| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
1037/AK-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | 103741-9 | TE Connectivity | Connector: pin strips; male; data; PIN: 9; THT; straight; 2.54mm RoHS : Not Compliant |
| 839 | |
| 4-103783-0 | TE Connectivity | Connector: pin strips; male; data; PIN: 80; soldering; 3A; straight RoHS : Not Compliant |
| 415 | ||
| 2J0A02-2.4-C162G_CU010375 | 2J USA | Antenna: communication; Bluetooth,WiFi; 2dBi; twist-on; 2.4GHz |
| 215 | ||
| 10-18-1037 | Molex | Connector: wire-wire/PCB; data; Inom: 5A; 250V; PIN: 3; 5.03mm; black RoHS : Compliant |
| 134 | ||
| 10370 | Wiha Quality Tools | Screwdriver bit: Torx®; TX06; 1/4"; Overall len: 70mm |
| 105 | ||
| 10370 | HELUKABEL | Wire; JZ-500-BK; JZ; 18G1.5mm2; unshielded; 300V,500V; Cu; stranded RoHS : Compliant |
| 30 | ||
| 1203411037 | Molex | Cable: for sensors; M12; M12 male; shielded,straight; TPU; IP67 RoHS : Compliant |
| 28 | ||
| 087-1-037-0-F-XS0-1080 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; straight RoHS : Compliant |
| 0 | ||
| 088-1-037-0-F-XS0-1080 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; angled; 1x37 RoHS : Compliant |
| 0 | ||
| 089-1-037-0-S-XS0-2900 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; straight RoHS : Compliant |
| 0 | ||
| 089-1-037-0-T-XS0-1980 | MPE-Garry GmbH | Connector: pin strips; socket; male; data; PIN: 37; THT; straight RoHS : Compliant |
| 0 | ||
| 1037085 | Phoenix Contact | Splice terminal: rail; PTS; PA; terminals: 2; W: 5.2mm; H: 49mm RoHS : Compliant |
| 0 | ||
| 1037720000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; 24A; 800V; screw,screw terminal; wemid RoHS : Compliant |
| 0 | ||
| 110.37-K-M | Pneumatic Components Limited (PCL) | Manometer; 0÷25bar; bottom connection; Thread: M10x1; 40mm |
| 0 | ||
| 3-103-703 | Schurter Electronic Components | Filter: anti-interference; single-phase; 250VAC; 250VDC; 12mΩ RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 4-103783-0-POS | TE Connectivity | 80 MODII HDR DRST B/A .100CL - Bulk (Alt: 4-103783-0-POS) RoHS : Not Compliant |
| 83,780 | |
| 4-103741-0-POS | TE Connectivity | 40 MODII HDR SRST B/A .100CL - Bulk (Alt: 4-103741-0-POS) RoHS : Not Compliant |
| 41,219 | ||
| ECS-160-10-37B2-RWM-TR | ECS International Inc | Crystal 16MHz 10pF 4-Pin SMD ECX-1637B2 T/R - Tape and Reel (Alt: ECS-160-10-37B2-RWM-TR) RoHS : Compliant |
| 21,000 | ||
| 5-103735-3 | TE Connectivity | - Rail/Tube (Alt: 5-103735-3) RoHS : Compliant |
| 5,820 | ||
| CRCW1210374RFKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW1210374RFKEA) RoHS : Compliant |
| 5,000 | ||
| 5-103735-2 | TE Connectivity | - Rail/Tube (Alt: 5-103735-2) RoHS : Compliant |
| 3,697 | ||
| 103735-2 | TE Connectivity | - Rail/Tube (Alt: 103735-2) RoHS : Not Compliant |
| 2,451 | ||
| 5-103735-4 | TE Connectivity | - Rail/Tube (Alt: 5-103735-4) RoHS : Compliant |
| 2,046 | ||
| 5-103735-1 | TE Connectivity | - Rail/Tube (Alt: 5-103735-1) RoHS : Compliant |
| 1,928 | ||
| 103735-3 | TE Connectivity | - Rail/Tube (Alt: 103735-3) RoHS : Not Compliant |
| 1,217 | ||
| 4-103747-0 | TE Connectivity | - Rail/Tube (Alt: 4-103747-0) RoHS : Not Compliant | 1,000 | |||
| 5-103735-8 | TE Connectivity | - Rail/Tube (Alt: 5-103735-8) RoHS : Compliant |
| 798 | ||
| 21-033101-037 | Amphenol Corporation | - Bulk (Alt: 21-033101-037) RoHS : Not Compliant |
| 475 | ||
| 4-103741-0 | TE Connectivity | - Bulk (Alt: 4-103741-0) RoHS : Not Compliant |
| 89 | ||
| 6-103735-1 | TE Connectivity | - Rail/Tube (Alt: 6-103735-1) RoHS : Compliant |
| 9 | ||
![]() Newark | 5-103735-1 | TE Connectivity | Wire-To-Board Connector, Ampmodu Mte Ser; |Te Connectivity Amp 5-103735-1 RoHS : Compliant |
| 2,214 | |
| 52901-0374 | Molex | Connector, Stacking, Rcpt, 30Pos, 2Row; |Molex 52901-0374 RoHS : Compliant |
| 440 | ||
| 1037710000 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Din Rail, 2Pos, 12Awg; No. Of Positions:2Positions; Wire Size Awg Min:26Awg; Wire Size Awg Max:12Awg; Conductor Area Csa:2.5Mm²; Wire Connection Method:Screw; Rated Current:24A; Rated Voltage:800V; No. Of Levels:1 Rohs Compliant: Yes RoHS : Compliant |
| 400 | ||
| 52901-0374 | Molex | Connector, Stacking, Rcpt, 30Pos, 2Row; |Molex 52901-0374 RoHS : Compliant |
| 199 | ||
| 52901-0374 | Molex | Connector, Stacking, Rcpt, 30Pos, 2Row; |Molex 52901-0374 RoHS : Compliant |
| 199 | ||
| 860010375017 | Wurth Elektronik | Cap, 1000?f, 16V, 20%; |Würth Elektronik 860010375017 RoHS : Compliant |
| 111 | ||
| 860010378023 | Wurth Elektronik | Cap, 3300?f, 16V, 20%; |Würth Elektronik 860010378023 RoHS : Compliant |
| 49 | ||
| ESW-110-37-L-D | Samtec Inc | Connector, Rcpt, 20Pos, 2Row, 2.54Mm; |Samtec, Inc. ESW-110-37-L-D RoHS : Compliant |
| 43 | ||
| FMANFP1037 | Fairview Microwave Inc | 2400-2500, 5150-7125 Mhz Wi-Fi 6E Flat P; |Fairview Microwave FMANFP1037 RoHS : Not Compliant |
| 20 | ||
