| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
11116-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | ASP-111168-03 | Samtec Inc | ASP-111168-03 |
| 18,050 | |
| 99M0111-16-45CK0001 | TE Connectivity | Wire: assembly; 16AWG; Core: Cu,tinned RoHS : Compliant |
| 2,786 | ||
| 55A0111-16-2 | TE Connectivity | Wire; Cu; 1.23mm2; 16AWG; 600V; 100m RoHS : Compliant |
| 2,400 | ||
| 217851-1116 | Molex | Connector: wire-wire; data; Inom: 20A; 600V; PIN: 1; Imax: 20A; tinned |
| 660 | ||
| 1-111623-9 | TE Connectivity | Connector: IDC; socket; female; Plating: gold-plated; PIN: 14 RoHS : Compliant |
| 156 | ||
| 55PC0111-16-6 | TE Connectivity | Wire; Cu RoHS : Compliant |
| 145 | ||
| 1111167 | Bossard Group | Lifting eye bolt; M16; M16x200; 2; Head: eye; steel; zinc; DIN 444B |
| 0 | ||
| 14311116402000 | HARTING Technology Group | Connector: wire-board; plug; female; data; PIN: 11; har-flexicon® |
| 0 | ||
| EV111162 | ECE | Microswitch SNAP ACTION; 11A/250VAC; 0.6A/125VDC; SPST-NO; Pos: 2 |
| 0 | ||
| KD7 00111161021 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| KD7 10111161121 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| EV111163 | ECE | Microswitch SNAP ACTION; 11A/250VAC; 0.6A/125VDC; SPST-NO; Pos: 2 |
| 0 | ||
| KD7 00111161018 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| 1111630000 | Weidmüller Interface GmbH & Co. KG | X: 113mm; Z: 119mm; black RoHS : Compliant |
| 0 | ||
| 14311116102000 | HARTING Technology Group | Connector: wire-board; plug; female; data; PIN: 11; har-flexicon® |
| 0 | ||
![]() Avnet Americas | 1-971111-6-INCH | TE Connectivity | Cable Ribbon 16Conductor 28AWG 30.48m Tin Plated Copper Gray 30V - Bulk (Alt: 1-971111-6-INCH) RoHS : Compliant |
| 828 | |
| 44A0111-16-2-BRL-L117 | TE Connectivity | - Bag (Alt: C34684-000) RoHS : Compliant |
| 0 | ||
| TSW-111-16-G-T-RA | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 3 Rows, 33 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-111-16-G-T-RA) RoHS : Compliant |
| 0 | ||
| 130061-1116 | Molex | MC 4P M/MP 18M 12AWG TRIKEY C SIZE - Bulk (Alt: 1300611116) RoHS : Compliant |
| 0 | ||
| 10138400-111169LF | Amphenol Corporation | Conn Card Edge PL 69 POS 1mm Solder RA Thru-Hole T/R - Tape and Reel (Alt: 10138400-111169LF) RoHS : Compliant |
| 0 | ||
| Y0011116K000V0L | VPG Foil Resistors | High Precision Resistor Metal Foil 116kOhm 0.005% Bulk - Bulk (Alt: Y0011116K000V0L) RoHS : Not Compliant |
| 0 | ||
| 0171111687 | Weidmüller Interface GmbH & Co. KG | CLI C 1-3 GE NE MP - Bulk (Alt: 0171111687) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16KW04-6 | Amphenol Corporation | - Bulk (Alt: A8504911116KW046) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16KW04-6 | Glenair Inc | - Bulk (Alt: M85049/111-16KW04-6) RoHS : Not Compliant |
| 0 | ||
| LCW-111-16-G-S-230 | Samtec Inc | - Bulk (Alt: LCW-111-16-G-S-230) RoHS : Compliant |
| 0 | ||
| YK1111633000G | Amphenol Corporation | - Bulk (Alt: YK1111633000G) RoHS : Compliant |
| 0 | ||
| 1111631 | Qorvo | - Waffle Pack (Alt: 1111631) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16KZ04-6 | Amphenol Corporation | Pre-Shield Adapter Spin Coupling for MIL-DTL-26482 Series 2/MIL-DTL-5015 Matrix/MIL-DTL-83723 Serie - Bulk (Alt: A8504911116KZ046) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16KZ04-6 | Glenair Inc | - Bulk (Alt: M85049/111-16KZ04-6) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16TZ05-6D | Amphenol Corporation | Pre-Shield Adapter Spin Coupling for MIL-DTL-26482 Series 2/MIL-DTL-5015 Matrix/MIL-DTL-83723 Series III Right Angle Circular Connector Straight 16 Shell Size - Bulk (Alt: A8504911116TZ056D) RoHS : Not Compliant |
| 0 | ||
![]() Newark | TSW-111-16-G-D | Samtec Inc | Header, 2.54Mm, Tht Vert, 22Way; |Samtec, Inc. TSW-111-16-G-D RoHS : Compliant |
| 1,336 | |
| TSW-111-16-L-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 11Way; |Samtec, Inc. TSW-111-16-L-S RoHS : Compliant |
| 518 | ||
| HTSW-111-16-S-S | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 11Pos; |Samtec, Inc. HTSW-111-16-S-S RoHS : Compliant |
| 400 | ||
| TSW-111-16-T-S-RA | Samtec Inc | Header, 2.54Mm, Tht, R/A, 11Way; |Samtec, Inc. TSW-111-16-T-S-RA RoHS : Compliant |
| 395 | ||
| TSW-111-16-S-S-RA | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 11Pos; |Samtec, Inc. TSW-111-16-S-S-RA RoHS : Compliant |
| 395 | ||
| 217851-1116 | Molex | Cable Assy, Ring Tongue-Free End, 600Mm; Connector To Connector:Perma-Seal Ring Tongue Terminal To Free End; Cable Length - Imperial:23.6"; Cable Length - Metric:600Mm; Product Range:Perma-Seal Ots 217851 Series; Jacket Color:Black Rohs Compliant: Yes RoHS : Compliant |
| 200 | ||
| TSW-111-16-G-T-RA | Samtec Inc | Header, 2.54Mm, Tht, R/A, 33Way; |Samtec, Inc. TSW-111-16-G-T-RA RoHS : Compliant |
| 115 | ||
| 216301-1116 | Molex | Cable Assy, Crimp Skt-Free End, 600Mm; Connector To Connector:Mx150 Crimp Terminal Socket To Free End; Cable Length - Imperial:23.6"; Cable Length - Metric:600Mm; Product Range:Mx150 Ots 216301 Series; Jacket Color:Black Rohs Compliant: Yes RoHS : Compliant |
| 86 | ||
| 622-300-1-1-11-6-20 | NOSHOK Inc | Explosion-Proof Pressure Transmitter; |Noshok 622-300-1-1-11-6-20 RoHS : Compliant |
| 19 | ||
| 622-1000-1-1-11-6 | NOSHOK Inc | Explosion-Proof Pressure Transmitter; |Noshok 622-1000-1-1-11-6 RoHS : Compliant |
| 12 | ||
| 622-300-1-1-11-6 | NOSHOK Inc | Explosion-Proof Pressure Transmitter; |Noshok 622-300-1-1-11-6 RoHS : Compliant |
| 11 | ||
| 622-5000-1-1-11-6 | NOSHOK Inc | Explosion-Proof Pressure Transmitter; |Noshok 622-5000-1-1-11-6 RoHS : Compliant |
| 7 | ||
| LELHK111-1-62-25.0-U-01-V | Sensata Circuit Breakers | Hydraulic Ckt Protector, 3P, 25A, 1.25Kv; |Sensata/airpax LELHK111-1-62-25.0-U-01-V RoHS : Compliant |
| 3 | ||
| IELHK111-1-62F-90.0-AB-01-V | Sensata Circuit Breakers | Hydraulic Ckt Protector, 3P, 90A, 3.75Kv; |Sensata/airpax IELHK111-1-62F-90.0-AB-01-V RoHS : Compliant |
| 3 | ||
| 11116 | Keystone Electronics Corp | Ptfe Insulated Fork Terminal; |Keystone 11116 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX11116AUT+T | Analog Devices Inc | 2.2V to 3.6V, 8-Bit, 3MSPS SAR RoHS : Compliant |
| 7,642 | |
| MAX11116AUT+ | Analog Devices Inc | 2.2V to 3.6V, 8-Bit, 3MSPS SAR RoHS : Compliant | 0 | |||
![]() RS | 2302-6111-TG (51111629987) | 3M | 2/1R/PSHDR/STR/.230-.120/10MIN/90:10 PAK 100, 2300 SERIES |
| 6,622 | |
| 82050-6000RB (51111653586) | 3M | RIGHT ANGLE CABLE MOUNT IDC CONNECTOR SOCKET, 50 WAY, 2 ROW, 1.27MM PITCH |
| 262 | ||
| 111-16-P (114-09560000 | 111-16-P | 11116P) | Carling Technologies | SWITCH, PANEL MOUNT, 6 A AT 125 VAC, SP, WIRE LEAD, 50000 CYCLES, 25000 CYCLES |
| 210 | ||
| 111-16-57 (110-00008346|111-16-57|1111657) | Carling Technologies | SWITCH;TOGGLE;HEAVY ACTION;SPST;110/216 SERIES |
| 12 | ||
| N2550-6002-RB (51111627402) | 3M | HEADER HIGH TEMPERATURE PCB PLUG 50 CONT SOLDER TAIL THRU-HOLE 2500 SERIES 2A |
| 10 | ||
| 111-16-23 (110-06754000|111-16-23|1111623) | Carling Technologies | SWITCH;TOGGLE;HEAVY ACTION;SPST;110/216 SERIES |
| 10 | ||
| 1MG26-LFW0-00C-200 (00051111655641) | 3M | SHRUNK DELTA RIBBON (SDR) CABLE ASSEMBLY, 1MG26-LFW0-00C-XXX SERIES |
| 7 | ||
| 130201-1111 (65-0086) | Woodhead Molex | MINI CHANGE, PLUG A-SIZE, CLOSURE CAP, DIE CAST WITH BEAD CHAIN, LOOP 65-0086 |
| 5 | ||
| LELHK111-1-62-25.0-U-01-V | Sensata Technologies | CIRCUIT BREAKER, HYDRAULIC MAGNETIC, 3 POLE, LEL SERIES |
| 3 | ||
| SDS 1 11/16 | Martin Sprocket & Gear Inc | BUSHING, QD, QUICK DISCONNECT, SDS, 1 11/16" BORE |
| 2 | ||
| 1SF26-L120-00C-200 (00051111657904) | 3M | SHRUNK DELTA RIBBON (SDR) CABLE ASSEMBLY, 1SF26L1XX00CXXX SERIES |
| 2 | ||
| 11116 | ELESA USA | HCV.127-E-ST-NC-M12, ELECTRICAL LEVEL INDICATORS, OIL ELECTRICAL LEVEL INDICATO |
| 0 | ||
| 11116 | Keystone Electronics Corp | PTFE INSULATED FORK TERMINAL RoHS : Compliant |
| 0 | ||
| 11116 | Marinco Electrical Group | DUAL TRUMP.AIR HORN BULK DUAL |
| 0 | ||
| 11116 | Lapp Group | NPT-1" PG-16 ADAPTER |
| 0 | ||
![]() Bisco Industries | 1111641 | Unbrako Group | 2,050 | |||
| 1111608 | Unbrako Group | 1,975 | ||||
| 1111689 | Unbrako Group | 1,050 | ||||
| 1111623 | Unbrako Group | 375 | ||||
| MS35311-116 | MS HEX CAP SCREWS | 206 | ||||
| 81-11-160-20 | Southco | 81 Dzus Lion Quarter-Turn Fasteners |
| 138 | ||
| 3/8-24X1 11/16 G8 ZC | HEX HEAD CAP SCREWS | 52 | ||||
| NAS1611-116A | NAS O-RINGS | 48 | ||||
| 5/16-24X1 11/16 SS PS | HEX HEAD CAP SCREWS | 35 | ||||
| M83461/1-116 | Military Specifications | 20 | ||||
| 1-111626-9 | TE Connectivity | RoHS : Compliant | 2 | |||
| 1-111626-7 | TE Connectivity | RoHS : Compliant | 1 | |||
![]() Rochester Electronics | W48C111-16H | Cypress Semiconductor | Clock Generators and Synthesizers Frequency Generator 100MHz 28-SOP Tube RoHS : Not Compliant |
| 4,197 | |
W48C111-16HT![]() | Cypress Semiconductor | Clock Generators and Synthesizers Frequency Generator 100MHz 28-SOP RoHS : Not Compliant |
| 1,000 | ||
![]() Sager | 11116 | Keystone Electronics Corp | Circuit Board Hardware - PCB .212 x .390 Fork Turret .148 Dia RoHS : Compliant |
| 0 | |
| 111-16-22-XMC1 | Carling Technologies | Toggle Switches 110/216-Series Toggle Switch | 0 | |||
| 323-11-116-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets Interconnect Socket RoHS : Compliant | 0 | |||
| 55A0111-16-9-L094 | TE Connectivity | Hook-up Wire | 0 | |||
| 44AM1111-16-92-9 | TE Connectivity | TE Connectivity | 0 | |||
| 44AM1111-16-906-9 | TE Connectivity | TE Connectivity | 0 | |||
| 44AM1111-16-951-9 | TE Connectivity | TE Connectivity | 0 | |||
| 55A0111-16-2CS1880 | TE Connectivity | Hook-up Wire | 0 | |||
| 712-11-116-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOLDER TAIL CARRIER RoHS : Compliant |
| 0 | ||
| 9811116120 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| IELK1111-1-62-15.0-01-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IELR111-1-61-2.50-01-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IELR1111-1-62-50.0-AD-01-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IPA-111-1-62-25.0-A-01-T | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| IPA111-1-62-15.0-A-01-T | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
![]() ComSIT USA | W48C11116H | Cypress Semiconductor | FREQUENCY GENERATOR FOR INTEGRATED CORE LOGIC Processor Specific Clock Generator, 100MHz, CMOS, PDSO28 RoHS : Not Compliant | 45 | ||
![]() Interstate Connecting Components | M85049/11-116S | MISC MIL-AERO | D188 - BACKSHELL ENVIRON STRT MIL SS | 2 | ||
| 121-101-1-1-16BET | Glenair Inc | CONDUIT UNSHIELDED | 0 | |||
| 44A0111-16-4CK0001 | TE Connectivity | 44A0111-16-4CK0001 | 0 | |||
| 44A0111-16-90 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 44A0111-16-90-L030 | TE Connectivity | 44A0111-16-90-L030 RoHS : Compliant | 0 | |||
| 44A0111-16-92-MX | TE Connectivity | 282598-002 WIRE RoHS : Compliant |
| 0 | ||
| 44A0111-16-9CK1001 | TE Connectivity | 44A0111-16-9CK1001 | 0 | |||
| 44A0111-16-922-L030 | TE Connectivity | 44A0111-16-922-L030 RoHS : Compliant | 0 | |||
| 55A0111-16-7(B01) | TE Connectivity | 55A0111-16-7(B01) | 0 | |||
| 55A0111-16-6(B01) | TE Connectivity | 55A0111-16-6(B01) | 0 | |||
| 55PC1111-16-9-9CS2970 | TE Connectivity | 55PC1111-16-9-9CS2970 | 0 | |||
| 82A1111-16-9-90 | TE Connectivity | 82A1111-16-9-90 RoHS : Compliant | 0 | |||
| 10138400-111169LF | Amphenol FCi | CONAN HEADER-10138400-111169LF RoHS : Compliant | 0 | |||
| M85049/11-116S | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| M85049/111-16KW04-6 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant | 0 | |||
![]() NexGen Digital | 110-A-111/16 | WECO Electrical Connectors | 1,000 | |||
![]() Powell Electronics | 55PC0111-16-9CS2502 | TE Connectivity | Connectors |
| 17,615 | |
| ASP-111168-03 | Samtec Inc | Header / Socket Strip |
| 11,913 | ||
| 44A0111-16-4CK0001 | TE Connectivity | Connectors |
| 4,620 | ||
| 44AM1111-16-9-9CS2275 | TE Connectivity | SPEC44 HOOKUP WIRE AM1111 16AWG RoHS : Compliant |
| 2,480 | ||
| 55A0111-16-6 | TE Connectivity | SPEC55 HOOKUP WIRE 0111 16AWG 6 RoHS : Compliant |
| 458 | ||
| HTSW-111-16-S-S | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 264 | ||
| TSW-111-16-T-S-RA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 261 | ||
| 44A0111-16-2-CA | TE Connectivity | Connectors |
| 217 | ||
| TSW-111-16-G-T-RA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 76 | ||
| M85049/111-16KZ04-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 26 | ||
| M85049/111-16TZ05-6D | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 25 | ||
| M85049/111-16TZ08-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 18 | ||
| M85049/111-16KW04-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 16 | ||
| 5991111616 | ModICE | SHS Harness Connector Hand Crimp Tool | |
| 5 | ||
| 44A1111-16-9-9-MX | TE Connectivity | SPEC44 HOOKUP WIRE 1111 16AWG 9-9-MX RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | 55PC2111-16-9-9 | TE Connectivity | High Performance Cable Single RoHS : Compliant |
| 0 | |
| SI5332HD11116-GM2 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 40-P RoHS : Compliant | 0 | |||
| 1-111626-0 | TE Connectivity | Conn IDCConnector F 44 POS 2mm IDT RA Side EntryCa RoHS : Not Compliant |
| 0 | ||
| SI5332HD11116-GM2R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 40-P RoHS : Compliant | 0 | |||
| 44A0111-16-9-L183 | TE Connectivity | High Performance Cable 16AWG 1.83mm Tinned Copper RoHS : Not Compliant | 0 | |||
![]() Chip 1 Exchange | 390-0211-116-440 | INSTOCK | 690 | |||
| BY1111600 | General Electric Company | INSTOCK | 325 | |||
| 205-111-1-61-4A-153-H | INSTOCK | 1 | ||||
| 205-111-1-66-5A-153-A | INSTOCK | 1 | ||||
![]() Avnet Abacus | 5991111616 | Bel Fuse | Hand Crimp Tool for 4250000873 18AWG to 16AWG Terminal (Alt: 5991111616) RoHS : Not Compliant | 0 | ||
| 2002411116 | Molex | (Alt: 2002411116) RoHS : Compliant | 0 | |||
| 2002411116 | Molex | (Alt: 2002411116) RoHS : Compliant | 0 | |||
| 3-971111-6 | TE Connectivity | Flat Cable 12Conductors 28AWG 1524m Tinned Copper GrayRed Edge 300V Reel (Alt: 3-971111-6) RoHS : Compliant | 0 | |||
| 3-971111-6 | TE Connectivity | Flat Cable 12Conductors 28AWG 1524m Tinned Copper GrayRed Edge 300V Reel (Alt: 3-971111-6) RoHS : Compliant | 0 | |||
| 5991111615 | Bel Fuse | (Alt: 5991111615) RoHS : Not Compliant | 0 | |||
| 1-111626-7 | TE Connectivity | Conn IDC Connector F 10 POS 2mm IDT RA Cable Mount (Alt: 1-111626-7) RoHS : Compliant | 0 | |||
| 1-111626-7 | TE Connectivity | Conn IDC Connector F 10 POS 2mm IDT RA Cable Mount (Alt: 1-111626-7) RoHS : Compliant | 0 | |||
| 5991111628 | Bel Fuse | Removal Tool for 18 and 30 Position SHS Harness Connector (Alt: 5991111628) RoHS : Not Compliant | 0 | |||
| 1241.1116.3 | Schurter Electronic Components | MTG 34 Au ge (Alt: 1241.1116.3) RoHS : Compliant | 0 | |||
| YK1111633000G | Amphenol Corporation | (Alt: YK1111633000G) RoHS : Compliant | 0 | |||
| TSW-111-16-G-D | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 2 Rows 22 Contacts Through Hole TSW Series (Alt: TSW-111-16-G-D) RoHS : Compliant | 0 | |||
| 1241.1111.6093 | Schurter Electronic Components | Switch Tactile NO SPST Round Button PC Pins 008A 24VDC 1000000Cycle 3N Panel MountThrough Hole (Alt: 1241.1111.6093) RoHS : Compliant | 0 | |||
| TSW-111-16-L-Q-LA | Samtec Inc | (Alt: TSW-111-16-L-Q-LA) RoHS : Compliant | 0 | |||
| RS301111603C-223026 | Alpine Electronics (Asia) Ltd | slide potentiometer RS301111603C (Alt: 22 3026) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FA11116_LXP-O-90 | LEDIL | LXP Lenses For CREEXPE LEDs (Alt: FA11116_LXP-O-90) RoHS : Compliant | 0 | ||
| S1W0-1111657003-0000004S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin SMD TR (Alt: S1W0-1111657003-0000004S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111659003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin SMD TR (Alt: S1W0-1111659003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111659009-0000003S-00001 | Seoul Semiconductor | LED MID POWER WICOP 2 9V CCT 6500K CRI 90 3 STEP (Alt: S1W0-1111659009-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111657003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin Surface Mount TR (Alt: S1W0-1111657003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111658003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-1111658003-00000000-00001) RoHS : Compliant | 0 | |||
| S1W0-1111659003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-1111659003-00000000-00001) RoHS : Compliant | 0 | |||
| S1WM-1111658009-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin Surface Mount TR (Alt: S1WM-1111658009-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111658003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin Surface Mount TR (Alt: S1W0-1111658003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111657003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-1111657003-00000000-00001) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 1-111626-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,980 | |
| PRN111162201FAP | California Micro Devices | IN STOCK SHIP TODAY RoHS : Unknown |
| 2,500 | ||
| 0111160000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY |
| 1,542 | ||
| 11-116-C | GC Electronics | IN STOCK SHIP TODAY |
| 600 | ||
| CIS51-1116-01 | Tech-Etch | IN STOCK SHIP TODAY | 128 | |||
| 1111601-026T-1 | Electro Cables Inc | IN STOCK SHIP TODAY |
| 60 | ||
![]() DB Roberts | RBF-4.8-11.1-16 | Essentra Components | PUSH-IN RIVET-BLACK;NYLON BARBED PUSH FASTENER |
| 500 | |
| E5-1-111-160 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| RBF-7.1-11.1-16 | Essentra Components | RIVET,BARBED,BLK,.281 IN HOLE, | 0 | |||
| RBF-4-11.1-16 | Essentra Components | RivetBarbedBlk.157 in Hole.44 in Lg Rivet Barbed Black | 0 | |||
| E5-2-111-160 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 1111620000VR | Essentra Components | 0 | ||||
| 1111650000VR | Essentra Components | 0 | ||||
| E1-11/16B | Essentra Components | FLANGED CAP - STD THREADLDPE N | 0 | |||
| A1-11/16A | Essentra Components | ROUND END CAPLDPE BLUE | 0 | |||
| 1111630000VR | Essentra Components | 0 | ||||
| 81-11-160-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| E5-2-111-161 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| MM-01-111-60 | Southco | Rugged construction corrosion-resistant materials and attractive designs make these locks desirable for use in top-of-the-line marine environment applications. Various accessory handle anti-rattle handle self-adjusting door hook and top-stop door-hol | 0 | |||
| 111116 | Essentra Components | 0 | ||||
| 1111600000VR | Essentra Components | 0 | ||||
![]() EBV Elektronik | FA11116_LXP-O-90 | LEDIL | LXP Lenses For CREEXPE LEDs (Alt: FA11116_LXP-O-90) RoHS : Compliant | 0 | ||
![]() Master Electronics | TSW-111-16-F-S | Samtec Inc | RoHS : Compliant |
| 0 | |
| 125-0011-116 | C&K Switches | Pushbutton - Switch cap RoHS : Compliant |
| 0 | ||
| 05111162764 | 3M Interconnect | 3000 Series 2.54mm Pitch 24 Way 2 Row Straight PCB Header Solder Term 2A | 3M N3627-6302RB RoHS : Compliant |
| 0 | ||
| 05111164915 | 3M Interconnect | Conn Ejector Header HDR 68 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 0 | ||
| 05111165068 | 3M Interconnect | Conn Ejector Header HDR 24 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 0 | ||
| 05111165356 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 05111165806 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 05111165851 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 05111165969 | 3M Interconnect | Conn Ejector Header HDR 20 POS 2.54mm Press Fit ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 05111166085 | 3M Interconnect | Conn Socket Strip SKT 44 POS 2mm Solder ST SMD Tray RoHS : Compliant |
| 0 | ||
| 05111166247 | 3M Interconnect | Conn Compact Flash Card HDR 50 POS 0.635mm Solder RA SMD T/R 0.5A RoHS : Compliant |
| 0 | ||
| 05111166328 | 3M Interconnect | Conn PLCC Socket SKT 32 POS 1.27mm Solder ST SMD T/R RoHS : Compliant |
| 0 | ||
| 05111166373 | 3M Interconnect | 80000907594 929647-01-36-EU=36/.100/STR/HDR/1R/.235/.110/PS/ RoHS : Compliant |
| 0 | ||
| 05111166535 | 3M Interconnect | Conn Socket Strip SKT 2 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 05111166616 | 3M Interconnect | Conn Socket Strip SKT 16 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1111664 | Phoenix Contact | Switching Power Supplies TRIO-PS67/1AC/24DC/10/IPD RoHS : Compliant |
| 33 | |
| 61030011116010 | HARTING Technology Group | D-Sub Backshells D-Sub 9pin Inducom Metal Hood version 2, 2 Top Entries, hex screw M3, w/o internal grounding block RoHS : Compliant |
| 23 | ||
| 09459711116 | HARTING Technology Group | Ethernet Cables / Networking Cables CAT5 IP20 PATCH CABL GREEN SHEATH 2.5m RoHS : Compliant |
| 10 | ||
| P1-11116 | OTTO Engineering Inc | Basic / Snap Action Switches Style A Sldr Std Blue Button RoHS : Compliant |
| 8 | ||
| P5-D211116 | OTTO Engineering Inc | Pushbutton Switches Alternate Action 10A SPST, SPDT RoHS : Compliant |
| 7 | ||
| 2210-S221-P1M1-H111-16A | E-T-A | Circuit Breakers MoQ=10 Non-Preferred Part (Build to Order) - Alternative Stocked Part Number 2210-S221-P1M1-Z241-15A 94 RoHS : Compliant |
| 3 | ||
![]() Pasternack Enterprises US | PE3M0111-16 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: M17/119-RG174, RF Cable Impedance: 50 Ohm, Length: 16 inches. MIL-DTL-17 SMA Male to TNC Male Cable 16 Inch Length Using M17/119-RG174 Coax., Radio frequency assembly MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3026 SMA cable connection on one end and M39012/26-0018 TNC cable connection on the other. Our M39012/55-3026 SMA to M39012/26-0018 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3026 SMA to M39012/26-0018 TNC cable is a male to male coax assembly, PE3M0111-16, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly PE3M0111-16 is built with M17/119-RG174 which is a flexible coax type. The Pasternack flexible M39012/55-3026 SMA cable assembly is manufactured with M39012/55-3026 SMA to M39012/26-0018 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3026 SMA male to M39012/26-0018 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0111-16 can also be used in the other direction and will be M39012/26-0018 TNC male to M39012/55-3026 SMA male cable assembly if the opposite connectivity is required. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly for quick shipment worldwide. Variations of M39012/55-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax. |
| 6 | |
| PE3C11116-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-12 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-12 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-12 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-12 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11116-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to TNC Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-48 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-48 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-48 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-48 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11116-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-24 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-24 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-24 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-24 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-24 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11116-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-36 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-36 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-36 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-36 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W11116 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C11116 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Low Loss Cable Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C11116 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | 0 | |||
| PE3C11116-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-60 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-60 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-60 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-60 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | 55A0111-16-92 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 13,169 | ||
| 55A0111-16-90 | TE Connectivity | WIRE AND CABLE RoHS : Compliant | 11,093 | |||
| 44A0111-16-2-MX | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 10,140 | |||
| 55A1111-16-9-9 | TE Connectivity | Wire And Cable, 0AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 9,276 | |||
| 1011116 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,246 | |||
| 55A0111-16-0 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,847 | |||
| 55A0111-16-9 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,524 | |||
| MAX11116AUT+ | Analog Devices Inc | ADC, Successive Approximation, 8-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO6 RoHS : Compliant | 7,741 | |||
| 44A0111-16-09 | TE Connectivity | Wire And Cable, 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 7,307 | |||
| MAX11116AUT+T | Analog Devices Inc | ADC, Successive Approximation, 8-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO6 RoHS : Compliant | 7,217 | |||
| 44A0111-16-95 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 7,002 | |||
| 44A0111-16-0 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 6,177 | |||
| MAX11116AUT-T | Analog Devices (Maxim Integrated) | 5,695 | ||||
| 55A0111-16-6 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 5,539 | |||
| 44A0111-16-94 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 4,210 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |