead to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 2.2-5 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to 2.2-5 low PIM RF cable assembly as per your requirements.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE34501-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMC Plug to SMC Plug Cable 60 Inch Length Using PE-B100 Coax., Radio frequency assembly SMC plug to SMC plug cable 60 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug cable 60 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and SMC cable connection on the other. Our SMC to SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE34501-60, can also be known as a SMC male to SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE34501-60 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMC plug to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMC male to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug cable 60 inch length using PE-B100 coax.

1 : $92.99
25 : $88.34
50 : $83.69
100 : $79.97

PE3C10361-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated 7/16 DIN Male to N Male Low PIM Cable 60 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 7/16 DIN male to N male low PIM cable 60 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 7/16 DIN male to N male low PIM cable 60 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM a 7/16 DIN to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10361-60 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10361-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 7/16 DIN plug to type N plug cable assembly PE3C10361-60 is built with TCOM-400-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10361-60 can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements.

1 : $221.99
25 : $213.11
50 : $206.45
100 : $202.01

PE3160-72

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to SMA Female Cable 72 Inch Length Using PE-P195 Coax., Radio frequency assembly SMA male to SMA female cable 72 inch length using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 72 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3160-72, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3160-72 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3160-72 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 72 inch length using PE-P195 coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3181-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMB Plug Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to SMB plug cable 60 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMB plug cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE3181-60, can also be known as a SMA plug to SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3181-60 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3181-60 can also be used in the other direction and will be SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug cable 60 inch length using RG142 coax.

1 : $87.99
25 : $83.59
50 : $79.19
100 : $75.67

PE36160LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50. SMP Female to SMP Female Right Angle Cable Using PE-SR405FL Coax, RoHS. PE36160LF is a SMP female to SMP female right angle cable using PE-SR405FL coax. This Pasternack SMP female to SMP female right angle cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP to female SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE36160LF SMP female to SMP female right angle cable assembly is constructed with PE-SR405FL coax.

PE3C4481-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. SSMC Plug to SSMC Plug Right Angle Cable 60 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SSMC plug to SSMC plug right angle cable 60 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to SSMC plug right angle cable 60 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and right angle SSMC cable connection on the other. Our SSMC to right angle SSMC cable assemblies have a plug gender on end 1 and plug on end 2. This SSMC to SSMC cable is a plug to plug coax assembly, PE3C4481-60, can also be known as a SSMC male to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SSMC male to SSMC male cable assembly PE3C4481-60 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SSMC cable assembly is manufactured with SSMC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SSMC plug to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4481-60 can also be used in the other direction and will be right angle SSMC plug to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SSMC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to SSMC plug right angle cable 60 inch length using PE-SR405FLJ coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3C4931-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to N Male Cable 60 Inch Length Using LMR-100 Coax., Radio frequency assembly slide-on BMA plug bulkhead to N male cable 60 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to N male cable 60 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and N type cable connection on the other. Our BMA to type N cable assemblies have a plug gender on end 1 and male on end 2. This BMA to N type cable is a plug to male coax assembly, PE3C4931-60, can also be known as a BMA male to type N plug cable assembly and will be shipped same-day as it is purchased. BMA male to type N plug cable assembly PE3C4931-60 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BMA plug bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4931-60 can also be used in the other direction and will be N type male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to N male cable 60 inch length using LMR-100 coax.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE3C5291-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to N Female Low Loss Cable 60 Inch Length Using PE-P195 Coax., Radio frequency assembly BNC male to N female low loss cable 60 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to N female low loss cable 60 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss BNC to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C5291-60 can also be known as a low loss BNC plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5291-60 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our BNC male to type N female cable has a maximum VSWR of 1.4:1. BNC plug to type N jack cable assembly PE3C5291-60 is built with PE-P195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5291-60 can also be used in the other direction and will be a type N female to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3C6351-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 60 inches. Fire Rated 4.3-10 Female to N Male Low PIM Cable 60 Inch Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 female to N male low PIM cable 60 inch length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 female to N male low PIM cable 60 inch length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable is a female to male coax assembly, PE3C6351-60, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP N type plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly PE3C6351-60 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6351-60 can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 female to N male low PIM cable 60 inch length using SPF-250 coax using Times Microwave parts.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3W03160LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using RG402 Coax, LF Solder. PE3W03160LF is a SMA male right angle to SMA male right angle cable using RG402 coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03160LF SMA male right angle to SMA male right angle cable assembly is constructed with RG402 coax.

PE3W05160/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to 2.92mm Male Cable Using PE-SR405FL Coax with HeatShrink., Pasternack’s PE3W05160/HS BNC female bulkhead to 2.92mm male RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a 2.92mm cable connection on the other. Our BNC to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3W05160/HS can also be known as a BNC jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This PE3W05160/HS BNC jack to 2.92mm plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable BNC cable assembly is manufactured with BNC to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05160/HS can also be used in the other direction and will be a 2.92mm male to BNC female bulkhead cable assembly if the opposite connectivity is required. This BNC jack bulkhead to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to 2.92mm cable assembly for quick shipment worldwide. Variations of BNC and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to 2.92mm RF cable assembly as per your requirements.

PE3W16007

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. MHV Male to SHV Jack Cable Using LMR-195 Coax. PE3W16007 is a MHV male to SHV jack cable using LMR-195 coax. This Pasternack MHV male to SHV jack cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm SHV for connector 2. Our male MHV to jack SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16007 MHV male to SHV jack cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

TE Connectivity

9-160583-5

TE Connectivity

250 PIDG FASTON REC Quick Disconnect Terminal Type: Receptacle Insulation Option: Partially Insulated Wire Size: 22 – 16 AWG Wire Size: .3 – 1.5 mm² Wire Size: 592 – 3260 CMA Receptacle Partially Insulated 22 – 16 AWG .3 – 1.5 mm² | Quick Disconnect | Part Number: 9-160583-5 | Internal Number: 9-160583-5 | Alias Number: 514638-000 | TE Connectivity
RoHS : Compliant

5,000 : $0.9
2,500 : $0.92
1,000 : $0.94
500 : $0.96
250 : $0.99
100 : $1.01
50 : $1.03
25 : $1.05
10 : $1.07
1 : $1.1

5,438

8-34160-1

TE Connectivity

TERMINAL,PG R 16-14 8 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: M4 #8 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Ring Terminal | Part Number: 8-34160-1 | Internal Number: 8-34160-1 | Alias Number: AMPS-8-0034160-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.39
1,000 : $0.4
500 : $0.41
250 : $0.42
100 : $0.43
50 : $0.44
25 : $0.45
10 : $0.47
1 : $0.48

2,693

ROX8J160K

TE Connectivity

8W STD M/OX 5% 160K Resistance Value: 160K Ω Element Type: Metal Oxide Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Power Rating: 8 W Through-Hole Resistor | 160K Ω Metal Oxide Film General Purpose Resistor 5 % | Part Number: ROX8J160K | Internal Number: 9-2176415-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.98
500 : $2.04
250 : $2.1
100 : $2.16
50 : $2.22
25 : $2.28
10 : $2.34
1 : $2.4

1,468

AVH22MSSFE1A121604

TE Connectivity

AVH22 FLT SS MT R+P R&G 12V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22MSSFE1A121604 | Internal Number: 2-2364688-1 | TE Connectivity
RoHS : Compliant

50 : $54.7
25 : $57.92
10 : $61.14
1 : $64.35

AVH19LSFE3241604

TE Connectivity

AVH19 FLT SS LK RNG RED 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: On On 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With On On Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19LSFE3241604 | Internal Number: 2364570-8 | TE Connectivity
RoHS : Compliant

50 : $40.04
25 : $42.4
10 : $44.75
1 : $47.11

AVH22LSSFE7121604

TE Connectivity

AVH22 FLT SS LK RNG BLU 12V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22LSSFE7121604 | Internal Number: 1-2364686-8 | TE Connectivity
RoHS : Compliant

50 : $45.21
25 : $47.87
10 : $50.52
1 : $53.18

AVH22LSSFE6241604

TE Connectivity

AVH22 FLT SS LK RNG GRN 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22LSSFE6241604 | Internal Number: 1-2364686-6 | TE Connectivity
RoHS : Compliant

50 : $45.21
25 : $47.87
10 : $50.52
1 : $53.18

T1329160116-000

TE Connectivity

H16A-TG-PG16 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1329160116-000 | Internal Number: T1329160116-000 | TE Connectivity
RoHS : Compliant

25 : $17.86
10 : $19.24
1 : $20.61

BEDC106NN00001216000

TE Connectivity

923 RECEPTACLE, ANGLED, ROTATABLE Connector System: Cable-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 6 Circular Connector Shell Size: 23 Sealable: No Cable-to-Panel Circular Connector Receptacle 6 23 | Standard Circular Connector | Part Number: BEDC106NN00001216000 | Internal Number: BGC106N00001216000 | TE Connectivity
RoHS : Compliant

25 : $30.19
10 : $32.53
1 : $34.85

AVH22LSSFE1A241604

TE Connectivity

AVH22 FLT SS LK R+P R&G 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22LSSFE1A241604 | Internal Number: 2-2364688-4 | TE Connectivity
RoHS : Compliant

50 : $54.7
25 : $57.92
10 : $61.14
1 : $64.35

T1210160116-000

TE Connectivity

H16B-TS-PG16 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1210160116-000 | Internal Number: T1210160116-000 | TE Connectivity
RoHS : Compliant

25 : $17.1
10 : $18.41
1 : $19.73

AVH19LSFE13121604

TE Connectivity

AVH19 FLT SS LK R+P RED 12V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19LSFE13121604 | Internal Number: 2364572-6 | TE Connectivity
RoHS : Compliant

50 : $44.05
25 : $46.64
10 : $49.23
1 : $51.82

AVH19MSFE16121604

TE Connectivity

AVH19 FLT SS MT R+P GRN 12V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19MSFE16121604 | Internal Number: 1-2364572-3 | TE Connectivity
RoHS : Compliant

50 : $44.05
25 : $46.64
10 : $49.23
1 : $51.82

AVH19LSFP6241604

TE Connectivity

AVH19 FLT SS LK PWR GRN 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19LSFP6241604 | Internal Number: 1-2364574-6 | TE Connectivity
RoHS : Compliant

50 : $44.05
25 : $46.64
10 : $49.23
1 : $51.82

AVH19MSFO001604

TE Connectivity

AVH19 FLT SS MT NO LED 16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: Without Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch Without 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19MSFO001604 | Internal Number: 2364568-1 | TE Connectivity
RoHS : Compliant

50 : $33.73
25 : $35.71
10 : $37.7
1 : $39.68

Teledyne HiRel

5962-9160701M2A

Teledyne HiRel

SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH SYNCHRONOUS RESET AND COMMON I/O
RoHS : Not Compliant

5962-9091601BRA

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

5962-9160901MKA

Teledyne HiRel

PIPELINE REGISTER, 8-BIT DIAGNOSTIC, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9160301M2A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

M38510/31603B2A

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

5962-9091601M2A

Teledyne HiRel

MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant

5962-8751601DA

Teledyne HiRel

VOLT. COMPARATOR, DUAL DIFFERENTIAL
RoHS : Not Compliant

5962-9160701MSA

Teledyne HiRel

SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH SYNCHRONOUS RESET AND COMMON I/O
RoHS : Not Compliant

5962-9581601QXA

Teledyne HiRel

TRANSCEIVER/REGISTER, 16-BIT, WITH 3-STATE INPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9160401MEA

Teledyne HiRel

MULTIPLEXER, QUAD 2-INPUT, 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9221602MRA

Teledyne HiRel

SHIFT REGISTER, 8-BIT UNIVERSAL, TTL-COMPATIBLE WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9160401M2A

Teledyne HiRel

MULTIPLEXER, QUAD 2-INPUT, 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9221606MSA

Teledyne HiRel

SHIFT REGISTER, 8-BIT UNIVERSAL, TTL-COMPATIBLE WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/01601BCA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-9160601MLA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

C0402C0G160-101JNP

VENKEL LTD

Chip Capacitor;0402;C0G;16V;100pF;�5%
RoHS : Compliant

975,181

C0402C0G160-471JNP

VENKEL LTD

Chip Capacitor;0402;C0G;16V;470pF;�5%
RoHS : Compliant

337,216

C0402X5R160-104KNE

VENKEL LTD

Chip Capacitor;0402;X5R;16V;0.1uF;�10%
RoHS : Compliant

160,000

C0402X7R160-123KNP

VENKEL LTD

Chip Capacitor;0402;X7R;16V;0.012uF;�10%
RoHS : Compliant

44,000

C0603X7R160-224JNP

VENKEL LTD

Chip Capacitor;0603;X7R;16V;0.22uF;�5%
RoHS : Compliant

24,000

C0603X7R160-224KNE

VENKEL LTD

Chip Capacitor;0603;X7R;16V;0.22uF;�10%
RoHS : Compliant

11,200

C01005C0G160-3R9BNP

VENKEL LTD

Chip Capacitor;01005;C0G;16V;3.9pF;�0.1pF
RoHS : Compliant

C01005C0G160-3R9CNE

VENKEL LTD

Chip Capacitor;01005;C0G;16V;3.9pF;�0.25pF
RoHS : Compliant

C01005HQN160-0R4ANP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;0.4pF;�0.05pF
RoHS : Compliant

C01005HQN160-1R1CNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;1.1pF;�0.25pF
RoHS : Compliant

C01005HQN160-3R0BNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;3pF;�0.1pF
RoHS : Compliant

C01005HQN160-8R2CNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;8.2pF;�0.25pF
RoHS : Compliant

C0201X6S160-104KNP

VENKEL LTD

Chip Capacitor;0201;X6S;16V;0.1uF;�10%
RoHS : Compliant

C0603HQN101-160JNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;100V;16pF;�5%
RoHS : Compliant

C0603X7R160-151KNP

VENKEL LTD

Chip Capacitor;0603;X7R;16V;150pF;�10%
RoHS : Compliant

Waytek, Inc.

19160-0040

Molex

Twist Lock Wire Connector Blue 22 To 14 GA
RoHS : Compliant

100 : $0.0225
200 : $0.021
500 : $0.0196
1,000 : $0.0181
5,000 : $0.0171

146,425

19160-0039

Molex

Twist Lock Wire Connector Gray 22 To 16 GA
RoHS : Compliant

100 : $0.0184
200 : $0.0172
500 : $0.016
1,000 : $0.0147
5,000 : $0.0139

69,686

19016-0009

Molex

22-18 GA Female Disconnect Non-Insulated .250 x .032
RoHS : Compliant

100 : $0.054
200 : $0.0531
500 : $0.0511
1,000 : $0.0486
5,000 : $0.0469

15,119

160-021

AFC Cable Systems Inc

Non-Metallic Electrical Tubing Black 3/4" 100 FT UL LIQUID TIGHT

100 : $1.3901
500 : $1.3132

5,000

160-012

AFC Cable Systems Inc

Non-Metallic Electrical Tubing Black 3/8" 100 FT UL LIQUID TIGHT

100 : $0.9533
500 : $0.9005

1,700

AHDP-16-04477

Amphenol Sine Systems

AHDP Series Rubber Flange Seal Sheel Size 24

5 : $0.9215
10 : $0.8715
50 : $0.8315
100 : $0.7815
200 : $0.7415
500 : $0.7115

173

31-602

Pollak

Pollak 31-602 2-position ignition lock switch is a keyed ignition switch for vehicle electrical control. It provides two-position operation in a panel-mounted lock-switch format, giving compact ignition circuit control where a locking key actuator is required.

1 : $23.25
10 : $20.85
50 : $19.18
100 : $18.55
200 : $18.04
500 : $16.68

C01600U00001012

Amphenol Sine Systems

Amphenol Sine Systems C01600U00001012 protective cap is a plastic connector cover for ecomate male cable plugs. Designed for shell size 2 connectors, it helps protect unmated plug interfaces from dust and handling damage in industrial cable assemblies.

1 : $9.72
5 : $9.08
10 : $8.15
50 : $7.68
100 : $7.03
200 : $6.61

2016066163

Molex

High Current Universal Clamp Terminal Block, 6-1/0GA, 35mm DIN-rail MT, 600V, 3 Pole,150A
RoHS : Compliant

1 : $18.03
10 : $16.2
50 : $14.94
100 : $13.54
200 : $12.56
500 : $11.65

31-601

Pollak

Pollak 31-601 3-position ignition switch is a keyed panel-mount switch for vehicle ignition control. Its 3-position design supports compact Off, ignition, and start-style circuit operation for automotive, truck, and equipment electrical systems.

1 : $28.73
10 : $24.46
50 : $22.32
100 : $21.52
200 : $20.86
500 : $20.32

64016-0041

Molex

22-10GA Perma-Seal Crimp Tool Molex 64016-0041

1 : $75.15
10 : $70.68

640160204

Molex

Molex Ratchet Hand Tool MLX 640160204 REPLACED 427 TYCO 90546-1
RoHS : Compliant

1 : $200.94
10 : $188.46

16023A

Eaton Electronics

Sure Power 16023A Mult Battery Isolator 160A 1 INP 2 Battery

1 : $161.47
5 : $154.74
10 : $148.97
25 : $140.32

624 1604 3 01 RT

Rennsteig Tools Inc

HES 2.4 (SIZE 12) Regular Wall Crimp Die Tool Delphi 13926169 USE WITH PN 385

1 : $393.88
10 : $369.57

221016-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 221016-0002 LED 12V, 30 Watts &50,000 hrs lamp life

1 : $386.54
5 : $365.78
10 : $353.31
50 : $336.68
100 : $320.05

Win Source Electronics

C3216X5R1V226M160AC

TDK Corporation

CAP CER 22UF 35V X5R 1206
RoHS : Compliant

1,270 : $0.2364
950 : $0.2637
735 : $0.2728
535 : $0.2819
345 : $0.291
145 : $0.3546

283,955

AVRM1608C390KT271N

TDK Corporation

VARISTOR 39V 78A 0603
RoHS : Compliant

1,535 : $0.1955
1,150 : $0.2181
890 : $0.2256
645 : $0.2331
420 : $0.2407
175 : $0.2933

120,000

C1608X7R1H474KT000E

TDK Corporation

CAP CER 0.47UF 50V X7R 0603
RoHS : Compliant

6,090 : $0.0493
4,550 : $0.055
3,515 : $0.0569
2,555 : $0.0588
1,650 : $0.0607
680 : $0.0739

64,000

MBKK1608T2R2M

TAIYO YUDEN

FIXED IND 2.2UH 750MA 345MOHM SM
RoHS : Compliant

4,910 : $0.0611
3,670 : $0.0682
2,840 : $0.0705
2,060 : $0.0729
1,330 : $0.0752
550 : $0.0916

60,000

BSC160N15NS5

Infineon Technologies AG

N-Channel 150V 56A 96W Surface Mount TDSON-8(5x6)
RoHS : Compliant

460 : $0.6523
370 : $0.6788
285 : $0.7054
200 : $0.7584
130 : $0.7849
60 : $0.8379

55,000

ATTINY1604-SSN

Microchip Technology Inc

IC MCU 8BIT 16KB FLASH 14SOIC
RoHS : Compliant

355 : $0.8475
265 : $0.9452
205 : $0.9778
150 : $1.0104
100 : $1.043
40 : $1.2712

15,000

DEA160915LT-1169A4

TDK Corporation

510 : $0.591
380 : $0.6591
295 : $0.6819
215 : $0.7046
140 : $0.7273
60 : $0.8864

14,430

LMR16006YQ3DDCRQ1/LMR16006YQ3DDCTQ1

Texas Instruments

109 : $2.7745
87 : $2.8873
67 : $3.0
47 : $3.2256
30 : $3.3384
15 : $3.564

10,390

BQ20Z75DBTR-V160

Texas Instruments

IC GAS GAUGE W/TRACK IMP 38TSSOP
RoHS : Compliant

13 : $26.0776
10 : $29.0865
8 : $30.0896
6 : $31.0925
4 : $32.0955
2 : $39.1163

3,000

IS42S32160F-6BLI

Integrated Silicon Solution Inc

IC DRAM 512MBIT PARALLEL 90TFBGA / SDRAM Memory IC 512Mb (16M x 32) Parallel 167 MHz 5.4 ns 90-TFBGA (8x13)
RoHS : Compliant

10 : $31.5152
8 : $35.1516
6 : $36.3637
4 : $37.5758
3 : $38.7879
2 : $47.2728

2,500

LM5160DNTR/LM5160DNTJ

Texas Instruments

125 : $2.4046
100 : $2.5023
77 : $2.6
54 : $2.7955
35 : $2.8933
17 : $3.0888

1,890

LM5160DNTR/LM5160DNTT

Texas Instruments

125 : $2.4046
100 : $2.5023
77 : $2.6
54 : $2.7955
35 : $2.8933
17 : $3.0888

1,810

LM5160DNTT

Texas Instruments

IC REG BCK FLYBCK ISO ADJ 12WSON / Conv DC-DC 4.5V to 65V Synchronous Step Down Single-Out 2V to 60V 1.5A Automotive 12-Pin WSON EP T/R
RoHS : Compliant

125 : $2.4028
94 : $2.6801
73 : $2.7725
53 : $2.8649
34 : $2.9573
14 : $3.6042

1,350

IS42S16160J-6BL-TR