1206C-R33 Price, Reseller, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Right Angle with Times Connectors Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N male right angle with times connectors cable 60 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle with times connectors cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C0120-60, can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0120-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0120-60 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle with times connectors cable 60 inch length using LMR-195 coax.

1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81

254

PE3M0120-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 60 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 60 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 60 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3029 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3029 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0120-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3029 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3029 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0120-60 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/55-3029 SMA cable assembly is manufactured with M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3029 SMA male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0120-60 can also be used in the other direction and will be right angle M39012/56-3129 SMA male to M39012/55-3029 SMA male cable assembly if the opposite connectivity is required. M39012/55-3029 SMA plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3029 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 60 inch length using M17/28-RG58 coax.

1 : $421.99
25 : $400.89
50 : $379.79

PE51206

Pasternack Enterprises

Key Specifications, Antenna Type: PCB, Minimum Frequency: 2.4 GHz, Maximum Frequency: 2.5 GHz, Connector 1 Polarity: Standard, Connector Series: UMCX, Connector Gender: Plug, Impedance: 50 Ohm, Maximum Input VSWR: 2:1.

1 : $3.48
25 : $3.34
50 : $3.24
100 : $3.17

PE20DV1206

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 1 MHz, Maximum Frequency: 500 MHz, Number of Output Ports: 3 Port, Impedance: 50 Ohm, Maximum Input Power: 10 Watt. 3 way N Power Divider from 1 MHz to 500 MHz Rated at 10 Watts., The PE20DV1206 3-way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 1 MHz and a maximum frequency of 500 MHz. This Pasternack 3 port power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 10 Watts. Our type N coaxial RF splitter / divider has a female type N input and 3 female type N output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Pasternack’s PE20DV1206 power splitter comes with an aluminum housing and can handle maximum reverse power up to 1 Watts. This type N connector power divider has a 0.40 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 3-way type N RF power divider from Pasternack has a maximum insertion loss of 1.2 dB. The maximum input VSWR of this type N splitter / divider is 1.4:1 and the minimum isolation is 20 dB. Our 3 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 3-way type N female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF power divider for your requirements.

1 : $727.99
5 : $698.87
10 : $669.75
25 : $640.63

PE3W12064

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to MHV Male Cable Using RG393 Coax. PE3W12064 is a 7/16 DIN male right angle to MHV male cable using RG393 coax. This Pasternack 7/16 DIN male right angle to MHV male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm MHV for connector 2. 7/16 DIN right angle to MHV coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12064 7/16 DIN male right angle to MHV male cable assembly is constructed with RG393 coax.

PE3W01206/HS-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MCX Jack to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-200CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-200CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE3W01206/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Jack to SMA Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-24 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-24 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

PE3W12069/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 2.92mm Male to 1.85mm Male Cable Using Tinned RG405 Coax with HeatShrink. PE3W12069/HS is a 2.92mm male to 1.85mm male cable using RG405 Tinned coax. This Pasternack 2.92mm male to 1.85mm male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our male 2.92mm to male 1.85mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12069/HS 2.92mm male to 1.85mm male cable assembly is constructed with RG405 Tinned coax.

PE3W01206/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MCX Jack to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-48 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-48 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $84.59
25 : $80.36
50 : $76.13
100 : $72.75

PE3W12065

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to MHV Male Cable Using RG393 Coax. PE3W12065 is a 7/16 DIN male to MHV male cable using RG393 coax. This Pasternack 7/16 DIN male to MHV male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm MHV for connector 2. Our male 7/16 DIN to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12065 7/16 DIN male to MHV male cable assembly is constructed with RG393 coax.

PE3W01206/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to SMA Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3W12063

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Female Bulkhead Cable Using PE-SR405FLJ Coax. PE3W12063 is a MMCX plug to SMA female bulkhead cable using PE-SR405FLJ coax. This Pasternack MMCX plug to SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMCX to female SMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W12063 MMCX plug to SMA female bulkhead cable assembly is constructed with PE-SR405FLJ coax.

PE3W12066

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. BNC Female to BNC Female Cable Using PE-SR402AL Coax. PE3W12066 is a BNC female to BNC female cable using PE-SR402AL coax. This Pasternack BNC female to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC to female BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12066 BNC female to BNC female cable assembly is constructed with PE-SR402AL coax.

PE3C11206

Pasternack Enterprises

PE3W01206/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MCX Jack to SMA Male Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-36 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-36 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $83.49
25 : $79.32
50 : $75.14
100 : $71.8

Venkel Ltd.

C1206C0G101-102JNP

VENKEL LTD

Chip Capacitor;1206;C0G;100V;1000pF;�5%
RoHS : Compliant

84,000

C1206C0G500-100JNE

VENKEL LTD

Chip Capacitor;1206;C0G;50V;10pF;�5%
RoHS : Compliant

28,000

C1206C0G101-472JNP

VENKEL LTD

Chip Capacitor;1206;C0G;100V;4700pF;�5%
RoHS : Compliant

8,000

C1206C0G101-391JNP

VENKEL LTD

Chip Capacitor;1206;C0G;100V;390pF;�5%
RoHS : Compliant

6,000

C1206C0G101-220JNE

VENKEL LTD

Chip Capacitor;1206;C0G;100V;22pF;�5%
RoHS : Compliant

C1206C0G101-222FPE

VENKEL LTD

Chip Capacitor;1206;C0G;100V;2200pF;�1%;Pd
RoHS : Compliant

C1206C0G101-330GNP

VENKEL LTD

Chip Capacitor;1206;C0G;100V;33pF;�2%
RoHS : Compliant

C1206C0G101-560JNP

VENKEL LTD

Chip Capacitor;1206;C0G;100V;56pF;�5%
RoHS : Compliant

C1206C0G101-5R0BNP

VENKEL LTD

Chip Capacitor;1206;C0G;100V;5pF;�0.1pF
RoHS : Compliant

C1206C0G102-331JNE

VENKEL LTD

HV Chip Capacitor;1206;C0G;1000V;330pF;�5%
RoHS : Compliant

C1206C0G202-100JNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;2000V;10pF;�5%
RoHS : Compliant

C1206C0G202-470JNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;2000V;47pF;�5%
RoHS : Compliant

C1206C0G202-470KNE

VENKEL LTD

HV Chip Capacitor;1206;C0G;2000V;47pF;�10%
RoHS : Compliant

C1206C0G251-561JNE

VENKEL LTD

HV Chip Capacitor;1206;C0G;250V;560pF;�5%
RoHS : Compliant

C1206C0G302-150JNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;3000V;15pF;�5%
RoHS : Compliant

Vyrian

VJ1206Y222JXBAP

Vishay Intertechnologies

Ceramic Capacitor, Multilayer, Ceramic, 100V, 5% +Tol, 5% -Tol, X7R, 15% TC, 0.0022uF, Surface Mount, 1206
RoHS : Compliant

14,927

WSL12063L000FEK18

Vishay Intertechnologies

Fixed Resistor, Metal Strip, 0.5W, 0.003ohm, 0.0387V, 1% +/-Tol, 150ppm/Cel, Surface Mount, 1206
RoHS : Compliant

13,080

CRM1206AFX-R220ELF

Bourns Inc

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 0.22ohm, 0.675V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206
RoHS : Compliant

12,617

1731120600

Molex

Connector Accessory, Screw Item, Steel
RoHS : Compliant

4,742

C1206C473K8RAC

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 10V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.047uF, Surface Mount, 1206

819

MC0.125W12061%2K7

Multicomp Pro

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 2700ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206

747

MC0125W120613K16

Multicomp Pro

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 3160ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206

620

CRCW120616R0FKEC

Vishay Intertechnologies

Fixed Resistor, Metal Glaze/thick Film, 0.25W, 16ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206
RoHS : Compliant

595

MC0.125W12061%2K49

Multicomp Pro

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 2490ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206

595

MC1206B475K500CT

Multicomp Pro

Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 4.7uF, Surface Mount, 1206

407

MC0125W120612K

Multicomp Pro

Fixed Resistor, Metal Glaze/thick Film, 0.125W, 2000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206

401

C1206C106M4RACTM

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 16V, 20% +Tol, 20% -Tol, X7R, 15% TC, 10uF, Surface Mount, 1206

386

PTN1206Y1000BST1

Vishay Intertechnologies

Fixed Resistor, Thin Film, 0.4W, 100ohm, 200V, 0.1% +/-Tol, 10ppm/Cel, Surface Mount, 1206
RoHS : Compliant

380

12067A391JAT2A

KYOCERA AVX

Ceramic Capacitor, Multilayer, Ceramic, 500V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00039uF, Surface Mount, 1206

312

C1206H104J3GACT500

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.1uF, Surface Mount, 1206

296

Waytek, Inc.

12066614

Aptiv PLC

16-14 GA Female Metri-Pack 630 Terminal 12066614 2000/Reel
RoHS : Compliant

2,000 : $0.1341
10,000 : $0.1252

12,480

12064736

Aptiv PLC

10 GA Metri-Pack 630 Male 12064736 Reel Terminal 1000/Reel
RoHS : Compliant

1,000 : $0.2578
5,000 : $0.241

6,000

12064734

Aptiv PLC

18-20 GA Metri-Pack 630 Male 12064734 Terminal Reel
RoHS : Compliant

1,200 : $0.2045
6,000 : $0.1887

4,800

12064736-L

Aptiv PLC

10 GA Male 630 Metri-Pack 12064736 Loose Piece Terminal

25 : $0.6073
50 : $0.5616
100 : $0.5074
200 : $0.4741
500 : $0.4451
1,000 : $0.4284

4,043

12064735

Aptiv PLC

Metri-Pack 630 Male 14-16 GA 12064735 Reel Terminal
RoHS : Compliant

1,200 : $0.1801
6,000 : $0.1693

3,600

12065158

Aptiv PLC

Weather Pack Female Tower 5 Way Round Connector

10 : $0.8969
50 : $0.8108
100 : $0.7425
200 : $0.7187
500 : $0.698
1,000 : $0.6742

3,514

12065197

Aptiv PLC

12 GA Metri-Pack 480 Male 12065197 Reel Terminal
RoHS : Compliant

1,200 : $0.1665
6,000 : $0.1555

2,400

1-2066502-3

TE Connectivity

TE 2 Position Mini Fuse Holder Cover
RoHS : Compliant

10 : $0.7734
50 : $0.7452
100 : $0.721
200 : $0.6848
500 : $0.6606
1,000 : $0.6364

1,793

12064734-L

Aptiv PLC

20-18GA 630 Male Metri-Pack 12064734 Terminal Loose Piece

25 : $0.505
50 : $0.4623
100 : $0.4168
200 : $0.3874
500 : $0.3701
1,000 : $0.3474

1,645

12064735-L

Aptiv PLC

16-14 GA Male 630 Metri-Pack 12064735 Loose Piece Terminal

25 : $0.3718
50 : $0.3576
100 : $0.346
200 : $0.3292
500 : $0.3176
1,000 : $0.3073

1,555

12065197-L

Aptiv PLC

12 GA Male 480 Metri-Pack 12065197 Loose Piece Terminal

25 : $0.4662
50 : $0.429
100 : $0.3997
200 : $0.3907
500 : $0.3817
1,000 : $0.3716

1,468

12066493-L

Aptiv PLC

12-10 GA Male Metri-Pack 630 Loose Piece Terminal 12066493-L

25 : $0.4444
50 : $0.3975
100 : $0.3621
200 : $0.3507
500 : $0.3393
1,000 : $0.3266

1,222

21206-P5

FTZ Industries

FTZ Industries 21206-6 extra heavy-duty heat shrink kit refill is black adhesive-lined tubing with a .750" size for rugged cable, splice, and termination protection. Its thick-wall construction supports strong moisture sealing and abrasion resistance, and this refill pack includes 5 pieces for restocking heat-shrink kits.

10 : $2.32
10 : $1.99
20 : $1.89
50 : $1.72

545

806-1206

Xantrex Technology Inc

Xantrex PROWatt SW 600 Inverter

1 : $308.864
5 : $302.768
10 : $298.704
25 : $294.64
50 : $288.544

12064737

Aptiv PLC

12 GA Metri-Pack 630 Male 12064737 Reel Terminal
RoHS : Compliant

1,200 : $0.2317
6,000 : $0.2163

Win Source Electronics

WSL1206R0500FEA

Vishay Huntington

RES SMD 0.05 OHM 1% 1/4W 1206

1,540 : $0.1954
1,150 : $0.218
890 : $0.2255
645 : $0.233
420 : $0.2405
175 : $0.2931

67,100

S-1206B33-M3T1U

ABLIC Inc.

IC REG LINEAR 3.3V 0.25A SOT23-3 / LDO Regulator Pos 3.3V 0.25A 3-Pin SOT-23 T/R
RoHS : Compliant

2,415 : $0.1244
1,805 : $0.1388
1,395 : $0.1435
1,015 : $0.1483
655 : $0.1531
270 : $0.1866

65,030

CC1206KKX7R9BB225

YAGEO Corporation

CAP CER 2.2UF 50V X7R 1206
RoHS : Compliant

3,385 : $0.0887
2,530 : $0.0989
1,960 : $0.1023
1,420 : $0.1057
920 : $0.1091
380 : $0.133

60,000

CRCW12060000Z0EAHP

Vishay Huntington

RES SMD 0 OHM JUMPER 3/4W 1206

5,230 : $0.0643
3,910 : $0.0717
3,025 : $0.0741
2,195 : $0.0766
1,420 : $0.0791
585 : $0.0964

50,000

1206L010/60WR

Littelfuse Inc

PTC RESET FUSE 60V 100MA 1206 / Polymeric PTC Resettable Fuse 60V 100 mA Ih Surface Mount 1206 (3216 Metric), Concave
RoHS : Compliant

2,090 : $0.1438
1,560 : $0.1604
1,205 : $0.166
875 : $0.1715
565 : $0.177
235 : $0.2157

25,220

CD1206-S01575

Bourns Inc

DIODE GEN PURP 100V 150MA 1206
RoHS : Compliant

7,615 : $0.0394
5,685 : $0.044
4,400 : $0.0455
3,195 : $0.047
2,065 : $0.0485
850 : $0.0591

21,000

RC1206FR-076K8L

YAGEO Corporation

RES 6.8K OHM 1% 1/4W 1206 / 6.8 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
RoHS : Compliant

18,185 : $0.0165
13,590 : $0.0184
10,530 : $0.019
7,615 : $0.0197
4,930 : $0.0203
2,020 : $0.0248

17,220

39-01-2060

Molex

39-01-2060 Molex Headers & Wire Housings 6 CKT RCPT HOUSING datasheet, inventory, & pricing.
RoHS : Compliant

6,110 : $0.0491
4,575 : $0.0547
3,535 : $0.0566
2,565 : $0.0585
1,660 : $0.0604
680 : $0.0736

17,000

WSL120600000ZEA9

Vishay Huntington

Res Metal Strip 1206 0 Ohm Sulfur Resistant Pad SMD Automotive T/R

10,870 : $0.0276
8,120 : $0.0308
6,270 : $0.0319
4,560 : $0.0329
2,945 : $0.034
1,210 : $0.0414

16,000

1206N221J102CT

Walsin Technology Corporation

MLCC 220PF 1000V NPO 1206 / 220 pF ±5% 1000V (1kV) Ceramic Capacitor C0G, NP0 1206 (3216 Metric)
RoHS : Compliant

12,660 : $0.0237
9,470 : $0.0264
7,330 : $0.0273
5,320 : $0.0282
3,440 : $0.0291
1,410 : $0.0355

12,513

WSLP12063L000FEA

Vishay Huntington

RES 0.003 OHM 1% 1W 1206

3,865 : $0.0777
2,890 : $0.0866
2,235 : $0.0896
1,620 : $0.0926
1,050 : $0.0956
430 : $0.1165

12,393

FSMD012-1206-R

Fuzetec Technology Co Ltd

RESETTABLE FUSE - SMD, 1206 SIZE
RoHS : Compliant

11,195 : $0.0268
8,365 : $0.0299
6,475 : $0.0309
4,705 : $0.0319
3,035 : $0.033
1,245 : $0.0402

6,000

RC1206FR-07200RL

YAGEO Corporation

RES SMD 200 OHM 1% 1/4W 1206
RoHS : Compliant

93,750 : $0.0032
71,430 : $0.0035
54,055 : $0.0037
39,475 : $0.0038
25,645 : $0.0039
10,420 : $0.0048

5,000

RC1206JR-07100KL

YAGEO Corporation

RES SMD 100K OHM 5% 1/4W 1206
RoHS : Compliant

35,295 : $0.0085
26,600 : $0.0094
20,410 : $0.0098
14,855 : $0.0101
9,620 : $0.0104
3,940 : $0.0127

3,459

RC1206FR-072K21L

YAGEO Corporation

RES 2.21K OHM 1% 1/4W 1206 / 2.21 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
RoHS : Compliant

7,615 : $0.0394
5,685 : $0.044
4,400 : $0.0455
3,195 : $0.047
2,065 : $0.0485
850 : $0.0591

800

Wuhan P&S

TNPV12062M00BEEA

Vishay Intertechnologies

High Voltage Thin Film Flat Chip Resistors��2 M�� 0.1% 0.25W
RoHS : Compliant

1 : $1.76
100 : $0.59
500 : $0.55
1,000 : $0.53

205,000

ILHB1206ER601V

Vishay Intertechnologies

High Current Multilayer Ferrite Beads
RoHS : Compliant

1 : $0.39
100 : $0.13
500 : $0.12
1,000 : $0.12

66,000

WSL12065L000FEA18

Vishay Intertechnologies

Power Metal Strip Resistors��5m�� 1% 0.5W
RoHS : Compliant

1 : $4.27
100 : $1.43
500 : $1.32
1,000 : $1.28

52,000

RCS12061K00FKEA

Vishay Intertechnologies

RCS1206 100 1K0 1% ET1 E3
RoHS : Compliant

1 : $0.27
100 : $0.09
500 : $0.09
1,000 : $0.09

50,000

RCS1206100RFKEA

Vishay Intertechnologies

RCS1206 100 100R 1% ET1 E3
RoHS : Compliant

1 : $0.27
100 : $0.09
500 : $0.09
1,000 : $0.09

45,000

CRCW120651R0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors,51�� 1% 0.75W
RoHS : Compliant

1 : $0.34
100 : $0.12
500 : $0.11
1,000 : $0.11

40,000

CRCW1206470RFKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors,
RoHS : Compliant

1 : $0.34
100 : $0.12
500 : $0.11
1,000 : $0.11

30,000

CRCW120675R0FKEA

Vishay Intertechnologies

Standard Thick Film Chip Resistors��75�� 1% 0.25W
RoHS : Compliant

1 : $0.12
100 : $0.04
500 : $0.04
1,000 : $0.04

25,000

CRHV1206AF470MJKFT

Vishay Intertechnologies

Thick Film Chip Resistors, High Voltage
RoHS : Compliant

1 : $22.46
100 : $7.49
500 : $6.93
1,000 : $6.74

20,000

PCAN1206E1000BST5

Vishay Intertechnologies

Thin film resistor-SMD, 2W, 100��, 25ppm, 0.1%, 1206
RoHS : Compliant

1 : $7.82
100 : $2.61
500 : $2.41
1,000 : $2.35

17,500

CRCW120656K0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors
RoHS : Compliant

1 : $0.34
100 : $0.12
500 : $0.11
1,000 : $0.11

10,000

CRCW120610K0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors��10K�� 1% 0.75W
RoHS : Compliant

1 : $0.24
100 : $0.08
500 : $0.08
1,000 : $0.08

10,000

ILB1206ER121V

Vishay Intertechnologies

RoHS : Compliant

1 : $0.31
100 : $0.11
500 : $0.1
1,000 : $0.1

9,000

CRCW12062R00JNEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors2 Ohms ��5% 0.75W
RoHS : Compliant

1 : $0.49
100 : $0.17
500 : $0.15
1,000 : $0.15

5,000

RCA1206221KFHEA

Vishay Intertechnologies

Sulfur Resistant Thick Film Chip Resistors
RoHS : Compliant

1 : $0.24
100 : $0.08
500 : $0.08
1,000 : $0.08

5,000

1206C-R33 Reseller

Enlace URL