 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
1206HHA-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 ComSIT USA | RC1206FR078K06 | yag | Resistor RoHS : Compliant | 44,323 | ||
| RT1206FRE07100RL | YAGEO Corporation | THIN FILM CHIP RESISTOR Fixed Resistor, Thin Film, 0.25W, 100ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 25,000 | |||
C1206X472JBGACAUTO%20Kemet.jpg) | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 630V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.0047uF, Surface Mount, 1206 RoHS : Compliant | 22,500 | |||
| RC1206FR07160K | YAGEO Corporation | GENERAL PURPOSE SURFACE MOUNT CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 160000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 20,000 | |||
| CRCW120622K0FKEA | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 22000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 20,000 | |||
| RC1206FR106K04L | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 6040ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| RC1206JR076K2L | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 6200ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| AC1206JR0762RL | YAGEO Corporation | THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 62ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| VJ1206A471JXEBM31 | Vishay Intertechnologies | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 500V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00047uF, Surface Mount, 1206 RoHS : Compliant | 9,970 | |||
| VJ1206A181JXBCW1BC | Vishay Intertechnologies | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 100V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00018uF, Surface Mount, 1206 RoHS : Compliant | 8,000 | |||
C1206C224K5RAC | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.22uF, Surface Mount, 1206 RoHS : Compliant | 8,000 | |||
| RC1206FR0751KL | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 51000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| AC1206FR07120RL | YAGEO Corporation | THICK FILM RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 120ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| CRCW120618K0JNEA | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 18000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| SD1206S040S2R0 | Kyocera AVX Components | SCHOTTKY BARRIER RECTIFIER DIODE Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 40V V(RRM), Silicon RoHS : Compliant | 3,000 | |||
 PUI | BLU1206-1002-DT10W | RCD Components Inc | RoHS : Compliant | 70,000 | ||
| BLU1206-1003-DT10W | RCD Components Inc | RoHS : Compliant | 60,000 | |||
| BLU1206-3012-DT10W | RCD Components Inc | RoHS : Compliant | 20,000 | |||
| BLU1206-8452-DT10W | RCD Components Inc | RoHS : Compliant | 20,000 | |||
| MC1206-3482-FTW | RCD Components Inc | RoHS : Compliant | 10,000 | |||
| BLU1206-1103-DT10W | RCD Components Inc | RoHS : Compliant | 10,000 | |||
| BLU1206-4991-DT10W | RCD Components Inc | RoHS : Compliant | 10,000 | |||
| C1206N681K050TX | HolyStone International | RoHS : Compliant | 6,000 | |||
| BLU1206-4992-DT10W | RCD Components Inc | RoHS : Compliant | 5,000 | |||
| BLU1206-6982-DT10W | RCD Components Inc | RoHS : Compliant | 5,000 | |||
| C1206N561J050TX | HolyStone International | RoHS : Compliant | 3,000 | |||
| R1206-005-R | 3,000 | |||||
| 1206DFR-3-.047-1-5/CR | EFC Wesco | RoHS : Compliant | 3,000 | |||
| BLR-1206-G | 861 | |||||
| 3112-06G00SBA | Oupiin | RoHS : Compliant | 454 | |||
 Chip 1 Exchange | RC1206FR-07150RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 350,708 | ||
| RC1206FR | YAGEO Corporation | INSTOCK | 11,447 | |||
| C1206C102K1RACTU | KEMET Corporation | INSTOCK RoHS : Compliant | 8,887 | |||
| C1206C102K1RACTU | INSTOCK | 5,000 | ||||
| RC1206JR-0727KL | YAGEO Corporation | INSTOCK RoHS : Compliant | 4,880 | |||
| RC1206FR-07150RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 4,750 | |||
| RC1206FR-07200R | INSTOCK | 4,573 | ||||
| RC02H 1206 2K7 | YAGEO Corporation | INSTOCK | 4,500 | |||
| VJ1206Y822KXBAT | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 3,000 | |||
| 9C12063A1502FKHFT | YAGEO Corporation | INSTOCK RoHS : Compliant | 1,146 | |||
| RC1206FR-07 4K12 | Vishay Vitramon | INSTOCK | 1,000 | |||
| RC1206JR-0775RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 400 | |||
| RC1206JR-071R1L | YAGEO Corporation | INSTOCK RoHS : Compliant | 341 | |||
| RC1206FR-073K | YAGEO Corporation | INSTOCK RoHS : Compliant | 226 | |||
| 1206 | INSTOCK | 84 | ||||
 Braemac Americas-Symmetry | ATL-1Z120612SR10LT | Abracon Corporation | RoHS : Compliant |
| 0 | |
AIML-1206-1R0K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIML-1206-5R6K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIML-1206-R27K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-33NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-R27J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-101-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATL-1Z120612SR15LT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIML-1206-1R5K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIML-1206-R068M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIML-1206-270K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-15NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-1R2J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-82NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIML-1206-100K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Chip-Germany GmbH | C1206C333KCRACAUTO | KEMET Corporation | RoHS : Compliant | 14,390 | ||
| CRCW12061K21FKEAHP | Vishay Intertechnologies | RoHS : Compliant | 10,870 | |||
| SMD COMMON MODE CHOKE 1206 USB2.0 | Wurth Elektronik | 1,450 | ||||
12061A122JAT2A | Kyocera AVX Components | RoHS : Compliant | 98 | |||
| CRCW120668K1FKEA | Vishay Intertechnologies | RoHS : Compliant | 93 | |||
| CRCW1206147FRT1 | Vishay Intertechnologies | 86 | ||||
| CRCW120646K4EKE | Vishay Intertechnologies | 54 | ||||
| RL1206FR070R82L | YAGEO Corporation | 45 | ||||
| CRCW1206300KFKEA | Vishay Intertechnologies | RoHS : Compliant | 20 | |||
| MC0125W1206 | SPC Multicomp | 20 | ||||
| 2512061217Y5 | Fair-Rite Products Corp | RoHS : Compliant | 11 | |||
| 12066C226KAT2A | Kyocera AVX Components | RoHS : Compliant | 10 | |||
| CRCW12067K50JNEA | Vishay Intertechnologies | RoHS : Compliant | 9 | |||
| C1206C562J5GACTU | KEMET Corporation | RoHS : Compliant | 8 | |||
| 12061C102KAT2A | Kyocera AVX Components | RoHS : Compliant | 6 | |||
 Component Electronics, Inc | RC1206F1821 | Synton-Tech Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 10,000 | |
| RC1206FR-07237R | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,800 | ||
| CR1206-1206JVCA | Bourns Inc | IN STOCK SHIP TODAY |
| 5,000 | ||
| RC1206FR-07237R | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant | 5,000 | |||
| RC1206FR-072K61 | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,800 | ||
| RC1206FR-0768RL | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,800 | ||
| RC1206JR-071M6L | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,800 | ||
| 9C12063A5621FKRFT | YAGEO Corporation | IN STOCK SHIP TODAY |
| 4,700 | ||
| 9C12063A5621FKRFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 2,000 | ||
| RC1206FR-07200R | IN STOCK SHIP TODAY |
| 1,000 | |||
| PFC-W1206R-03-2082-B-1059 | TT Electronics Resistors | IN STOCK SHIP TODAY |
| 850 | ||
| 10-11-2063 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 510 | ||
| 9C12063A3304FKHFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 300 | ||
| 9C12063A39R2FKHFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 260 | ||
| 9C12063A5600JLHFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 190 | ||
 DB Roberts | 47-81-206-55 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | ||
| RT-120-60-60 | Essentra Components | 0 | ||||
| ASPS-12-062 | Essentra Components | 0 | ||||
| 0120650000VR | Essentra Components | 0 | ||||
| 74200-12061 | Avdel | CIRCLIP | 0 | |||
| 2120-632-S | RAF Electronic Hardware | 0 | ||||
| 2120-632-S-12 | RAF Electronic Hardware | 0 | ||||
| 8120-632-A | RAF Electronic Hardware | 0 | ||||
| 47-11-206-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| FLEX5-12063 | SHEREX FASTENING SO | 0 | ||||
| ASPR-12-062 | Essentra Components | BUMPER,ADH MNT,RND,BLACK,.75 I | 0 | |||
| 16FW312062B | Essentra Components | FLAT WASHER, .317 ID, .500 OD, | 0 | |||
| 16FWRT312062B | Essentra Components | 0 | ||||
| 2120-632-A | RAF Electronic Hardware | 0 | ||||
| FLEX5-12061 | SHEREX FASTENING SO | 0 | ||||
 EBV Elektronik | CA12064_EMILY-M | LEDIL | LENS ROUND 1 POS 26MM OD 15MM H (Alt: CA12064_EMILY-M) RoHS : Compliant | 72,410 | ||
CAP1206-1-SL-TR | Microchip Technology Inc | (Alt: CAP1206-1-SL-TR) RoHS : Compliant | 2,600 | |||
| IL1206AT | Vishay Intertechnologies | (Alt: IL1206AT) RoHS : Compliant | 0 | |||
| JAN1N1206A | Microchip Technology Inc | (Alt: JAN1N1206A) RoHS : Not Compliant | 0 | |||
| CAP1206-1-SL | Microchip Technology Inc | 6CHANNEL CAPACITIVE TOUCH SENSOR (Alt: CAP1206-1-SL) RoHS : Compliant | 0 | |||
| STPSC12065DY | STMicroelectronics | (Alt: STPSC12065DY) RoHS : Compliant | 0 | |||
| TSCDF12065G1 | Taiwan Semiconductor | (Alt: TSCDF12065G1) RoHS : Compliant | 0 | |||
| APT12060LVFRG | Microchip Technology Inc | (Alt: APT12060LVFRG) RoHS : Compliant | 0 | |||
| HCPL-2212-060E | Broadcom Limited | Optocoupler LogicOut TotemPole DCIN 1CH 8Pin PDIP Tube (Alt: HCPL-2212-060E) RoHS : Compliant | 0 | |||
| ACPL-K312-060E | Broadcom Limited | Optocoupler LogicOut PushPull DCIN 1CH 8Pin SO Stretched Tube (Alt: ACPL-K312-060E) RoHS : Compliant | 0 | |||
| VS-E5TW1206FP-N3 | Vishay Intertechnologies | (Alt: VS-E5TW1206FP-N3) RoHS : Compliant | 0 | |||
| R1206N071B-TR-FE | Nisshinbo Micro Devices | Switching Voltage Regulators Boost DCDC Converter (Alt: R1206N071B-TR-FE) RoHS : Compliant | 0 | |||
| STPSC12065G2Y-TR | STMicroelectronics | (Alt: STPSC12065G2Y-TR) RoHS : Compliant | 0 | |||
CAP1206-1-AIA-TR | Microchip Technology Inc | Capacitive Touch Sensor 10Pin DFN TR (Alt: CAP1206-1-AIA-TR) RoHS : Compliant | 0 | |||
| W1206-601817/BCM957608-P1400GQF00 | Broadcom Limited | P1400G Thor 2 GA PCIe QSFP 00 Network interface card (Alt: W1206-601817/BCM957608-P1400GQF00) RoHS : Compliant | 0 | |||
 ECCO | 1-206062-6 | TE Connectivity | RoHS : Compliant |
| 24 | |
 Flip Electronics | R5F12068MSP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 27,548 | ||
| R5F12067GSP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 12,165 | |||
| R5F12068GSP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 12,017 | |||
| R5F12067ASP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 10,192 | |||
| R5F12067MSP#30 | Renesas Electronics Corporation | Stock RoHS : Compliant | 6,933 | |||
| DSEI12-06A | Littelfuse Inc | Stock RoHS : Compliant | 5,450 | |||
| ACPL-K312-060E | Broadcom Limited | Stock, Ship Today RoHS : Compliant |
| 1,440 | ||
| DSEI12-06AS-TUB | Littelfuse Inc | Stock RoHS : Compliant | 550 | |||
| R5F12068ASM#9F | Renesas Electronics Corporation | Stock | 76 | |||
 Maritex | RC1206JR-07100RL | YAGEO Corporation | Chip Resistor; SMD; 1206; 100R; 5%; 1/4W RoHS : Compliant |
| 132,192 | |
| RC1206JR-0712KL | YAGEO Corporation | Chip Resistor; SMD; 1206; 12K; 5%; 1/4W RoHS : Compliant |
| 34,400 | ||
| RC1206JR-07270RL | YAGEO Corporation | Chip Resistor; SMD; 1206; 270R; 5%; 1/4W RoHS : Compliant |
| 16,089 | ||
| RC1206FR-07270RL | YAGEO Corporation | Chip Resistor; SMD; 1206; 270R; 1%; 1/4W RoHS : Compliant |
| 14,720 | ||
| RC1206JR-0775RL | YAGEO Corporation | Chip Resistor; SMD; 1206; 75R; 5%; 1/4W RoHS : Compliant |
| 10,600 | ||
| RC1206FR-072K2L | YAGEO Corporation | Chip Resistor; SMD; 1206; 2K2; 1%; 1/4W RoHS : Compliant |
| 10,365 | ||
| RMC 1206 1/4W, , T/R, 620K | Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 1206; 620K; 5%; 1/4W |
| 9,380 | ||
| CRCW120618R0FKTABC | Vishay Intertechnologies | Resistor; thick film; SMD; 1206; 18Ohm; 1%; 0.25W; -55+125 deg.C RoHS : Compliant |
| 7,740 | ||
| RMC 1206 1/4W, , T/R, 9M1 | RDA Microelectronics | Chip Resistor; SMD; 1206; 9M1; 5%; 1/4W |
| 6,761 | ||
| RC1206FR-07634KL | YAGEO Corporation | Resistor; Thick Film; 1206; 634K; 1%; 1/4W RoHS : Compliant |
| 5,000 | ||
| RC1206JR-071K1L | YAGEO Corporation | Chip Resistor; SMD; 1206; 1K; 1; 5%; 1/4W RoHS : Compliant |
| 4,000 | ||
| RC1206FR-0722KL | YAGEO Corporation | Chip Resistor; SMD; 1206; 22K; 1%; 1/4W RoHS : Compliant |
| 2,390 | ||
| RC1206FR-07220KL | YAGEO Corporation | Chip Resistor; SMD; 1206; 220K; 1%; 1/4W RoHS : Compliant |
| 215 | ||
| RC1206FR-073K32L | YAGEO Corporation | Chip Resistor; SMD; 1206; 3K32; 1%; 1/4W RoHS : Compliant |
| 13 | ||
| C1206C102M5RACTU | KEMET Corporation | Ceramic Capacitors; C1206C102M5RACTU; KEMET; 1 nF; 1206; 50 V; 50 V RoHS : Compliant |
| 4 | ||
 Pasternack Enterprises US | PE7AP412-06 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.4:1, Attenuation: 6 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 6 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 0.5 Watts Up to 40 GHz. PE7AP412-06 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP412-06 6 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 0.5 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP412-06 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 22 | |
| PE3W11206 | Pasternack Enterprises | Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W12061 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. 10-32 Female to BNC Female Cable Using RG196 Coax. PE3W12061 is a 10-32 female to BNC female cable using RG196 coax. This Pasternack 10-32 female to BNC female cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm BNC for connector 2. Our female 10-32 to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12061 10-32 female to BNC female cable assembly is constructed with RG196 coax. | 0 | |||
| PE3C11206 | Pasternack Enterprises | 0 | ||||
| PE3W01206 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to MCX Jack Cable Using LMR-100 Coax. PE3W01206 is a SMA male to MCX jack cable using LMR-100A coax. This Pasternack SMA male to MCX jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our male SMA to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01206 SMA male to MCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01206/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MCX Jack to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-200CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-200CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12067LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Male Cable Using SPF-250 Coax, LF Solder. PE3W12067LF is a 4.1/9.5 Mini DIN male to 4.1/9.5 Mini DIN male cable using SPF-250 coax. This Pasternack 4.1/9.5 Mini DIN male to 4.1/9.5 Mini DIN male cable assembly uses a 50 Ohm 4.1/9.5 Mini DIN for connector 1 and a 50 Ohm 4.1/9.5 Mini DIN for connector 2. Our male 4.1/9.5 Mini DIN to male 4.1/9.5 Mini DIN cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W12067LF 4.1/9.5 Mini DIN male to 4.1/9.5 Mini DIN male cable assembly is constructed with SPF-250 coax. | 0 | |||
| PE37120-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to Reverse Polarity TNC Male Cable 60 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to reverse polarity TNC male cable 60 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to reverse polarity TNC male cable 60 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE37120-60, can also be known as a low loss SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE37120-60 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37120-60 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 60 inch length using PE-C195 coax. |
| 0 | ||
| PE3W12066 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. BNC Female to BNC Female Cable Using PE-SR402AL Coax. PE3W12066 is a BNC female to BNC female cable using PE-SR402AL coax. This Pasternack BNC female to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC to female BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12066 BNC female to BNC female cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3W01206/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to SMA Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W12062 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Right Angle Cable Using LMR-200-FR Coax. PE3W12062 is a TNC male right angle to SMA male right angle cable using LMR-200-FR coax. This Pasternack TNC male right angle to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12062 TNC male right angle to SMA male right angle cable assembly is constructed with LMR-200-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W12069 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 2.92mm Male to 1.85mm Male Cable Using Tinned RG405 Coax. PE3W12069 is a 2.92mm male to 1.85mm male cable using RG405 Tinned coax. This Pasternack 2.92mm male to 1.85mm male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our male 2.92mm to male 1.85mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12069 2.92mm male to 1.85mm male cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3C1206 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using PE-P195 Coax. PE3C1206 is a 7/16 DIN male to 7/16 DIN male cable using PE-P195 coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1206 7/16 DIN male to 7/16 DIN male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W01206/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MCX Jack to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-48 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-48 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12065 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to MHV Male Cable Using RG393 Coax. PE3W12065 is a 7/16 DIN male to MHV male cable using RG393 coax. This Pasternack 7/16 DIN male to MHV male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm MHV for connector 2. Our male 7/16 DIN to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12065 7/16 DIN male to MHV male cable assembly is constructed with RG393 coax. | 0 | |||
 TE Connectivity | CRGCQ1206F47K | TE Connectivity | CRGCQ 1206 47K 1% Resistance Value: 47K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 47K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ1206F47K | Internal Number: 4-2176343-5 | TE Connectivity RoHS : Compliant |
| 154,909 | |
| CRGCQ1206F82R | TE Connectivity | CRGCQ 1206 82R 1% Resistance Value: 82 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 82 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ1206F82R | Internal Number: 1-2176343-2 | TE Connectivity RoHS : Compliant |
| 140,504 | ||
| CRGCQ1206F8K2 | TE Connectivity | CRGCQ 1206 8K2 1% Resistance Value: 8.2K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 8.2K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ1206F8K2 | Internal Number: 3-2176343-6 | TE Connectivity RoHS : Compliant |
| 49,210 | ||
| CRGP1206F680K | TE Connectivity | CRGP 1206 680K 1% Resistance Value: 680K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 680K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGP1206F680K | Internal Number: 5-2176328-9 | TE Connectivity RoHS : Compliant |
| 37,930 | ||
| CRGCQ1206J15K | TE Connectivity | CRGCQ 1206 15K 5% Resistance Value: 15K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 1206 Surface Mount Resistor | 15K Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGCQ1206J15K | Internal Number: 2-2176344-6 | TE Connectivity RoHS : Compliant |
| 26,306 | ||
| CRGCQ1206F180R | TE Connectivity | CRGCQ 1206 180R 1% Resistance Value: 180 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 180 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ1206F180R | Internal Number: 1-2176343-6 | TE Connectivity RoHS : Compliant |
| 24,316 | ||
| CRGP1206F22K | TE Connectivity | CRGP 1206 22K 1% Resistance Value: 22K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 22K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGP1206F22K | Internal Number: 4-2176328-1 | TE Connectivity RoHS : Compliant |
| 11,555 | ||
| CRGCQ1206F82K | TE Connectivity | CRGCQ 1206 82K 1% Resistance Value: 82K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 82K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ1206F82K | Internal Number: 4-2176343-8 | TE Connectivity RoHS : Compliant |
| 9,029 | ||
| CRGCQ1206F12R | TE Connectivity | CRGCQ 1206 12R 1% Resistance Value: 12 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 12 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ1206F12R | Internal Number: 2176343-2 | TE Connectivity RoHS : Compliant |
| 4,016 | ||
| CRGCQ1206F270R | TE Connectivity | CRGCQ 1206 270R 1% Resistance Value: 270 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 270 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ1206F270R | Internal Number: 1-2176343-8 | TE Connectivity RoHS : Compliant |
| 3,949 | ||
| CRGCQ1206J1R5 | TE Connectivity | CRGCQ 1206 1R5 5% Resistance Value: 1.5 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 1206 Surface Mount Resistor | 1.5 Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGCQ1206J1R5 | Internal Number: 2176344-2 | TE Connectivity RoHS : Compliant |
| 3,633 | ||
| 5120603-1 | TE Connectivity | 1FHR,64,30A/S,S,N,S11,12 PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 64 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5120603-1 | Internal Number: 5120603-1 | TE Connectivity RoHS : Compliant |
| 3,233 | ||
| CRGP1206F2K2 | TE Connectivity | CRGP 1206 2K2 1% Resistance Value: 2.2K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1206 Surface Mount Resistor | 2.2K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGP1206F2K2 | Internal Number: 2-2176328-9 | TE Connectivity RoHS : Compliant |
| 1,583 | ||
| 3-641120-6 | TE Connectivity | 06P MTA156 HDR ASSY FL/ST LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 3-641120-6 | Internal Number: 3-641120-6 | TE Connectivity RoHS : Compliant |
| 18 | ||
| TXR54AB00-1206AI | TE Connectivity | TXR54AB00-1206AI Connector Backshell Product Style: Ruggedized Connector Backshell Product Type: Backshell Cable Entry Diameter: .01 – .38 in Cable Entry Diameter: .2 – 9.5 mm Primary Product Material: Aluminum Ruggedized Backshell .01 – .38" .2 – 9.5 mm | Connector Backshell | Part Number: TXR54AB00-1206AI | Internal Number: 150211-000 | Alias Number: 2-1191086-1 | Aluminum | TE Connectivity RoHS : Compliant |
| 2 | ||
 Venkel Ltd. | PWCR1206-UK-1024FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;1.02M;�1% RoHS : Compliant | 0 | ||
| PWCR1206-UK-1053DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;105K;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-106JT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;10M;�5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1105FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;11M;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1134DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;1.13M;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1150FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;115R;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1215DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;12.1M;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1475FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;14.7M;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1503DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;150K;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-151JT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;150R;�5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1585DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;15.8M;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1600FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;160R;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1873DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;187K;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-2151DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;2.15K;�0.5% RoHS : Compliant | 0 | |||
| PWCR1206-UK-2203FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;220K;�1% RoHS : Compliant | 0 | |||
 Win Source Electronics | 1206L012WR | Littelfuse Inc | PTC RESET 30V .125A SMD 1206 RoHS : Compliant |
| 213,036 | |
| RC1206FR-07150KL | YAGEO Corporation | RES SMD 150K OHM 1% 1/4W 1206 RoHS : Compliant |
| 139,000 | ||
CC1206JKNPOCBN102 | YAGEO Corporation | CAP CER 1000PF 1KV C0G/NPO 1206 / 1000 pF ±5% 1000V (1kV) Ceramic Capacitor C0G, NP0 1206 (3216 Metric) RoHS : Compliant |
| 127,740 | ||
| FSMD020-1206-R | Fuzetec Technology Co Ltd | RESETTABLE FUSE - SMD, 1206 SIZE RoHS : Compliant |
| 100,000 | ||
| HI1206T500R-10 | Qnity Laird | FERRITE BEAD 50 OHM 1206 1LN RoHS : Compliant |
| 92,000 | ||
| WSL1206R0500FEA | Vishay Huntington | RES SMD 0.05 OHM 1% 1/4W 1206 |
| 67,100 | ||
| AC1206FR-071KL | YAGEO Corporation | RES SMD 1K OHM 1% 1/4W 1206 RoHS : Compliant |
| 65,000 | ||
| RC1206JR-07100RL | YAGEO Corporation | RES SMD 100 OHM 5% 1/4W 1206 RoHS : Compliant |
| 55,000 | ||
| CC1206KKX5R8BB106 | YAGEO Corporation | CAP CER 10UF 25V X5R 1206 RoHS : Compliant |
| 53,500 | ||
| RC1206FR-07150RL | YAGEO Corporation | RES SMD 150 OHM 1% 1/4W 1206 RoHS : Compliant |
| 50,000 | ||
| RC1206FR-076K8L | YAGEO Corporation | RES 6.8K OHM 1% 1/4W 1206 / 6.8 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film RoHS : Compliant |
| 17,220 | ||
| 1206L400SLWR | Littelfuse Inc | PTC RESET FUSE 6V 4A 1206 RoHS : Compliant |
| 13,720 | ||
| 1206N221J102CT | Walsin Technology Corporation | MLCC 220PF 1000V NPO 1206 / 220 pF ±5% 1000V (1kV) Ceramic Capacitor C0G, NP0 1206 (3216 Metric) RoHS : Compliant |
| 12,513 | ||
| 1206L200SLYR | Littelfuse Inc | PTC RESETTABLE 6V 2A 1206 RoHS : Compliant |
| 8,000 | ||
| RT1206BRD07200KL | YAGEO Corporation | RES SMD 200K OHM 0.1% 1/4W 1206 RoHS : Compliant |
| 555 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Spanish ▼ 
English
Chinese
German
Japanese
Russian
Korean
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand