1048L-100CWC Price, Reseller, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to MC-Card Plug Cable 48 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to MC-Card plug cable 48 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MC-Card plug cable 48 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MC-Card cable connection on the other. Our SMA to MC-Card cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MC-Card cable is a male to plug coax assembly, PE36110-48, can also be known as a SMA plug to MC-Card male cable assembly and will be shipped same-day as it is purchased. SMA plug to MC-Card male cable assembly PE36110-48 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to MC-Card plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36110-48 can also be used in the other direction and will be MC-Card plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MC-Card male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MC-Card cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MC-Card plug cable 48 inch length using RG178 coax.

1 : $78.19
25 : $74.28
50 : $70.37
100 : $67.24

PE3CA1048-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141EAM, RF Cable Type: PE-141FLEX, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Male Right Angle Cable 100 cm Length Using PE-141FLEX Coax, RoHS., Radio frequency assembly N male to N male right angle cable 100 cm length using PE-141FLEX coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 100 cm length using PE-141FLEX coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3CA1048-100CM, can also be known as a type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3CA1048-100CM is built with PE-141FLEX which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency N type male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1048-100CM can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 100 cm length using PE-141FLEX coax, RoHS.

1 : $132.99
25 : $126.34
50 : $119.69

PE3M0410-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Socket to MIL Size 8 Contact Socket Cable 48 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0410-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0410-48 in-series RF cable has 0.78 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0410-48 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE70A1048S

Pasternack Enterprises

Key Specifications, Design: Step, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 11 dB. 0 to 11 dB Push Button Step Attenuator, SMA Female to SMA Female with 1 dB Step Rated to 5 Watts Up to 3 GHz., PE70A1048S is a push button step attenuator from Pasternack. This threaded SMA step attenuator is constructed to precise RF and microwave industry specifications and operates at a maximum frequency of 3 GHz. Our in-series bidirectional step RF attenuator has a maximum attenuation value of 11 dB with a 1 dB step size. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this attenuator is 5 Watts. This bidirectional SMA step attenuator from Pasternack has a female gender for in and out ports. Our PE70A1048S in-series RF attenuator comes with a 50 Ohm impedance. This 11 dB radio frequency attenuator with SMA connectors is constructed with aluminum body material and has a gold-plated beryllium copper inner conductor. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our in-series passive RF attenuator can operate at temperatures ranging from -20 to 85 deg C. The 11 dB attenuator from Pasternack has a brass connector built with gold plating. Our PE70A1048S bidirectional step attenuator has a maximum input VSWR of 1.5:1. This SMA female step attenuator has a length of 4.17 inches, a width of 1.4 inches, and a weight of 1 lbs. This Pasternack push button step attenuator will ship the same business day as purchased. Our SMA female radio frequency attenuator is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal step attenuator as per your requirements.

1 : $410.99
5 : $402.77
10 : $394.55
25 : $386.33

PE3C1048/HS/PH90

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to MCX Plug Right Angle Cable Using RG316 Coax with HeatShrink and 90 Deg. Clock. PE3C1048/HS/PH90 is a SMB plug right angle to MCX plug right angle cable using RG316 coax. This Pasternack SMB plug right angle to MCX plug right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm MCX for connector 2. SMB right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1048/HS/PH90 SMB plug right angle to MCX plug right angle cable assembly is constructed with RG316 coax.

PE3C9310-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 48 inch length using LMR-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9310-48 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9310-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9310-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9310-48 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3W00010-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to N Male Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to N male cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our a SMA to a type N cable assembly has male gender on end 1 and male on end 2. PE3W00010-48 can also be known as a SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W00010-48 RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. SMA plug to type N plug cable assembly PE3W00010-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00010-48 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W10487LF/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to SSMB Plug Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly N female bulkhead to SSMB plug low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SSMB plug low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SSMB cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and SSMB cable connection on the other. Our low loss type N to SSMB cable assemblies have a female gender on end 1 and plug on end 2. PE3W10487LF/HS-36 can also be known as a low loss N type jack to SSMB male cable assembly and will be shipped same-day as it is purchased. Type N jack to SSMB male cable assembly PE3W10487LF/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SSMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type female bulkhead to SSMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10487LF/HS-36 can also be used in the other direction and will be SSMB plug to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SSMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SSMB cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SSMB plug low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

PE3W01048LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50. UHF Male to Mini UHF Female Cable Using RG142 Coax, RoHS. PE3W01048LF/HS is a UHF male to Mini UHF female cable using RG142 coax. This Pasternack UHF male to Mini UHF female cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male UHF to female Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01048LF/HS UHF male to Mini UHF female cable assembly is constructed with RG142 coax.

PE3W10486

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C600, RF Cable Type: PE-C600, RF Cable Impedance: 50 Ohm. 4.3-10 Male to TNC Male Cable Using PE-C600 Coax. PE3W10486 is a 4.3-10 male to TNC male cable using PE-C600 coax. This Pasternack 4.3-10 male to TNC male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm TNC for connector 2. Our male 4.3-10 to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10486 4.3-10 male to TNC male cable assembly is constructed with PE-C600 coax.

PE3W21048LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to Reverse Polarity BNC Male Cable Using RG402 Coax, LF Solder. PE3W21048LF is a SMA female 2 hole flange to reverse polarity BNC male cable using RG402 coax. This Pasternack SMA female 2 hole flange to reverse polarity BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA 2 hole flange to reverse polarity male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W21048LF SMA female 2 hole flange to BNC reverse polarity male cable assembly is constructed with RG402 coax.

PE3W10489

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to Snap-On MMBX Plug Right Angle Cable Using RG196 Coax. PE3W10489 is a SMA female bulkhead to MMBX plug right angle cable using RG196 coax. This Pasternack SMA female bulkhead to MMBX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMBX for connector 2. SMA to MMBX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA bulkhead to plug MMBX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10489 SMA female bulkhead to MMBX plug right angle cable assembly is constructed with RG196 coax.

PE3W10485

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. 3.5mm Male to 1.0/2.3 Jack Bulkhead Cable Using PE-SR405FL Coax. PE3W10485 is a 3.5mm male to 1.0/2.3 jack bulkhead cable using PE-SR405FL coax. This Pasternack 3.5mm male to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our male 3.5mm to jack 1.0/2.3 bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W10485 3.5mm male to 1.0/2.3 jack bulkhead cable assembly is constructed with PE-SR405FL coax.

PE36910-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male Right Angle to N Male Right Angle Cable 48 Inch Length Using PE-C195 Coax., Radio frequency assembly N male right angle to N male right angle cable 48 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male right angle to N male right angle cable 48 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle N type cable connection on the other. Our low loss right angle type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE36910-48, can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE36910-48 is built with PE-C195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male right angle cable 48 inch length using PE-C195 coax.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

Relay Specialties

281XDX110-48DC

Schneider Electric Relays

MAGNECRAFT ICE CUBE STYLE RELA

1 : $11.19
5 : $10.78
10 : $10.03

TE Connectivity

8-61048-1

TE Connectivity

RECEPT,PIDG FASTON 22-18 110 Quick Disconnect Terminal Type: Receptacle Insulation Option: Partially Insulated Wire Size: 22 – 18 AWG Wire Size: .26 – .96 mm² Wire Size: 509 – 1900 CMA Receptacle Partially Insulated 22 – 18 AWG .26 – .96 mm² | Quick Disconnect | Part Number: 8-61048-1 | Internal Number: 8-61048-1 | TE Connectivity
RoHS : Compliant

2,500 : $1.08
1,000 : $1.11
500 : $1.14
250 : $1.17
100 : $1.2
50 : $1.23
25 : $1.26
10 : $1.29
1 : $1.32

4,995

61048-1

TE Connectivity

RECEPT,PIDG FASTON 22-18 110 Quick Disconnect Terminal Type: Receptacle Insulation Option: Partially Insulated Wire Size: 22 – 18 AWG Wire Size: .26 – .96 mm² Wire Size: 509 – 1900 CMA Receptacle Partially Insulated 22 – 18 AWG .26 – .96 mm² | Quick Disconnect | Part Number: 61048-1 | Internal Number: 61048-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.92
1,000 : $0.94
500 : $0.97
250 : $0.99
100 : $1.02
50 : $1.04
25 : $1.07
10 : $1.09
1 : $1.11

2,367

5-104809-4

TE Connectivity

05 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 5 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 5 | PCB Header & Receptacle | Part Number: 5-104809-4 | Internal Number: 5-104809-4 | TE Connectivity
RoHS : Compliant

2,500 : $2.68
1,000 : $2.76
500 : $2.83
250 : $2.9
100 : $2.97
50 : $3.05
25 : $3.12
10 : $3.19
1 : $3.26

1,964

5-104893-2

TE Connectivity

20 50/50 GRID CABLE RECPT LF Part Number: 5-104893-2 | Internal Number: 5-104893-2 | TE Connectivity
RoHS : Compliant

1,000 : $12.57
500 : $12.95
250 : $13.33
100 : $13.71
50 : $14.1
25 : $14.48
10 : $14.86
1 : $15.24

1,492

5-104809-3

TE Connectivity

04 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 4 | PCB Header & Receptacle | Part Number: 5-104809-3 | Internal Number: 5-104809-3 | TE Connectivity
RoHS : Compliant

2,500 : $1.87
1,000 : $1.92
500 : $1.97
250 : $2.02
100 : $2.07
50 : $2.12
25 : $2.17
10 : $2.23
1 : $2.28

812

PT571048

TE Connectivity

PT571048 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 4 Form C 4PDT-CO Contact Current Rating: 6 A General Purpose Power Relay DC Monostable 4 Form C 4PDT-CO | Electromechanical Relay | Part Number: PT571048 | Internal Number: 9-1419111-4 | TE Connectivity
RoHS : Compliant

100 : $20.73
50 : $21.72
25 : $22.7
10 : $23.68
1 : $24.67

800

5-104894-5

TE Connectivity

50 50/50 GRID RA HDR LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 50 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 5-104894-5 | Internal Number: 5-104894-5 | TE Connectivity
RoHS : Compliant

1,000 : $14.98
500 : $15.43
250 : $15.89
100 : $16.34
50 : $16.8
25 : $17.25
10 : $17.7
1 : $18.16

754

RP821048

TE Connectivity

RP821048 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 8 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: RP821048 | Internal Number: 1393845-6 | TE Connectivity
RoHS : Compliant

250 : $106.82
100 : $111.11
50 : $115.39
25 : $119.65
10 : $123.93
1 : $128.19

622

T1610482140-000

TE Connectivity

H48B-SGR-LB-M40 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1610482140-000 | Internal Number: T1610482140-000 | TE Connectivity
RoHS : Compliant

1 : $99.44

T1310480142-000

TE Connectivity

H48B-TS-RO-PG42 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1310480142-000 | Internal Number: T1310480142-000 | TE Connectivity
RoHS : Compliant

10 : $54.27
1 : $60.31

T1310480136-000

TE Connectivity

H48B-TS-RO-PG36 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1310480136-000 | Internal Number: T1310480136-000 | TE Connectivity
RoHS : Compliant

25 : $52.26
10 : $56.28
1 : $60.31

T1310480129-000

TE Connectivity

H48B-TS-RO-PG29 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1310480129-000 | Internal Number: T1310480129-000 | TE Connectivity
RoHS : Compliant

25 : $52.26
10 : $56.28
1 : $60.31

T1310480132-000

TE Connectivity

H48B-TS-RO-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1310480132-000 | Internal Number: T1310480132-000 | TE Connectivity
RoHS : Compliant

10 : $54.27
1 : $60.31

T1310480125-000

TE Connectivity

H48B-TS-RO-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1310480125-000 | Internal Number: T1310480125-000 | TE Connectivity
RoHS : Compliant

10 : $51.69
1 : $57.43

T1310480140-000

TE Connectivity

H48B-TS-RO-M40 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1310480140-000 | Internal Number: T1310480140-000 | TE Connectivity
RoHS : Compliant

10 : $59.7
1 : $66.34

Venkel Ltd.

CRN10-4-822JT

VENKEL LTD

Chip Resistor Array;CRN10;4;8.2K;�5%;Convex
RoHS : Compliant

10,000

CRN10-4-820JT

VENKEL LTD

Chip Resistor Array;CRN10;4;82R;�5%;Convex
RoHS : Compliant

Waytek, Inc.

T50R0C2 111-04878

HellermannTyton

HellermannTyton T50R0C22 standard cable tie is a self-locking nylon tie with a 8" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

100 : $0.0742
200 : $0.0681
500 : $0.0623
1,000 : $0.0572
5,000 : $0.0545

423,200

57480 OR 611-048

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #48 Band 1/2" 1-1/2" TO 3-1/2"

10 : $2.0303
50 : $1.8048
100 : $1.6377
200 : $1.5875
500 : $1.529
1,000 : $1.4705

780

Win Source Electronics

TLV61048DBV

Texas Instruments

Boost Converter 14V 1.8A SOT-23-6

2,655 : $0.1132
1,985 : $0.1262
1,535 : $0.1306
1,115 : $0.1349
720 : $0.1393
295 : $0.1697

60,000

TLV61048DBVT

Texas Instruments

IC REG BOOST ADJ SOT23-6 / Boost Switching Regulator IC Positive Adjustable 3.3V 1 Output SOT-23-6
RoHS : Compliant

2,825 : $0.1063
2,265 : $0.1106
1,745 : $0.1149
1,215 : $0.1236
785 : $0.1279
370 : $0.1365

57,400

TLV61048DBVR

Texas Instruments

IC REG BOOST ADJ SOT23-6
RoHS : Compliant

2,825 : $0.1063
2,265 : $0.1106
1,745 : $0.1149
1,215 : $0.1236
785 : $0.1279
370 : $0.1365

54,370

TCAN1048AVDMTRQ1

Texas Instruments

IC TRANSCEIVER HALF 2/2 14VSON
RoHS : Compliant

124 : $2.4313
93 : $2.7119
72 : $2.8054
52 : $2.8989
34 : $2.9924
14 : $3.647

21,000

TJA1048TK

Nexperia

295 : $1.152
235 : $1.2
180 : $1.248
125 : $1.344
85 : $1.3919
40 : $1.4879

16,000

DSLVDS1048PWT

Texas Instruments

IC RECEIVER 0/4 16TSSOP / 0/4 Receiver LVDS 16-TSSOP
RoHS : Compliant

82 : $3.671
62 : $4.0946
48 : $4.2358
35 : $4.377
23 : $4.5182
10 : $5.5065

7,245

DSLVDS1048PWR

Texas Instruments

IC RECEIVER FULL 0/4 16TSSOP / 0/4 Receiver Full LVDS 16-TSSOP
RoHS : Compliant

51 : $5.9542
38 : $6.6413
30 : $6.8703
22 : $7.0993
14 : $7.3283
6 : $8.9313

7,070

SRU1048-100Y

Bourns Inc

RoHS : Compliant

955 : $0.3152
715 : $0.3516
550 : $0.3637
400 : $0.3758
260 : $0.3879
110 : $0.4728

6,400

BP1048B2

OSRAM Opto Semiconductors

Photodiode 850nm 5mm Radial

216 : $1.3894
162 : $1.5497
125 : $1.6031
91 : $1.6565
59 : $1.71
24 : $2.084

3,164

TJA1048T

Nexperia

3V~5V 5Mbps SOIC-14 Drivers, Receivers, Transceivers RoHS

172 : $1.9559
129 : $2.1815
100 : $2.2568
73 : $2.332
47 : $2.4072
20 : $2.9338

3,105

FIN1048MX

Fairchild Semiconductor Corporation

IC RCVR QUAD 3.3V HS LVDS 16SOIC
RoHS : Compliant

146 : $2.0642
109 : $2.3023
84 : $2.3817
61 : $2.4611
40 : $2.5405
17 : $3.0962

2,416

W.FL-R-SMT-1(10)/CL331-0482-6

Hirose Electric Co Ltd

400 : $0.844
300 : $0.9415
230 : $0.974
170 : $1.0064
110 : $1.0389
45 : $1.266

1,640

ZDT1048TA

Diodes Incorporated

TRANS 2NPN 17.5V 5A SM8
RoHS : Compliant

226 : $1.329
169 : $1.4824
131 : $1.5335
95 : $1.5846
62 : $1.6357
26 : $1.9935

1,132

Wuhan P&S

F339X131048MFP2B0

Vishay Intertechnologies

Interference Suppression Film Capacitor - Class X1 Radial MKP 480 VAC, 10000pF, ��20%
RoHS : Compliant

1 : $0.48
100 : $0.17
500 : $0.13
1,000 : $0.12

10,000

1048L-100CWC Reseller

Enlace URL