| 64.1037-20024 | Stäubli Electrical Connectors | Stack 4Mm Banana Plug-Plug, Brown, 500Mm; |Staubli 64.1037-20024 RoHS : Compliant |
| 16 | ||
| 64.1037-10024 | Stäubli Electrical Connectors | Stack 4Mm Banana Plug-Plug, Violet, 1M; |Staubli 64.1037-10024 RoHS : Compliant |
| 15 | ||
| 64.1037-05024 | Stäubli Electrical Connectors | Stack 4Mm Banana Plug-Plug, White, 1M; |Staubli 64.1037-05024 RoHS : Compliant |
| 14 | ||
| FMANKIT1037 | Fairview Microwave Inc | Helium Hotspot Pro Antenna Upgrade Kit,; |Fairview Microwave FMANKIT1037 RoHS : Not Compliant |
| 5 | ||
| FMCA1037-24 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm; |Fairview Microwave FMCA1037-24 RoHS : Compliant |
| 1 | ||
| 1037 | Keystone Electronics Corp | Connector, Test Point, Through Hole; |Keystone 1037 RoHS : Compliant |
| 0 | ||
![]() RS | GGC2-1/2 (N1037634) | Mersen Electrical Power | FUSE, FAST ACTING, ELECTRONIC, GLASS/CERAMIC, 10KA, 250VAC, 2-1/2A |
| 50 | |
| 5SJ4103-7HG40 | Siemens | MINIATURE CIRCUIT BREAKER 5SJ4 1P 240V 3A SAME PH 14K C-TRIP RoHS : Compliant |
| 24 | ||
| GAB3/4 (W1037756) | Mersen Electrical Power | FUSE, MIDGET, FAST ACTING, CERAMIC, PC MOUNT, 10KA, 250VAC, 3/4A |
| 10 | ||
| C1037C-C1 | Norgren | VALVE, SOLENOID, 1-1/4", PROSPECTOR |
| 8 | ||
| GAB10 (N1037082) | Mersen Electrical Power | FUSE, MIDGET, FAST ACTING, CERAMIC, PC MOUNT, 10KA, 250VAC, 10A |
| 8 | ||
| GGC4 (Z1037644) | Mersen Electrical Power | FUSE, MIDGET, FAST ACTING, GLASS BODY, 1-1/4" X 1/4", I.R. 2, 250VAC, 4A |
| 7 | ||
| 1SNA103762R0300 (010376203) | TE Connectivity | PF13.0 END PLATE ORANGE, ENTRELEC |
| 5 | ||
| 120341-1037 | Woodhead Molex | DOUBLE ENDED CORDSET, MALE M12 TO MALE M12, SHIELDED, TPE, GREEN, 20M LENGTH |
| 4 | ||
| C1037C-P1 | Norgren | VALVE, SOLENOID, 3/2, 1-1/4", PROSPECTOR |
| 2 | ||
| GAB1 (X1037757) | Mersen Electrical Power | FUSE, MIDGET, FAST ACTING, CERAMIC, PC MOUNT, 10KA, 250VAC, 1A |
| 1 | ||
| DFS60B-S4AK05000 (1037218) | SICK AG | INCREMENTAL ENCODER, 5, 000 PPR, 10 X 19MM DIA.SHAFT, 4.5-5.5 V, 1.5 M CABLE |
| 1 | ||
| 1037 | Lincoln Industrial Corporation | GUN, LEVER |
| 0 | ||
| 1037 | Adafruit Industries | ADAFRUIT PIBOW - ENCLOSURE FOR RASPBERRY PI MODEL B COMPUTERS |
| 0 | ||
| 1037 | RACO | KNOCKOUT SEAL 2-1/2" 2PC STEEL |
| 0 | ||
| 1037 | Keystone Electronics Corp | PC SLOTTED TEST POINT, THRU-HOLE MOUNT, TIN PLATE, BRASS RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | DSC1001CE1-037.1250![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50PPM, 1.8-3.3V, -20 to 70C, 3.2 x 2.5mm, VDFN, Projected EOL: 2040-11-24 RoHS : Compliant |
| 400 | |
| DSC1001CE1-037.1250T | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50PPM, 1.8-3.3V, -20 to 70C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-02-12 RoHS : Compliant |
| 400 | ||
| B10377 | Microchip Technology Inc | MOST25 oPHY 2+0 PhyPlus OS81060, Projected EOL: - Contact for Pricing | 0 | |||
| B10378 | Microchip Technology Inc | MOST25 oPHY 2+0 PhyPlus OS81050, Projected EOL: - Contact for Pricing | 0 | |||
| B10379 | Microchip Technology Inc | MOST50 ePHY Plus OS81082, Projected EOL: - Contact for Pricing | 0 | |||
| 5962-2221037QZC | Microchip Technology Inc | RTPF500ZT-LG1509B, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| DSC1001DI1-037.1250 | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50ppm, 1.8-3.3V, -40 to 85C, 2.5x2.0mm, VDFN, Projected EOL: 2051-09-30 RoHS : Compliant |
| 0 | ||
| DSC1001DL1-037.1250 | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-08-12 RoHS : Compliant |
| 0 | ||
| VXM9-1037-26M0000000 | Microchip Technology Inc | Crystal Oscillator, 2.0x1.6mm, -40C to +125C, 20ppm, 26MHz, UDFN, Projected EOL: 2050-11-24 RoHS : Compliant |
| 0 | ||
| DSC1001DL1-037.1250T | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2051-09-12 RoHS : Compliant |
| 0 | ||
| DSC1001DI1-037.1250T | Microchip Technology Inc | MEMS OSC, LVCMOS, 37.125MHz, 50ppm, 1.8-3.3V, -40 to 85C, 2.5x2.0mm, VDFN, Projected EOL: 2051-09-30 RoHS : Compliant |
| 0 | ||
| VXM9-1037-26M0000000TR | Microchip Technology Inc | Crystal Oscillator, 2.0x1.6mm, -40C to +125C, 20ppm, 26MHz, UDFN, Projected EOL: 2050-11-24 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 1037 | Keystone Electronics Corp | RoHS : Compliant | 6,862 | ||
| FW-0171-0375-032-NY-NAT | WASHERS | 1,080 | ||||
| 5710-376-16P | Seastrom Mfg | 888 | ||||
| 1103747 | Unbrako Group | 550 | ||||
| 1037 | Zierick Manufacturing Corporation | 450 | ||||
| 5103-75SPPB | Rotor Clip Company Inc | 407 | ||||
| 5191037 | Seastrom Mfg | 337 | ||||
| 5610-375R-62 | Seastrom Mfg | 150 | ||||
| BR6981-0.375-34 | Lyn-Tron Inc | 136 | ||||
| RAY-103-7.5(100) | TE Connectivity | RoHS : Compliant | 100 | |||
| 1037-125-SS-26 | RAF Electronic Hardware | 74 | ||||
| BS10379-3A | MISC. INDUSTRIAL HRD | 15 | ||||
| BR6981-0.375-00 | Lyn-Tron Inc | 14 | ||||
| CA21037CL-4R | Alcoa Fastening Systems Aerospace | 11 | ||||
| S2210371-6A011 | MISC. BEARINGS/BUSHINGS | 10 | ||||
![]() Rochester Electronics | JM38510/37701BEA![]() | Texas Instruments | ALS Series, Inverted Output, TTL, CDIP16 RoHS : Not Compliant |
| 50 | |
JM38510/37101B2A![]() | Texas Instruments | D Flip-Flop, ALS Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, TTL, CQCC20 RoHS : Not Compliant |
| 164 | ||
JM38510/37002B2A![]() | Texas Instruments | NAND Gate, ALS Series, 3-Func, 3-Input, TTL, CQCC20 RoHS : Not Compliant |
| 12 | ||
JM38510/37201BEA![]() | Texas Instruments | D Flip-Flop, ALS Series, 6-Func, Positive Edge Triggered, 6-Bit, True Output, TTL, CDIP16 RoHS : Not Compliant |
| 194 | ||
JM38510/37001B2A![]() | Texas Instruments | NAND Gate, ALS Series, 4-Func, 2-Input, TTL, PQCC20 RoHS : Not Compliant |
| 5 | ||
JM38510/37004BCA![]() | Texas Instruments | NAND Gate, ALS Series, 1-Func, 8-Input, TTL, CDIP14 RoHS : Not Compliant |
| 21 | ||
LT1037ACP![]() | Texas Instruments | Operational Amplifier, 1 Func, 50uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant |
| 6,247 | ||
| JM38510/37201B2A | National Semiconductor Corporation | D Flip-Flop, ALS Series, 6-Func, Positive Edge Triggered, 6-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant |
| 10 | ||
| R5F10377ANA#U5 | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PQCC24 RoHS : Compliant |
| 25,066 | ||
| R5F10377ANA#W5 | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PQCC24 RoHS : Compliant |
| 10,000 | ||
R5F10377DNA#U0![]() | Renesas Electronics Corporation | RL78/G12 - Compact, Low Power Microcontrollers for General Purpose Applications Ideal for Sub-MCUs RoHS : Compliant |
| 704 | ||
| R5F10378ANA#U5 | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PQCC24 RoHS : Compliant |
| 9,049 | ||
R5F1037AANA#U0![]() | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PQCC24 RoHS : Compliant |
| 1,000 | ||
R5F1037ADNA#U0![]() | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PQCC24 RoHS : Compliant |
| 5 | ||
| R5F1037ADNA#U5 | Renesas Electronics Corporation | Microcontroller, 16-Bit, FLASH, RL78 CPU, 24MHz, CMOS, PQCC24 RoHS : Compliant |
| 2,092 | ||
![]() Sager | 1037 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding RFSB,W,5.4 | 0 | ||
| 1037 | Keystone Electronics Corp | Test Plugs & Test Jacks PCB TEST POINT RoHS : Compliant |
| 0 | ||
| RF179-72SP1-72SP1-0373 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| 1-103735-4 | TE Connectivity | Headers & Wire Housings 15 MTE HDR SRST LATCH .100CL RoHS : Not Compliant | 0 | |||
| ASP-210378-01 | Samtec Inc | Board to Board & Mezzanine Connectors | 0 | |||
| 2157591037 | Molex | MICROFIT+ SR RCPT 7CKT POL-D BLUE RoHS : Compliant |
| 0 | ||
| 3241037 | Phoenix Contact | Terminal Block Tools & Accessories WP-G BRASS IP40 PG7 RoHS : Compliant | 0 | |||
| 468-10372-001 | Carling Technologies | Switch Actuators VVPZC4J-1HX | 0 | |||
| 5-103765-3 | TE Connectivity | Headers & Wire Housings HDR RA 1X03P .1 230/090 30AU RoHS : Compliant |
| 0 | ||
| 2842103-7 | TE Connectivity | TE Connectivity 7P,2MM,BRK HDR,SRVT,SMD,0.38AU,TR W/CAP RoHS : Compliant | 0 | |||
| 103777-8 | TE Connectivity | Headers & Wire Housings 16 MODII HDR DRST B/A .100CL RoHS : Not Compliant | 0 | |||
| 1210370059 | Molex | Circular DIN Connectors CONN. DIN FORMA B IND.H12 | 0 | |||
| 8516-0103-72 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9895721037 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9736011037 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Ameya Holding Limited | 2SA1037AKT146R![]() | ROHM Semiconductor | General Purpose Amplification Transistor RoHS : Compliant |
| 21,000 | |
2SA1037AKT146Q![]() | ROHM Semiconductor | General Purpose Amplification Transistor RoHS : Compliant |
| 8,850 | ||
| SKYA21037 | Skyworks Solutions Inc | 6,037 | ||||
![]() ComSIT USA | 2SA1037AKT146R![]() | ROHM Semiconductor | General purpose Transistor (-50V, -150 milli Amp) Small Signal Bipolar Transistor, 0.15A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant | 12,000 | ||
| KX1221037 | Kionix Inc | +/- 2G / 4G / 8G TRI-AXIS DIGITAL ACCELEROMETER SPECIFICATIONS Analog Circuit, 1 Func, PBGA12 RoHS : Compliant | 10,000 | |||
| 532610371 | Molex | Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, Surface Mount Terminal RoHS : Compliant | 3,000 | |||
| 51037351 | TE Connectivity | HDR ASSY, VERT, SINGLE ROW 2.54[.100] CL, .064[.025] SQ POST, WITH PLZN & LATCHING, AMPMODU MTE Board Connector, 2 Contact(s), 1 Row(s), Male, Straight, Solder Terminal, Black Insulator RoHS : Compliant | 307 | |||
| 51037352 | TE Connectivity | HDR ASSY, VERT, SINGLE ROW 2.54[.100] CL, .064[.025] SQ POST, WITH PLZN & LATCHING, AMPMODU MTE Board Connector, 3 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Latch, Black Insulator, Plug RoHS : Compliant | 255 | |||
| 111037031 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant | 80 | |||
| UPD71037CZ10 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 50 | |||
![]() Interstate Connecting Components | 351-1037-000 | ITT Interconnect Solutions | 3511037000 | 0 | ||
| 5-103765-3 | TE Connectivity | 03 MODII HD SRRA B/A .100CL,LF RoHS : Compliant |
| 0 | ||
| 10-37253-18G3 | Glenair Inc | 0 | ||||
| 801-037-01M7-10PC | Glenair Inc | 0 | ||||
| 801-037-01M9-19PB | Glenair Inc | 0 | ||||
| 801-037-01NF6-4AA | Glenair Inc | 0 | ||||
| 801-037-01NF6-7PC | Glenair Inc | 0 | ||||
| 801-037-01NF7-10PB | Glenair Inc | 0 | ||||
| 801-037-01ZN6-4SC | Glenair Inc | 0 | ||||
| 801-037-02C6-7BA | Glenair Inc | 0 | ||||
| 801-037-02NF6-4PA | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-037-02NF6-7BB | Glenair Inc | 0 | ||||
| 801-037-02NF7-10BA | Glenair Inc | RoHS : Unknown | 0 | |||
| 801-037-02ZNU6-7AD | Glenair Inc | 0 | ||||
| 801-037-02ZNU7-10BB | Glenair Inc | 0 | ||||
![]() PEI Genesis | M85049/10-37N | Amphenol PCD |
| 0 | ||
| M85049/10-37N | SOURIAU-SUNBANK |
| 0 | |||
| SCE2-B-76A10-37SD-001 | Amphenol Limited |
| 0 | |||
| SCE2-B-L1K10-37PB-985 | Amphenol Limited |
| 0 | |||
| 21-033321-037 | Amphenol Corporation |
| 0 | |||
| 106-10370 | SUMITOMO ELECTRIC Interconnect Products |
| 0 | |||
| SCE2-B-L1K10-37PC-985 | Amphenol Limited |
| 0 | |||
| SE20CR1037AL12 | SOURIAU-SUNBANK |
| 0 | |||
| C10-372 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| SCE2-B-76A10-37SD-002 | Amphenol Limited |
| 0 | |||
| TP1037S | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 1037-4GW24 | HellermannTyton |
| 0 | |||
| SCE2-B-07A10-37PD-002 | Amphenol Limited |
| 0 | |||
| 160X10379X | Amphenol Corporation |
| 0 | |||
| 1037-4HW8 | HellermannTyton |
| 0 | |||
![]() Chip 1 Exchange | 53261-0371 | Molex | INSTOCK RoHS : Compliant | 323,710 | ||
| 505110-3791 | Molex | INSTOCK | 23,400 | |||
| 2SA1037AK T146R | ROHM Semiconductor | INSTOCK | 11,940 | |||
| 1SNA103775R0000 | TE Connectivity | INSTOCK RoHS : Compliant | 10,764 | |||
| 103735-3 | TE Connectivity | INSTOCK RoHS : Not Compliant | 8,667 | |||
| PMBFJ310/3717 | ALD | INSTOCK | 7,007 | |||
| DS1037-25FNAKT74 | INSTOCK | 5,977 | ||||
| 160X10379X | Conec Corporation | INSTOCK RoHS : Compliant | 3,900 | |||
| 2SA1037AK | ROHM Semiconductor | INSTOCK RoHS : Compliant | 3,000 | |||
| 9041037 | INSTOCK | 1,168 | ||||
| 9810375 | INSTOCK | 962 | ||||
| 710103700-100-G | INSTOCK | 288 | ||||
| D71037CZ-10 | NECEL | INSTOCK | 139 | |||
| 103777-5 | INSTOCK | 50 | ||||
| 821-037 | INSTOCK | 50 | ||||
![]() Avnet Abacus | ECS-160-10-37-JGP-TR | ECS International Inc | Crystal Standard 16 MHz SMD 2mm x 16mm x 045mm 30 ppm 10 pF 20 ppm ECX1637 - Tape and Reel (Alt: ECS-160-10-37-JGP-TR) RoHS : Compliant | 120,000 | ||
| 532610371 | Molex | Pin Header Right Angle Signal WiretoBoard 125 mm 1 Rows 3 Contacts - Tape and Reel (Alt: 532610371) RoHS : Compliant | 108,800 | |||
| 5-103735-3 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 4 Contacts Through Hole MTE (Alt: 5-103735-3) RoHS : Compliant | 21,798 | |||
| 5-103735-1 | TE Connectivity | Pin Header WiretoBoard 254 mm 1 Rows 2 Contacts Through Hole Straight MTE (Alt: 5-103735-1) RoHS : Compliant | 13,703 | |||
| 529010374 | Molex | - Tape and Reel (Alt: 529010374) RoHS : Compliant | 2,200 | |||
| 550910374 | Molex | Conn Stacking Header 30 POS 6mm and 12mm Stack Height 0635mm Solder ST Surface Mount - Tape and Reel (Alt: 550910374) RoHS : Compliant | 2,000 | |||
| ECS-250-10-37B-CTN-TR | ECS International Inc | Crystal 25 MHz SMD 2mm x 16mm 20 ppm 10 pF 10 ppm ECX1637B Series - Tape and Reel (Alt: ECS-250-10-37B-CTN-TR) RoHS : Compliant | 2,000 | |||
| T4041037041-000 | TE Connectivity | Sensor Connector M8 Female 4 Positions PCB Socket Straight Panel Mount (Alt: T4041037041-000) RoHS : Compliant | 900 | |||
| 1910377 | Phoenix Contact | FKC 25 4ST FKC254ST (Alt: 1910377) RoHS : Compliant | 300 | |||
| 1037710000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1037710000) RoHS : Compliant | 100 | |||
| 1371037 | Phoenix Contact | MKDSP 25 31500 BDWHL3L1 MKDSP2531500BDWHL3L1 (Alt: 1371037) RoHS : Compliant | 0 | |||
| 10-02-1037 | Molex | (Alt: 10021037) RoHS : Compliant | 0 | |||
| 5-103765-3 | TE Connectivity | (Alt: 5-103765-3) RoHS : Compliant | 0 | |||
| DKTFM24WJ1037 | Kyocera AVX Components | (Alt: DKTFM24WJ1037) RoHS : Not Compliant | 0 | |||
| 61083-103700LF | Amphenol Corporation | Conn Stacking Plug 100 Position 13mm to 16mm Stack Height 08mm Solder ST SMD TR (Alt: 61083-103700LF) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | ECS-250-10-37B-CTN-TR | ECS International Inc | (Alt: ECS-250-10-37B-CTN-TR) RoHS : Compliant |
| 0 | |
| 951103-7622-AR | 3M Interconnect | (Alt: 951103-7622-AR) RoHS : Compliant | 0 | |||
| ECS-240-10-37-CWN-TR | ECS International Inc | (Alt: ECS-240-10-37-CWN-TR) RoHS : Compliant |
| 0 | ||
| ECS-250-10-37B2-CKM-TR | ECS International Inc | (Alt: ECS-250-10-37B2-CKM-TR) RoHS : Compliant | 0 | |||
| 3-103-778 | Schurter Electronic Components | (Alt: 3-103-778) RoHS : Compliant | 0 | |||
| ECS-400-10-37-CWN-TR | ECS International Inc | (Alt: ECS-400-10-37-CWN-TR) RoHS : Compliant | 0 | |||
| ECS-400-10-37B-CKY-TR | ECS International Inc | (Alt: ECS-400-10-37B-CKY-TR) RoHS : Compliant | 0 | |||
| ECS-250-10-37BQ-CTN-TR | ECS International Inc | (Alt: ECS-250-10-37BQ-CTN-TR) RoHS : Compliant |
| 0 | ||
| ECS-400-10-37QZ-RES-TR | ECS International Inc | (Alt: ECS-400-10-37QZ-RES-TR) RoHS : Compliant | 0 | |||
| 0532610371 | Molex | Pin Header, 3 Contacts, 1 Row, 1.25mm, Matte Tin, 1A, Right Angle, Shrouded, Phosphor Bronze, SMT RA (Alt: 0532610371) RoHS : Compliant | 0 | |||
| ECS-271.2-10-37-CKM-TR | ECS International Inc | (Alt: ECS-271.2-10-37-CKM-TR) RoHS : Compliant | 0 | |||
| ECS-400-10-37B-CKY-TR3 | ECS International Inc | (Alt: ECS-400-10-37B-CKY-TR3) RoHS : Compliant |
| 0 | ||
ECS-250-10-37Q-ES-TR![]() | ECS International Inc | (Alt: ECS-250-10-37Q-ES-TR) RoHS : Compliant | 0 | |||
| 3-103-712 | Schurter Electronic Components | (Alt: 3-103-712) RoHS : Compliant | 0 | |||
| X1E000021037500 | Epson Electronics America Inc | (Alt: X1E000021037500) RoHS : Compliant | 0 | |||
![]() Avnet Silica | A10376 | Antenova M2M | Amia Cellular SMD Antenna (Alt: A10376) RoHS : Compliant | 0 | ||
| SI311103757 | 2J USA | Black Screw Mount 5G1 Tube (Alt: SI311103757) RoHS : Compliant | 0 | |||
| OM11037,598 | NXP Semiconductors | LPC3141 32Bit ARM Based Microcontroller Evaluation Board (Alt: OM11037,598) RoHS : Compliant | 0 | |||
| KX122-1037-FR | ROHM Semiconductor | Accelerometer Triple 2g4g8g 171V to 36V 4096Countg8192Countg16384Countg 12Pin LGA (Alt: KX122-1037-FR) RoHS : Compliant | 0 | |||
| R5F10377ANA#05 | Renesas Electronics Corporation | (Alt: R5F10377ANA#05) RoHS : Compliant | 0 | |||
DSC1001CE1-037.1250![]() | Microchip Technology Inc | (Alt: DSC1001CE1-037.1250) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 410370 | Septentrio NV | AsteRx SBi3 Pro+ |
| 0 | |
| CAB.01037 | Taoglas Antenna Solutions | Hirose U.FL to 250mm 1.13 to SMA(F)BKST |
| 0 | ||
| 410372 | Septentrio NV | AsteRx-i3 D evaluation kit unit is a bundle designed to provide a complete setup for GNSS operations |
| 0 | ||
![]() Component Electronics, Inc | 1037 | Keystone Electronics Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 7,335 | |
| CR10-37R4FM | TAD Electronics Ltd | IN STOCK SHIP TODAY |
| 3,000 | ||
| 1-103783-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,822 | ||
| 103795-9 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,494 | ||
| 39-32-1037 | Molex | IN STOCK SHIP TODAY | 1,000 | |||
| 103747-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 350 | ||
| 53261-0371 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 290 | ||
| 10376-050 | IN STOCK SHIP TODAY | 207 | ||||
| 103747-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 170 | ||
| 103783-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 50 | ||
MAX1037EKA-T![]() | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 30 | ||
| MG10-375G4 | IN STOCK SHIP TODAY | 4 | ||||
| 171-037-202-021 | NorComp | IN STOCK SHIP TODAY | 3 | |||
| 65L811TN1037 | General Electric Company | IN STOCK SHIP TODAY | 2 | |||
| 2-223N103-7 | IN STOCK SHIP TODAY | 2 | ||||
![]() DB Roberts | AA6346-31-0.375-00 | Lyn-Tron Inc |
| 3,885 | ||
| 31037037B | Essentra Components | SHOULDER SCREW, HEX SOCKET, 51 | 0 | |||
| KD11-0375 | Shercon Inc | MSKNG TAPE 3/8 X 60 YDS 300 DEG 96/CASE | 0 | |||
| 10371F | Heyco | HLCBSC3-08 V-0 NATURAL | 0 | |||
| XT2810375A | Essentra Components | 0 | ||||
| MP-01-103-757 | Southco | Choose push-to-close twist-to-open convenience in an elegant design that actually enhances performance. An anti-vibration feature keeps enclosures quiet despite normal vibrations. This highly designed latch is offered in two different mechanisms and mu | 0 | |||
| PRG510-37 | Pop Rivets | VALVE TUBE | 0 | |||
| MP-01-103-744 | Southco | Choose push-to-close twist-to-open convenience in an elegant design that actually enhances performance. An anti-vibration feature keeps enclosures quiet despite normal vibrations. This highly designed latch is offered in two different mechanisms and mu | 0 | |||
| 1037-093-SS-20 | RAF Electronic Hardware | 0 | ||||
| AV-D30-15A103-76 | Southco | AV-D30-15A103-76 | 0 | |||
| 47-10-371-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 31037062 | Essentra Components | SHOULDER SCREW, HEX SOCKET, 51 | 0 | |||
| 47-10-371-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 11810-10379 | Avdel | BRIV RIV 3/16 MH ST | 0 | |||
| 27XT2810375N | Essentra Components | FIR TREE RIVET, .281 HOLE, .06 | 0 | |||
![]() EBV Elektronik | ACFM-1037 | Broadcom Limited | RF Multiplexer Hexaplexer 21GHz 18GHz 26GHz SMD (Alt: ACFM-1037) RoHS : Compliant | 0 | ||
| ACFM-1037-TR1 | Broadcom Limited | (Alt: ACFM-1037-TR1) RoHS : Compliant | 0 | |||
| C10373_NIS83-MX-7-M | LEDIL | (Alt: C10373_NIS83-MX-7-M) RoHS : Compliant | 0 | |||
| DSC1001DL1-037.1250 | Microchip Technology Inc | MEMS Oscillator 37125 MHz SMD 25mm x 2mm 50 ppm 33 V DSC1001 (Alt: DSC1001DL1-037.1250) RoHS : Compliant | 0 | |||
DSC1001CE1-037.1250![]() | Microchip Technology Inc | (Alt: DSC1001CE1-037.1250) RoHS : Compliant | 0 | |||
| DSC1001DL1-037.1250T | Microchip Technology Inc | MEMS OSC LVCMOS 37125MHz 50PPM 1833V 40 to 105C 25 x 20mm (Alt: DSC1001DL1-037.1250T) RoHS : Compliant | 0 | |||
| DSC1001DI1-037.1250T | Microchip Technology Inc | MEMS OSC LVCMOS 37125MHZ 50PPM 1833V 40 TO 85C 25X20MM (Alt: DSC1001DI1-037.1250T) RoHS : Compliant | 0 | |||
| CM8071505103711S RNJK | Intel Corporation | Microprocessor 8 Cores 64bit Core i7 26 GHz FCLGA 1700 Pins (Alt: 99CHCD) RoHS : Compliant | 0 | |||
| CM8071505103723S RQDU | Intel Corporation | INTEL CORE 7 PROCESSOR 251E BARTLETT LAKE (Alt: 99CMVZ) RoHS : Compliant | 0 | |||
| CM8071505103704S RMG3 | Intel Corporation | Microprocessor 16 Cores 64bit Core i7 19 GHz FCLGA 1700 Pins (Alt: 99C6JJ) RoHS : Compliant | 0 | |||
![]() Flip Electronics | UPD78F1037AGBS-GAH-G | Renesas Electronics Corporation | Stock | 251 | ||
![]() Master Electronics | 5-103765-3 | TE Connectivity | 03 MODII HD SRRA B/A .100CL LF RoHS : Compliant |
| 318 | |
| 1-103735-4 | TE Connectivity | 15 MTE HDR SRST LATCH .100CL MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 10-02-1037 | Molex | Conn Unshrouded Header HDR 3 POS 5.08mm Solder ST Thru-Hole SPOX¢A€žA¢ Bag RoHS : Compliant |
| 0 | ||
| 351-1037-000 | ITT Interconnect Solutions | GeneralPartSpec: MIL-DTL-26482 Style ConnectorType: Grommet ConnectorStyle: ComponentNS RoHS : Compliant |
| 0 | ||
| 3241037 | Phoenix Contact | Cable gland made from brass with Pg thread - IP40 protection RoHS : Compliant |
| 0 | ||
| 4-2271037-0 | TE Connectivity | Ejector Header Vertical 2.54mm Pitch RoHS : Compliant |
| 0 | ||
| FFSD-25-D-10.37-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 121551-0374 | ITT Interconnect Solutions | Rectangular D-Sub Metal Mixed Layout Socket Steel Combo D Series | ITT Cannon DAMX3W3SA197 RoHS : Compliant |
| 0 | ||
| 110371-0031 | ITT Interconnect Solutions | Conn MIL-DTL-38999 Circular PIN 3 POS Crimp ST Jam Nut 3 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 110371-0068 | ITT Interconnect Solutions | KJ7T8N35SDL27 RoHS : Not Compliant |
| 0 | ||
| 110375-0224 | ITT Interconnect Solutions | KJ7T16A35SNL; 38999 Series I II and III; Circula RoHS : Compliant |
| 0 | ||
| 113011-0379C | ITT Interconnect Solutions | CIRCULAR RoHS : Not Compliant |
| 0 | ||
| 121091-0379 | ITT Interconnect Solutions | CA02L18-1S-B RoHS : Not Compliant |
| 0 | ||
| 80-6103-7881-4 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 042941-0373 | ITT Interconnect Solutions | CoC and 2-years warranty / RFQ for pricing RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C10375-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and right angle a type N cable connection on the other. Our low loss a type N to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10375-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10375-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10375-24 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10375-24 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 217 | |
| PE3C10377-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Low Loss Cable 48 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly SMA male to SMA male low loss cable 48 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 48 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss a SMA to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10377-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10377-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. SMA plug to SMA plug cable assembly PE3C10377-48 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. |
| 108 | ||
| PE3C10379-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to SMA Male Low Loss Cable 60 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to SMA male low loss cable 60 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 60 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10379-60 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10379-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to SMA plug cable assembly PE3C10379-60 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10379-60 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. |
| 87 | ||
| PE3W11037-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Fire Rated N Male to N Male Low PIM Cable 100 cm Length Using SPF-500 Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low PIM cable 100 cm length using SPF-500 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated N male to N male low PIM cable 100 cm length using SPF-500 coax with Times Microwave components, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W11037-100CM can also be known as a low PIM N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3W11037-100CM is built with SPF-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N male low PIM cable 100 cm length using SPF-500 coax with Times Microwave components. |
| 35 | ||
| PE3W11037LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Fire Rated N Male to N Male Low PIM Cable 100 CM Length Using SPF-500 Coax With Times Microwave Components, LF Solder., Radio frequency assembly fire rated N male to N male low PIM cable 100 cm length using SPF-500 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated N male to N male low PIM cable 100 cm length using SPF-500 coax with Times Microwave components, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W11037LF-100CM can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W11037LF-100CM is built with SPF-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N male low PIM cable 100 cm length using SPF-500 coax with Times Microwave components, LF solder. |
| 35 | ||
| PEANKIT1037 | Pasternack Enterprises | Key Specifications. Antenna Type Omni. Helium Hotspot PRO Antenna Upgrade Kit, 8dBi 800MHz Omni w/ N Male to RP-SMA Plug, 10ft Low Loss 400 Cable. The PEANKIT1037 EU Helium Hotspot PRO Antenna Upgrade Kit from Pasternack was designed with the serious Helium HNT Miner in mind. PEANKIT1037 provides your LongFi radio with the proper components to get the most out of your hotspot with optimized range, increased witnessing and Proof-of-Coverage over OEM components. The PEANKIT1037 achieves enhanced performance by utilizing Pasternack’s 800 MHz PRO-Series high-performance Omni-directional antennas designed for the 800 MHz European ISM band. These LoRa, LoRaWAN antennas feature a rugged 1.58" diameter UV-stable fiberglass radome for durability, aesthetics and long service life. The PEANKIT1037 comes with a 8 dBi Omni Antenna that operates from 824 MHz to 876 MHz frequency range. Combined with our Low Loss 400 series cable, the 400 cable features equal performance and mechanical characteristics to cables from CommScope®, Times Microwave Systems®, Belden® and Andrew®. This 10 ft Low Loss cable comes terminated with an N Male connector, to the antenna, and an RP-SMA Male connector compatible with the leading Hotspot miners on the market. The PEANKIT1037 from Pasternack brings industry proven components direct to the Helium enthusiast, ship worldwide the same day as with our other available RF parts. |
| 29 | ||
| PE1037 | Pasternack Enterprises | Key Specifications. Primary Application Audio/Video/Data Cable Family/Type D-Subminiature Part Type Dust Cap/Cover Connector Series 9-Pin D-Subminiature/HD15. Assembled D-Sub Hood Kit, DB9/HD26 Metalized Chrome., Pasternack’s PE1037 is an assembled D-sub hood kit that has a two-piece cover design for easy and quick assembly. This hood kit is built for 9-pin D-subminiature/HD26 connectors. Our assembled hood kit has a metalized plastic backshell for covering D-sub cable assembly connectors. This D-sub hood kit is suitable for device management, data networks, instrument control, and serial data transmission applications. The PE1037 assembled hood kit from Pasternack is made of plastic with a body length of 1.39 inches. This hood kit has internal cable strain relief, which provides enhanced durability, and is also available in a D-sub 15 position size. Our D-sub hood kit has metalized chrome plating, which provides an economical method of shielding backshells. Additional specifications for this D-subminiature hood kit are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of hood kits for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal assembled D-sub hood kit for your requirements. |
| 19 | ||
| PEWCP1037 | Pasternack Enterprises |
| 9 | |||
| PE3CA1037-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141EAM, RF Cable Type: PE-141FLEX, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male Right Angle to SMA Male Right Angle Cable 36 Inch Length Using PE-141FLEX Coax, RoHS., Radio frequency assembly SMA male right angle to SMA male right angle cable 36 inch length using PE-141FLEX coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 36 inch length using PE-141FLEX coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3CA1037-36, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3CA1037-36 is built with PE-141FLEX which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 27 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 36 inch length using PE-141FLEX coax, RoHS. |
| 5 | ||
| PE3C10373-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated 7/16 DIN Male to N Male Low PIM Cable 48 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 7/16 DIN male to N male low PIM cable 48 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 7/16 DIN male to N male low PIM cable 48 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM a 7/16 DIN to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10373-48 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10373-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 7/16 DIN plug to type N plug cable assembly PE3C10373-48 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10373-48 can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10372 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. QMA Male to MMCX Plug Cable Using RG316 Coax. PE3W10372 is a QMA male to MMCX plug cable using RG316 coax. This Pasternack QMA male to MMCX plug cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm MMCX for connector 2. Our male QMA to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10372 QMA male to MMCX plug cable assembly is constructed with RG316 coax. | 0 | |||
| PEWCT1037 | Pasternack Enterprises |
| 0 | |||
| PE3C10370-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated N Male to N Male Low PIM Cable 24 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low PIM cable 24 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated N male to N male low PIM cable 24 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10370-24 can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10370-24 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10370-24 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1037-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SMA Male to N Male Right Angle Low Loss Cable 50 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to N male right angle low loss cable 50 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N male right angle low loss cable 50 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle N type cable connection on the other. Our low loss SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3C1037-50CM, can also be known as a low loss SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3C1037-50CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1037-50CM can also be used in the other direction and will be right angle type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 50 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3C10371 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm. Fire Rated 4.3-10 Male to 7/16 DIN Male Low PIM Cable Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 7/16 DIN male low PIM cable using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 7/16 DIN male low PIM cable using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10371 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10371 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10371 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10371 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. | 0 | |||
![]() Vyrian | LT1037ACN8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 50uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 11,094 | ||
| 1-103735-4 | TE Connectivity | Board Connector, 15 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Not Compliant | 10,704 | |||
JM38510/37701BEA![]() | Texas Instruments | Decoder/Driver, ALS Series, Inverted Output, TTL, CDIP16 RoHS : Not Compliant | 9,674 | |||
| JM38510/37003SCA | Texas Instruments | 9,263 | ||||
M38510/37005SFA![]() | Texas Instruments | NAND Gate, ALS Series, 1-Func, 13-Input, TTL, CDFP16 | 9,232 | |||
| JM38510/37101SDA | Texas Instruments | 8,888 | ||||
M38510/37001SCX![]() | Texas Instruments | NAND Gate, ALS Series, 4-Func, 2-Input, TTL, CDIP14 | 8,394 | |||
| JM38510/37201SEA | Texas Instruments | 8,066 | ||||
M38510/37101SCX![]() | Texas Instruments | D Flip-Flop, ALS Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, TTL | 7,205 | |||
M38510/37005B2X![]() | Texas Instruments | NAND Gate, ALS Series, 1-Func, 13-Input, TTL, CQCC20 | 6,547 | |||
M38510/37701SFX![]() | Texas Instruments | Decoder/Driver, ALS Series, Inverted Output, TTL, CDFP16 | 5,731 | |||
M38510/37301SDX![]() | Texas Instruments | NOR Gate, ALS Series, 4-Func, 2-Input, TTL | 5,535 | |||
M38510/37004SCA![]() | Texas Instruments | NAND Gate, ALS Series, 1-Func, 8-Input, TTL, CDIP14 | 4,911 | |||
M38510/37302BCA![]() | Texas Instruments | NOR Gate, ALS Series, 3-Func, 3-Input, TTL, CDIP14 RoHS : Not Compliant | 4,150 | |||
JM38510/37101BCA![]() | Texas Instruments | D Flip-Flop, ALS Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, TTL, CDIP14 RoHS : Not Compliant | 4,031 | |||
![]() Waytek, Inc. | 19221-0379 | Molex | 2/0 Copper Eyelet 3/8" Stud RoHS : Compliant |
| 518 | |
| 192210378 | Molex | 1GA Copper Eyelet 3/8" Stud RoHS : Compliant |
| 0 | ||
| 19221-0377 | Molex | 1/0 Copper Eyelet 3/8" Stud RoHS : Compliant |
| 0 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |