| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
11115-R2 Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | 100G1111-1.50-0-0 | TE Connectivity | 100G1111-1.50-0-0 |
| 879 | |
| 215341-1115 | Molex | Connector: wire-wire; socket; female; data; Inom: 9A; 600V; PIN: 1 |
| 500 | ||
| 217511-1115 | Molex | Socket; female; Inom: 6.5A; 250V; PIN: 1; crimped; copper alloy; PVC |
| 500 | ||
| 214761-1115 | Molex | Connector: wire-wire; socket; female; data; PIN: 1; 8.5A; tinned |
| 200 | ||
| 111-15405 | HellermannTyton | Cable tie; L: 820mm; W: 8.9mm; polyamide; black; 780N; Ømax: 245mm |
| 100 | ||
| 42R323111150_POWER INLET WITH FUSE | K+B Kaiser | Connector: AC supply; power supply |
| 100 | ||
| 61811115 | Lapp Group | Mounting holder; polyamide 6; SILVYN® KLICK-S; black; Size: 10 |
| 100 | ||
| 0011115 | Lapp Group | Wire; ÖLFLEX® 191; 5G1mm2; unshielded; 300V,500V; Cu; stranded RoHS : Compliant |
| 91 | ||
BZT52H-B11,115![]() | Nexperia | Diode: Zener; 0.375/0.83W; 11V; SMD; SOD123F; Ifmax: 250mA RoHS : Compliant |
| 0 | ||
BZV49-C11,115![]() | Nexperia | Diode: Zener; 1W; 11V; SMD; SOT89; Ifmax: 250mA; single diode RoHS : Compliant |
| 0 | ||
BZX585-B11,115![]() | Nexperia | Diode: Zener; 0.3W; 11V; SMD; SOD523; Ifmax: 200mA; single diode RoHS : Compliant |
| 0 | ||
| 1111150000 | Weidmüller Interface GmbH & Co. KG | Enclosure for connectors: HDC; for cable; side,angled; IP65; M50 RoHS : Compliant |
| 0 | ||
| 14311115102000 | HARTING Technology Group | Connector: wire-board; plug; female; data; PIN: 11; har-flexicon® |
| 0 | ||
| 2111-150J | electro-PJP | Test lead: single; 60VDC; 30VAC; 12A; banana plug 4mm,both sides |
| 0 | ||
| 1-111506-8 | TE Connectivity | Connector: IDC; plug; male; Plating: gold-plated; PIN: 16; straight RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | BZV55-B11,115![]() | Nexperia | Zener Single Diode, 11 V, 500 mW, SOD-80C, 2 Pins, 200 ?C - Tape and Reel (Alt: BZV55-B11,115) RoHS : Compliant |
| 10,000 | |
| 209311-1115 | Molex | Mezzanine Connector, Hermaphroditic, 688 Contacts, 11 Rows, Gold, SMT, Straight, Solder - Tape and Reel (Alt: 2093111115) RoHS : Compliant |
| 750 | ||
| TSW-111-15-S-D | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 2 Rows, 22 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-111-15-S-D) RoHS : Compliant |
| 10 | ||
| RM332-011-111-5900 | Molex | RECTANGULAR, 0.075""/1.91MM, PLUG, SOLDER CUP, 11 POSITION C - Bulk (Alt: RM332-011-111-5900) RoHS : Compliant |
| 5 | ||
| HTSW-111-15-T-D | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 2 Rows, 22 Contacts, Through Hole, HTSW Series - Bulk (Alt: HTSW-111-15-T-D) RoHS : Compliant |
| 0 | ||
| ZDA041111509K41000 | Vishay Intertechnologies | Resistor High Power Wirewound 15 Ohm 10% 2W -10ppm/K to -80ppm/K Cement PC Pin Ammo Pack - Ammo Pack (Alt: ZDA041111509K41000) RoHS : Compliant |
| 0 | ||
BZX585-C11,115![]() | Nexperia | - Tape and Reel (Alt: BZX585-C11,115) RoHS : Compliant |
| 0 | ||
| PT8420-0040-111-1530 | TE Connectivity | - Bulk (Alt: 04-0981-0746) RoHS : Not Compliant |
| 0 | ||
| 70H1-11-15-1-B | TE Connectivity | Braid Tail Backshell for MIL-DTL-38999 III/IV Circular Connectors Shell Size 11 Straight Aluminum Alloy - Bulk (Alt: 70H1-11-15-1-B) RoHS : Not Compliant | 0 | |||
| CA17711-115 | ITT Interconnect Solutions | - Bulk (Alt: 017711-0115) RoHS : Not Compliant |
| 0 | ||
| S1W0-1111509009-00000000-00001 | Seoul Semiconductor | MID POWER WHITE WICOP? - Tape and Reel (Alt: S1W0-1111509009-00000000-00001) RoHS : Not Compliant | 0 | |||
| 228431-1115 | Molex | - Bulk (Alt: 2284311115) RoHS : Compliant |
| 0 | ||
| VQ1111510000G | Amphenol Corporation | - Bulk (Alt: VQ1111510000G) RoHS : Compliant |
| 0 | ||
| RRW21111-153 | Renesas Electronics Corporation | RRW21111-153 - Tape and Reel (Alt: RRW21111-153) RoHS : Compliant | 0 | |||
| PT9420-0300-111-1150 | TE Connectivity | - Bulk (Alt: 04-0979-1214) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 215711-1115 | Molex | Cable Assy, Crimp Pin-Free End, 450Mm; |Molex 215711-1115 RoHS : Compliant |
| 2,811 | |
| TSW-111-15-L-D | Samtec Inc | Header, 2.54Mm, Tht Vert, 22Way; |Samtec, Inc. TSW-111-15-L-D RoHS : Compliant |
| 1,336 | ||
| TSW-111-15-T-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 11Way; |Samtec, Inc. TSW-111-15-T-S RoHS : Compliant |
| 1,336 | ||
| TSW-111-15-G-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 11Way; |Samtec, Inc. TSW-111-15-G-S RoHS : Compliant |
| 1,336 | ||
| 228431-1115 | Molex | Cbl Assy, Micro-Fit+ Cem5 Skt-Skt, 450Mm; |Molex 228431-1115 RoHS : Compliant |
| 750 | ||
| TSW-111-15-G-S-LL | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 11Pos; |Samtec, Inc. TSW-111-15-G-S-LL RoHS : Compliant |
| 387 | ||
| TSW-111-15-T-S-LL | Samtec Inc | Header, 2.54Mm, Tht Vert, 11Way; |Samtec, Inc. TSW-111-15-T-S-LL RoHS : Compliant |
| 387 | ||
| HTSW-111-15-T-D | Samtec Inc | Header, 2.54Mm, Tht Vert, 22Way; |Samtec, Inc. HTSW-111-15-T-D RoHS : Compliant |
| 378 | ||
| MTMM-111-15-G-D-675 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 22Pos; |Samtec, Inc. MTMM-111-15-G-D-675 RoHS : Compliant |
| 341 | ||
| MTMM-111-15-G-D-615 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 22Pos; |Samtec, Inc. MTMM-111-15-G-D-615 RoHS : Compliant |
| 341 | ||
| TSW-111-15-S-T | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 33Pos; |Samtec, Inc. TSW-111-15-S-T RoHS : Compliant |
| 276 | ||
| 217491-1115 | Molex | Cable Assy, Crimp Skt-Free End, 450Mm; |Molex 217491-1115 RoHS : Compliant |
| 250 | ||
| 2163011115 | Molex | Cable Assy, Socket-Free End, Blk, 450Mm; |Molex 2163011115 RoHS : Compliant |
| 100 | ||
| LT-1511-115-024 | Carling Technologies | Toggle Switch, On-Off, Spdt, Illuminated; |Carling Technologies / Littelfuse LT-1511-115-024 RoHS : Compliant |
| 5 | ||
| 11115 | Keystone Electronics Corp | Ptfe Insulated Fork Terminal; |Keystone 11115 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX11115AUT+T | Analog Devices Inc | 2.2V to 3.6V, 8-Bit, 2MSPS SAR RoHS : Compliant |
| 0 | |
| MAX11115AUT+ | Analog Devices Inc | 2.2V to 3.6V, 8-Bit, 2MSPS SAR RoHS : Compliant | 0 | |||
![]() RS | LT-1511-115-012 (GLT-00011000|LT-1511-115-012|LT1511115012) | Carling Technologies | SWITCH;TOGGLE;SPST;ON-NONE-OFF;ILLUM ACTUATOR;RED-CLEAR-CLEAR;12V;15A;125VAC;QC |
| 73 | |
| 53111150 | Lapp Group | SKINTOP STR-M CABLE GLAND, M40X1, 5, PG46, IP69, GRAY RoHS : Compliant |
| 46 | ||
| 2210-S221-P1M1-H111-1.5A | E-T-A | CIRCUIT BREAKER TOGGLE THERMAL-MAG STD DELAY AUX CONTACT QC 2P 277/480VAC 1.5A RoHS : Compliant |
| 40 | ||
| 15-1-11 (15A11B10) | Vishay Sfernice | DIAL, RECTANGULAR, TURNS-COUNTING, DIGITAL, 10 TURNS, DIA 0.25", 3 DIGIT DISPLAY |
| 17 | ||
| 9111115 | RS Pro | STANDARD SLOTTED SCREWDRIVER 0.26 X 0.05 TIP BLADE CHROME VANADIUM STEEL |
| 3 | ||
| T11-1-15.0A-01-10 | Sensata Technologies | CIRCUIT BREAKER, HYDRAULIC, MAGNETIC CIRCUIT PROTECTOR, 1 POLE, 0213 SERIES |
| 3 | ||
| 9111152 | RS Pro | INSULATED JUNIOR HACKSAW 6 |
| 2 | ||
| 9111156 | RS Pro | CABLE KNIFE, 65MM (2.56" ) BLADE, NYLON 11 HANDLE, VDE/1000V, 175MM OVERALL L |
| 2 | ||
| 90104/50 (51111527160) | 3M | CABLE, 50C, 28AWG, 7X36, TC, TPE INS, FOIL, GRAY PVC JKT, CL2 |
| 2 | ||
| 90104/37 (00051111527122) | 3M | CABLE, 37C, 28AWG, 7X36, TC, TPE INS, FOIL, GRAY PVC JKT, CL2 |
| 2 | ||
| 11115 | Keystone Electronics Corp | PTFE INSULATED FORK TERMINAL RoHS : Compliant |
| 0 | ||
| 11115 | ELESA USA | HCV.127-E-ST-NO-M12, ELECTRICAL LEVEL INDICATORS, OIL ELECTRICAL LEVEL INDICATO |
| 0 | ||
| 11115 | Marinco Electrical Group | SNGL TRUMP.AIR HORN BULK SINGLE-LONG |
| 0 | ||
| LT-1511-115-024 (GLT-00011300 | LT-1511-115-024 | LT1511115024) | Carling Technologies | TOGGLE SWITCH, SP, ON-NONE-OFF, PADDLE, ILLUM,24V, RED/CLEAR/CLEAR,15A,125VAC, QC |
| 0 | ||
| LT-1511-115-018 (GLT-00104754 | LT-1511-115-018 | LT1511115018) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
![]() Microchip Technology Inc | KV2111-150A | Microchip Technology Inc | Si TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | ||
| KV2111-154-0 | Microchip Technology Inc | Si TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC4311-115-2 | Microchip Technology Inc | Si NIP Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| KV2111-154-4 | Microchip Technology Inc | Si TVAR Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC4711-115-2 | Microchip Technology Inc | Si Limiter Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Bisco Industries | 1111503 | Unbrako Group | 11,000 | |||
| 1111575 | Unbrako Group | 1,828 | ||||
| 1111-59-0519 | Staffall | 287 | ||||
| M83461/1-115 | Military Specifications | 168 | ||||
| SFJ111-15TA12AE0301 | Shur-Lok Company | 52 | ||||
| NAS1611-115A | NAS O-RINGS | 46 | ||||
| M83461/1-115 | Parco | 26 | ||||
| H110-9111-15 | SOCKET SCREWS | 20 | ||||
| 96-111-15 | Southco | 96 Removable Lift-Off Hinges |
| 20 | ||
| NAS1611-115 | NAS O-RINGS | 12 | ||||
| 11115-SS-1032-7 | Amatom Electronic Hardware | 10 | ||||
| 1111519 | Unbrako Group | 8 | ||||
| SLSHFJ111-15TA16A-EO301 | Shur-Lok Company | 1 | ||||
![]() Rochester Electronics | BZV49-C11,115![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 5%, 1W, Silicon, Unidirectional, TO-243AA RoHS : Compliant |
| 950 | |
BZT52H-B11,115![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 1.82%, 0.375W, Silicon, Unidirectional RoHS : Compliant |
| 1,860 | ||
BZX384-C11,115![]() | NXP Semiconductors | Zener Diode Single 11V 300mW SOD323 T/R RoHS : Compliant |
| 3,000 | ||
BZV90-C11,115![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 5%, 1.5W, Silicon, Unidirectional RoHS : Compliant |
| 14,990 | ||
| PDZ12B/S911,115 | NXP Semiconductors | Voltage regulator diodes |
| 4,600 | ||
BZB784-C11,115![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 5%, 0.35W, Silicon, Unidirectional RoHS : Compliant |
| 48,582 | ||
BZX585-C11,115![]() | Nexperia | Zener Diode Single 11V 300mW SOD-523 T/R RoHS : Compliant |
| 27,000 | ||
PUMF11,115![]() | Nexperia | Digital BJT Array 50V 100mA 300mW SOT-363 T/R RoHS : Compliant |
| 145,000 | ||
BZV49-C11,115![]() | Nexperia | Zener Diode, 11V V(Z), 5%, 1W, Silicon, Unidirectional, TO-243AA RoHS : Compliant |
| 36,646 | ||
BZT52H-B11,115![]() | Nexperia | Zener Diode, 11V V(Z), 1.82%, 0.375W, Silicon, Unidirectional RoHS : Compliant |
| 47,385 | ||
BZX384-C11,115![]() | Nexperia | Zener Diode Single 11V 300mW SOD323 T/R RoHS : Compliant |
| 624,299 | ||
BZV90-C11,115![]() | Nexperia | Zener Diode, 11V V(Z), 5%, 1.5W, Silicon, Unidirectional RoHS : Compliant |
| 27,000 | ||
BZT52H-C11,115![]() | Nexperia | Zener Diode, 11V V(Z), 5.45%, 0.375W, Silicon, Unidirectional RoHS : Compliant |
| 117,000 | ||
PEMH11,115![]() | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 2-Element, NPN, Silicon RoHS : Compliant |
| 4,000 | ||
BZB784-C11,115![]() | Nexperia | Zener Diode, 11V V(Z), 5%, 0.35W, Silicon, Unidirectional RoHS : Compliant |
| 202,500 | ||
![]() Sager | 11115 | Keystone Electronics Corp | Circuit Board Hardware - PCB .150 x .453 Fork Term .148 Dia RoHS : Compliant |
| 0 | |
| 324-11-115-41-002000 | Mill-Max Mfg Corp | IC & Component Sockets Interconnect Socket RoHS : Compliant | 0 | |||
| 311-11-152-41-001000 | Mill-Max Mfg Corp | IC & Component Sockets Interconnect Socket |
| 0 | ||
| 125-0011-115 | C&K Switches | Littelfuse | 0 | |||
| P3-D211115W | OTTO Engineering Inc | DOME STYLE, SEALED, MOMENTARY ACTION PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| MTMM-111-15-G-D-225 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 9811115068 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9811115112 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| PP11-1-1.50A-OB-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| P3-D111115W | OTTO Engineering Inc | DOME STYLE, SEALED, MOMENTARY ACTION PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| 70151-1115 | OMRON Electronic Components | DIP Switches / SIP Switches SGE-125-2-0940 05000C | 0 | |||
| 70H1-11-15-1-B | TE Connectivity | Circular MIL Spec Backshells 70H1-11-15-1-B RoHS : Not Compliant | 0 | |||
| CELHPK1111-1-52-400.-A-01-T | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 9811115131 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9813911115 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Coilcraft Direct | CMT1-1.1-15L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 0 | |
![]() Ameya Holding Limited | PUMH11,115![]() | Nexperia | PUMH11 Series 50 V 100 mA SMT NPN / NPN Resistor-Equipped Transistor - SOT-363 RoHS : Compliant | 1,008,000 | ||
BZX585-B11,115![]() | Nexperia | SOD523/Voltage regulator diodes/12NC:934055872115 RoHS : Compliant | 225,000 | |||
BZV55-C11,115![]() | Nexperia | BZV55 Series 11 V ±5 % 500 mW Surface Mount Voltage Regulator Diode - SOD-80C RoHS : Compliant | 210,000 | |||
PUMB11,115![]() | Nexperia | SOT363/REEL7/PNP/PNP RESISTOR-EQUIPPED TRANSISTORS; R1 = 10 KOHM, R2 = 10 K RoHS : Compliant | 3,793 | |||
![]() ComSIT USA | PUMH11115 | NXP Semiconductors | N-Channel MOSFET, 30V, 3A, SOT-23 RoHS : Compliant | 3,285 | ||
| BZX384B11115 | NXP Semiconductors | Diode Zener Single 11V 2% 300mW 2-Pin SOD-323 T/R RoHS : Compliant | 995 | |||
![]() Interstate Connecting Components | A8504911115X | Amphenol PCD | M8504911-115X | 0 | ||
| PT9420-0300-211-1150 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| VQ1111510000G | Amphenol Anytek | VQ-3.5-11P GREEN WITH COVER | 0 | |||
| EL1111520000G | Amphenol Anytek | EL-3.5- 11P GREENNEW TYPERAL60 | 0 | |||
| 100G0111-1.50-6 | TE Connectivity | 4997813001 1-1193736-9 RoHS : Compliant |
| 0 | ||
| YK1111533000G | Amphenol Anytek | YK-111- 15P BLACK - COMBINAT | 0 | |||
| TS11115D0000G | Amphenol Anytek | TS -3.5 -11P GREEN - ZINC | 0 | |||
| L17TF2511115 | Amphenol Commercial | DSUB, STAMPED SIGNAL 3A, STRAI | 0 | |||
| 10114831-11115LF | Amphenol FCi | WTB 1.25 WAFER 90 DIP-10114831 RoHS : Compliant | 0 | |||
| FLT0111-1.50-0 | TE Connectivity | FLT0111-1.50-0 RoHS : Compliant | 0 | |||
| 1-111506-8 | TE Connectivity | 016 UNIV I/O 30DP SLOT LTCH RoHS : Compliant |
| 0 | ||
| 155661-1115 | ITT Interconnect Solutions | MKJ4C10W6-6BB | 0 | |||
| 8-41-11-150 | SOURIAU-SUNBANK | CONNECTOR ELEC | 0 | |||
| L17TF0911115 | Amphenol Commercial | DSUB, STAMPED SIGNAL 3A, STRAI | 0 | |||
| V71111510000G | Amphenol Anytek | V7-3.5-11P WO FLANGE-GREEN-RA | 0 | |||
![]() PEI Genesis | CA17711-115 | ITT Interconnect Solutions |
| 0 | ||
| L17TF0911115 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| 599-11-11-580 | Cinch Connectivity Solutions |
| 0 | |||
| 00326111159 | Amphenol PCD |
| 0 | |||
| 00326111159 | Amphenol Aerospace |
| 0 | |||
| M85049/11-115W | Amphenol PCD |
| 0 | |||
| M85049/11-115W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/11-115S | SOURIAU-SUNBANK |
| 0 | |||
| M85049/11-115N | Amphenol PCD |
| 0 | |||
| M85049/11-115N | SOURIAU-SUNBANK |
| 0 | |||
| M85049/11-115B | SOURIAU-SUNBANK |
| 0 | |||
| M85049/11-115Z | Amphenol PCD |
| 0 | |||
| 599-11-11-589 | Cinch Connectivity Solutions |
| 0 | |||
| 599-11-11-592 | Cinch Connectivity Solutions |
| 0 | |||
![]() Powell Electronics | 100G0111-1.5-0CK0042 | TE Connectivity | Connectors |
| 19,784 | |
| 100E0111-1.50-9CK0001 | TE Connectivity | Connectors RoHS : Compliant |
| 15,180 | ||
| FLT0111-1.50-0 | TE Connectivity | CABLE-PROTECTION PART FLT0111-1.50-0 RoHS : Compliant |
| 12,619 | ||
| HW-01-12-T-S-711-115 | Samtec Inc | Cable Assembly, Wire-to-Board, High-Prof RoHS : Compliant |
| 2,006 | ||
| TSW-111-15-L-D | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 882 | ||
| TSW-111-15-T-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 882 | ||
| TSW-111-15-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 882 | ||
| TSW-111-15-G-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 882 | ||
| TSW-111-15-T-S-LL | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 255 | ||
| HTSW-111-15-T-D | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 249 | ||
| MTMM-111-15-G-D-675 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 225 | ||
| MTMM-111-15-G-D-615 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 225 | ||
| 2511115/1M | Altech Corporation | TS35x7.5 DIN Rail, Stainless |
| 224 | ||
| TSW-111-15-S-T | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 182 | ||
| 1-111504-6 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 33 | ||
![]() PUI | 8933-D111158GAACA06B | 778 | ||||
| 8933-D111158GAACD02B | 230 | |||||
| 8933-C111158GAACD02B | 190 | |||||
| 8933-C111158BAACA12A | 18 | |||||
![]() Chip 1 Exchange | PUMH11,115 | INSTOCK | 60,000 | |||
PUMH11,115![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 54,000 | |||
| PUMH11,115 | Philco/Philips | INSTOCK | 15,000 | |||
| BZX585-B11 115 | Nexperia | INSTOCK | 9,000 | |||
| BZX585B11115 | Nexperia | INSTOCK | 9,000 | |||
PUMH11,115![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 6,242 | |||
| PUMB11,115 | INSTOCK | 2,000 | ||||
| 1D51111-501 | INSTOCK | 24 | ||||
MACH111-15JC![]() | AMD | INSTOCK RoHS : Not Compliant | 6 | |||
| EA1506011115 | SUM | INSTOCK | 2 | |||
![]() Avnet Abacus | 2002411115 | Molex | Connector PCB Header Shrouded Straight 5 Position 1 Row Through Hole (Alt: 2002411115) RoHS : Compliant | 550 | ||
| 1-111506-8 | TE Connectivity | Conn Ejector Header HDR 16 POS 254mm IDT RA Cable Mount Bulk (Alt: 1-111506-8) RoHS : Compliant | 0 | |||
| 1-111506-8 | TE Connectivity | Conn Ejector Header HDR 16 POS 254mm IDT RA Cable Mount Bulk (Alt: 1-111506-8) RoHS : Compliant | 0 | |||
| 1-111506-4 | TE Connectivity | Conn Ejector Header HDR 50 POS 254mm IDT RA Cable Mount Bulk (Alt: 1-111506-4) RoHS : Compliant | 0 | |||
| 1241.1115.3 | Schurter Electronic Components | MTG 34 AG GE (Alt: 1241.1115.3) RoHS : Compliant | 0 | |||
| VQ1111510000G | Amphenol Corporation | (Alt: VQ1111510000G) RoHS : Compliant | 0 | |||
| EL1111520000G | Amphenol Corporation | (Alt: EL1111520000G) RoHS : Compliant | 0 | |||
| YK1111533000G | Amphenol Corporation | (Alt: YK1111533000G) RoHS : Compliant | 0 | |||
| TS11115D0000G | Amphenol Corporation | (Alt: TS11115D0000G) RoHS : Compliant | 0 | |||
| V71111510000G | Amphenol Corporation | (Alt: V71111510000G) RoHS : Compliant | 0 | |||
| 77311-115-12LF | Amphenol Corporation | Conn Unshrouded Header HDR 12 POS 254mm Solder ST ThruHole Bag (Alt: 77311-115-12LF) RoHS : Compliant | 0 | |||
| 77311-115-36LF | Amphenol Corporation | Conn Unshrouded Header HDR 36 POS 254mm Solder ST ThruHole Bag (Alt: 77311-115-36LF) RoHS : Compliant | 0 | |||
| TSW-111-15-L-D | Samtec Inc | (Alt: TSW-111-15-L-D) RoHS : Compliant | 0 | |||
| TSW-111-15-T-S | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 1 Rows 11 Contacts Through Hole TSW Series (Alt: TSW-111-15-T-S) RoHS : Compliant | 0 | |||
| XF3M111151BR100 | Aratas Corporation | Conn FFCFPC Connector SKT 11 POS 1mm Solder RA SMD Reel (Alt: XF3M111151BR100) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BZT52H-C11,115![]() | Nexperia | Diode Zener Single 11V 5% 830mW 2-Pin SOD-123F T/R (Alt: BZT52H-C11,115) RoHS : Compliant |
| 48,000 | |
PUMH11,115![]() | Nexperia | Trans Digital BJT NPN 50V 100mA 6-Pin TSSOP T/R (Alt: PUMH11,115) RoHS : Compliant |
| 3,000 | ||
BZX585-C11,115![]() | Nexperia | (Alt: BZX585-C11,115) RoHS : Compliant | 0 | |||
BZX585-B11,115![]() | Nexperia | Diode Zener Single 11V 2% 300mW 2-Pin SOD-523 T/R (Alt: BZX585-B11,115) RoHS : Compliant | 0 | |||
BZX384-C11,115![]() | Nexperia | Diode Zener Single 11V 5% 300mW 2-Pin SOD-323 T/R (Alt: BZX384-C11,115) RoHS : Compliant | 0 | |||
PUMB11,115![]() | Nexperia | Trans Digital BJT PNP 50V 100mA 6-Pin TSSOP T/R (Alt: PUMB11,115) RoHS : Compliant |
| 0 | ||
PEMH11,115![]() | Nexperia | Trans Digital BJT NPN 50V 100mA 6-Pin SOT-666 T/R (Alt: PEMH11,115) RoHS : Compliant | 0 | |||
BZV55-B11,115![]() | Nexperia | Zener Single Diode, 11 V, 500 mW, SOD-80C, 2 Pins, 200 ?C (Alt: BZV55-B11,115) RoHS : Compliant | 0 | |||
BZX84J-B11,115![]() | Nexperia | (Alt: BZX84J-B11,115) RoHS : Compliant | 0 | |||
PEMB11,115![]() | Nexperia | Trans Digital BJT PNP 50V 100mA 6-Pin SOT-666 T/R (Alt: PEMB11,115) RoHS : Compliant | 0 | |||
BZV55-C11,115![]() | Nexperia | Diode Zener Single 11V 5% 500mW 2-Pin Mini-MELF T/R (Alt: BZV55-C11,115) RoHS : Compliant | 0 | |||
| 10208612-111115LF | Amphenol Corporation | (Alt: 10208612-111115LF) RoHS : Compliant | 0 | |||
| 10208613-111115LF | Amphenol Corporation | (Alt: 10208613-111115LF) RoHS : Compliant | 0 | |||
BZT52H-B11,115![]() | Nexperia | Diode Zener Single 11V 2% 830mW 2-Pin SOD-123F T/R (Alt: BZT52H-B11,115) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | PUMH11,115![]() | Nexperia | Trans Digital BJT NPN 50V 100mA 6Pin TSSOP TR (Alt: PUMH11,115) RoHS : Compliant | 873,000 | ||
BZV55-C11,115![]() | Nexperia | Diode Zener Single 11V 5 500mW 2Pin MiniMELF TR (Alt: BZV55-C11,115) RoHS : Compliant | 212,500 | |||
BZX84J-C11,115![]() | Nexperia | (Alt: BZX84J-C11,115) RoHS : Compliant | 15,000 | |||
PEMH11,115![]() | Nexperia | Trans Digital BJT NPN 50V 100mA 6Pin SOT666 TR (Alt: PEMH11,115) RoHS : Compliant | 12,000 | |||
PUMB11,115![]() | Nexperia | Trans Digital BJT PNP 50V 100mA 6Pin TSSOP TR (Alt: PUMB11,115) RoHS : Compliant | 3,000 | |||
| RRW21111-153 | Renesas Electronics Corporation | RRW21111153 (Alt: RRW21111-153) RoHS : Compliant | 0 | |||
| RRW22111-153 | Renesas Electronics Corporation | RRW22111153 (Alt: RRW22111-153) RoHS : Compliant | 0 | |||
BZV49-C11,115![]() | Nexperia | Diode Zener Single Dual Anode 11V 5 1W 4Pin3Tab SOT89 TR (Alt: BZV49-C11,115) RoHS : Compliant | 0 | |||
BZT52H-B11,115![]() | Nexperia | Diode Zener Single 11V 2 830mW 2Pin SOD123F TR (Alt: BZT52H-B11,115) RoHS : Compliant | 0 | |||
| S1W0-1111507003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-1111507003-00000000-00001) RoHS : Compliant | 0 | |||
| S1W0-1111578003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-1111578003-00000000-00001) RoHS : Compliant | 0 | |||
| S1W0-1111507003-0000004S-00001 | Seoul Semiconductor | LED Chip Cool White 5000K 700mA 2Pin SMD TR (Alt: S1W0-1111507003-0000004S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111578003-0000004S-00001 | Seoul Semiconductor | LED Chip Cool White 5700K 230mA 2Pin SMD TR (Alt: S1W0-1111578003-0000004S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111577003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 5700K 700mA 2Pin Surface Mount TR (Alt: S1W0-1111577003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111578003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 5700K 230mA 2Pin SMD TR (Alt: S1W0-1111578003-0000003S-00001) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 2238-911-11563 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 3,043 | |
| V11115 | Vishay Siliconix | IN STOCK SHIP TODAY | 1,522 | |||
| IEL111-1-52-50.0-01-V | Airpax | IN STOCK SHIP TODAY |
| 201 | ||
| 110-A-111/15 | WECO Electrical Connectors | IN STOCK SHIP TODAY |
| 30 | ||
| 07.311.1153.0 | Wieland Electric GmbH | IN STOCK SHIP TODAY |
| 30 | ||
| 1-111595-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 25 | ||
| CW-2C-1-111-5% | Vishay Dale | IN STOCK SHIP TODAY |
| 19 | ||
| 44R02-3111-150 | POWER | IN STOCK SHIP TODAY | 7 | |||
![]() DB Roberts | 11115 | Essentra Components | 0 | |||
| 1111540000VR | Essentra Components | 0 | ||||
| 46111111530001 | Essentra Components | 461 QUARTER TURN | 0 | |||
| E3-1011-1159 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 1111550000VR | Essentra Components | 0 | ||||
| 26011111500 | Essentra Components | LATCH, CAM QTR TURN PADLOCKABL | 0 | |||
| E5-1-111-150 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E3-1011-115 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 47-12-111-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 1111530000VR | Essentra Components | 0 | ||||
| E3-111-156 | Southco | E3-111-156 | 0 | |||
| 90811111500 | Essentra Components | SWINGHANDLE LATCH, LIFT TURN | 0 | |||
| 47-11-111-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| E5-2-111-150 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 46111111500002 | Essentra Components | LATCH, SECURE QUARTER TURN - 5 | 0 | |||
![]() EBV Elektronik | GW JTLPS3.EM-JLJN-XX311-1-150-R33 | ams OSRAM Group | (Alt: Q65113A9017) RoHS : Compliant | 0 | ||
![]() Master Electronics | FW-02-03-LM-D-211-115 | Samtec Inc | RoHS : Compliant |
| 0 | |
| FW-02-03-F-D-111-155 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 05111152674 | 3M Interconnect | PVCJACKET/RC/WSHIELD/1.50W RoHS : Compliant |
| 0 | ||
| 05111153402 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 113011-1157C | ITT Interconnect Solutions | CIRCULAR RoHS : Not Compliant |
| 0 | ||
| MSTB-2.55-ST-WTECA-111-115 | Phoenix Contact | MSTB 2.5/5-ST W/TECA (111-115) RoHS : Compliant |
| 0 | ||
| VLS8420-0015-111-1570 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| MTMM-111-15-F-S-005 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-111-15-G-D-225 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-111-15-T-D-040 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PT8420-0040-111-1510 | TE Connectivity | PT8420-0040-111-1510 RoHS : Compliant |
| 0 | ||
| TSW-111-15-T-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-111-15-F-Q-135 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-111-15-F-Q-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-111-15-L-Q-315 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | P1-11115 | OTTO Engineering Inc | Basic / Snap Action Switches Style A Sldr Std Green Button RoHS : Compliant |
| 14 | |
| NRAS1111-15A-AA | IDEC Corporation | Circuit Breaker 15A 250 V AC 65 V DC Lever Panel Mount RoHS : Compliant |
| 0 | ||
| 1111540 | Phoenix Contact | Fiber Optic Cable Assemblies FOC-LC:PA-LC:PA-OS2:D01/0.5 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W11115/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Right Angle Low Loss Cable Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male to N male right angle low loss cable using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male right angle low loss cable using LMR-240 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to type N cable is a male to male coax assembly, PE3W11115/HS, can also be known as a low loss reverse polarity SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W11115/HS is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11115/HS can also be used in the other direction and will be right angle type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male right angle low loss cable using LMR-240 coax with heatshrink. | 2,509 | ||
| PE3W11115/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male to N male right angle low loss cable 24 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male right angle low loss cable 24 inch length using LMR-240 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle N type cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to type N cable is a male to male coax assembly, PE3W11115/HS-24, can also be known as a low loss reverse polarity SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W11115/HS-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11115/HS-24 can also be used in the other direction and will be right angle type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male right angle low loss cable 24 inch length using LMR-240 coax with heatshrink. |
| 524 | ||
| PE3W11115/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Reverse Polarity SMA Male to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male to N male right angle low loss cable 48 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male right angle low loss cable 48 inch length using LMR-240 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to type N cable is a male to male coax assembly, PE3W11115/HS-48, can also be known as a low loss reverse polarity SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W11115/HS-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11115/HS-48 can also be used in the other direction and will be right angle type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male right angle low loss cable 48 inch length using LMR-240 coax with heatshrink. |
| 524 | ||
| PE3W11115/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Male to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male to N male right angle low loss cable 12 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male right angle low loss cable 12 inch length using LMR-240 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to N type cable is a male to male coax assembly, PE3W11115/HS-12, can also be known as a low loss reverse polarity SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W11115/HS-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11115/HS-12 can also be used in the other direction and will be right angle type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male right angle low loss cable 12 inch length using LMR-240 coax with heatshrink. |
| 524 | ||
| PE3W11115/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Male to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male to N male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle N type cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to N type cable is a male to male coax assembly, PE3W11115/HS-36, can also be known as a low loss reverse polarity SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W11115/HS-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11115/HS-36 can also be used in the other direction and will be right angle type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink. |
| 524 | ||
| PE3W11115/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male to N male right angle low loss cable 60 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male right angle low loss cable 60 inch length using LMR-240 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle N type cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to type N cable is a male to male coax assembly, PE3W11115/HS-60, can also be known as a low loss reverse polarity SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W11115/HS-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11115/HS-60 can also be used in the other direction and will be right angle N type male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male right angle low loss cable 60 inch length using LMR-240 coax with heatshrink. |
| 413 | ||
| PE3C11115-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female Bulkhead to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11115-60 low loss type N female bulkhead to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11115-60 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11115-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our bulkhead type N female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11115-60 type N jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11115-60 can also be used in the other direction and will be a TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11115-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11115-12 low loss type N female bulkhead to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11115-12 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11115-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our bulkhead type N female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11115-12 type N jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11115-12 can also be used in the other direction and will be a TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W11115 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Right Angle Cable Using LMR-240 Coax. PE3W11115 is a reverse polarity SMA male to N male right angle cable using LMR-240 coax. This Pasternack reverse polarity SMA male to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11115 SMA reverse polarity male to N male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C11115-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11115-24 low loss type N female bulkhead to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11115-24 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11115-24 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our bulkhead type N female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11115-24 type N jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11115-24 can also be used in the other direction and will be a TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11115-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to TNC Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11115-48 low loss type N female bulkhead to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11115-48 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11115-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our bulkhead type N female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11115-48 type N jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11115-48 can also be used in the other direction and will be a TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11115-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11115-36 low loss type N female bulkhead to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11115-36 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11115-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our bulkhead type N female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11115-36 type N jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11115-36 can also be used in the other direction and will be a TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11115 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Low Loss Cable Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11115 low loss type N female bulkhead to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11115 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11115 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our bulkhead type N female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11115 type N jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C11115 can also be used in the other direction and will be a TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. | 0 | |||
| PE3W11115LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Right Angle Cable Using LMR-240 Coax with HeatShrink, LF Solder. PE3W11115LF/HS is a reverse polarity SMA male to N male right angle cable using LMR-240 coax. This Pasternack reverse polarity SMA male to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11115LF/HS SMA reverse polarity male to N male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | BZT52H-B11,115![]() | Nexperia | RoHS : Compliant | 50,000 | ||
BZB984-C11,115![]() | Nexperia | RoHS : Compliant | 42,000 | |||
| BZX585-B11.115 | NXP Semiconductors | 41,300 | ||||
BZT52H-C11,115![]() | Nexperia | RoHS : Compliant | 38,850 | |||
BZB784-C11,115![]() | Nexperia | RoHS : Compliant | 28,600 | |||
| 74AUP1G08GM/S711,115 | NXP Semiconductors | 20,050 | ||||
BZV90-C11,115![]() | Nexperia | RoHS : Compliant | 18,450 | |||
| BZV55-B11+115 | NXP Semiconductors | 12,500 | ||||
BZV55-C11,115![]() | Nexperia | RoHS : Compliant | 7,000 | |||
| BZV55-B11.115 | NXP Semiconductors | 6,000 | ||||
| BZX384-B11,115/BKN | NXP Semiconductors | 5,950 | ||||
| BZX84JB11115 | NXP Semiconductors | 4,550 | ||||
BZX585-C11,115![]() | Nexperia | RoHS : Compliant | 3,200 | |||
BZX284-C11,115![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 5%, 0.4W, Silicon, Unidirectional RoHS : Compliant | 660 | |||
| 1011115 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 98 | |||
![]() Waytek, Inc. | T150R0X2 111-15200 | HellermannTyton | HellermannTyton T150R0X2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 15.4" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 5,450 | |
| T150L0X2 111-15405 | HellermannTyton | HellermannTyton T150L0X2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 32.3" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 1,775 | ||
| T150L9X2 111-15419 | HellermannTyton | HellermannTyton T150L9X2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 32" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 1,450 | ||
| T150XL0X2 111-15500 | HellermannTyton | HellermannTyton T150XL0X2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 43" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 475 | ||
![]() Win Source Electronics | 209311-1115 | Molex | 209311-1115 Molex Board to Board & Mezzanine Connectors Mirror Mezz Assy 2.5mm 15Px11R .76Au datasheet, inventory, & pricing. |
| 2,500 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |