1008C-R36K Price, Reseller, Stock

Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Jack, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: TRB PLUG. 78 Ohm TRB Jack Bulkhead Mount 1553 Connector Solder Attachment TRB PLUG,. PE410-08593 TRB jack bulkhead triaxial connector has an interface type of TRB jack trb plug and a 78 Ohm impedance.Pasternack TRB jack bulkhead connector uses shield/contact solder/solder as an attachment method. Our jack TRB triaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB triaxial connector has a brass body with nickel plating. This TRB jack bulkhead triaxial RF connector is REACH compliant. Our high quality PE410-08593 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our bulkhead TRB jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement.

1 : $27.19
25 : $25.83
50 : $24.47
100 : $23.38

436

PESMA1008-50PK

Pasternack Enterprises

Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 2.4 GHz Maximum Frequency 5.825 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 2400-2500/ 5150- 5825 MHz, 2.82/3.43 dBi, Stamped Metal AP/Router Embedded Antenna-50 Pack., Linear polarized antenna PESMA1008-50PK from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna has a maximum frequency of 5825 MHz and a minimum frequency of 2400 MHz. This 50-pack stamped metal antenna has a maximum input VSWR of 2:1. This stamped metal antenna has an overall length of 1.46 inches and a width of 0.33 inches. Pasternack’s PESMA1008-50PK is a dual band antenna operating from 2400 to 2500 MHz with 2.82 dBi gain and 5150 to 5825 MHz with 3.43 dBi gain. Our high-quality 50-pack omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1008-50PK 50-pack stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas.

1 : $56.99
25 : $54.14
50 : $51.29
100 : $49.01

PEWSP1008

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-90, Waveguide Size 2: WR-90, Length: 4.25 inches, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz, Flange Type 1: CPR-90G, Flange Type 2: CPR-90G. WR-90 Waveguide Pressurizing Section 4.25 Inch Length, CPR-90G Grooved Flange from 8.2 GHz to 12.4 GHz. Pasternack's PEWSP1008 is a 4.3-inch WR-90 straight waveguide section that operates from 8.2 GHz to 12.4 GHz. This straight waveguide section offers a maximum 1.07:1 VSWR. The input and output of this straight waveguide section are cpr-90g. PEWSP1008 is part of over 40,000 RF, microwave and millimeter wave components. The WR-90 straight waveguide section will ship worldwide the same day it is purchased along with our other RF components. Our straight waveguide section has waveguide sizes of WR-90 on both sides. The WR-90 waveguide section in straight design is 4.3 inches in length. This WR-90 waveguide section is made of bronze waveguide material. Make your online purchase right now to take advantage of our same-day shipping. This waveguide section has cpr-90g made of bronze for its input and output. The PEWSP1008 straight waveguide section is suitable for test benches, radar, satellite, microwave radio, high power applications. Additional dimensions and specifications for this WR-90 straight waveguide section are in our downloadable PDF datasheet. Our RF, microwave and millimeter wave products maintain a 99.4% availability and are part of the broadest selection in the industry. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality WR-90 straight waveguide section that meets your requirements.

1 : $463.99
5 : $445.43
10 : $426.87

PE87FL1008

Pasternack Enterprises

Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 17.2 GHz, Bandpass Max Frequency: 18.2 GHz, RF Filter Design: Combline, Impedance: 50 Ohm, Maximum Insertion Loss: 1.5 dB, Maximum Power: 2 Watts. 6 Section Bandpass Filter With SMA Female Connectors Operating From 17.2 GHz to 18.2 GHz With a 1,000 MHz Passband. Bandpass filter PE87FL1008 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female and in a 6 section design. This 6 section SMA bandpass filter for has an insertion loss of 1.5 dB and a maximum power of 2 Watts. Frequency range of this band pass filter is 17.2 GHz to 18.2 GHz and the passband is 1 GHz. PE87FL1008 bandpass filter for band is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our 6 section bandpass filter can be bought and shipped worldwide the same-day as with our other in-stock RF parts.

1 : $630.0
10 : $604.8
25 : $579.6

PEWGK1008

Pasternack Enterprises

1 : $51.99
25 : $49.39
50 : $46.79
100 : $44.71

PE3W10080

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to SHV Plug Cable Using RG225 Coax. PE3W10080 is a SHV jack bulkhead to SHV plug cable using RG225 coax. This Pasternack SHV jack bulkhead to SHV plug cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV bulkhead to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10080 SHV jack bulkhead to SHV plug cable assembly is constructed with RG225 coax.

PE3C11008/HS

Pasternack Enterprises

PE3W10089

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to Reverse Polarity MCX Plug Cable Using RG174 Coax. PE3W10089 is a FAKRA jack to reverse polarity MCX plug cable using RG174 coax. This Pasternack FAKRA jack to reverse polarity MCX plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm MCX for connector 2. Our jack FAKRA to reverse polarity plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10089 FAKRA jack to MCX reverse polarity plug cable assembly is constructed with RG174 coax.

PE3C10083-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Female to TNC Female Bulkhead Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female bulkhead cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female bulkhead cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10083-9 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10083-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10083-9 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $209.99
25 : $199.49
50 : $188.99
100 : $180.59

PEWTR1008

Pasternack Enterprises

Key Specifications, Maximum Power: 5 Watt, Waveguide Size: WR-112, Minimum Frequency: 7.05 GHz, Maximum Frequency: 10 GHz.

1 : $725.0
5 : $696.0
10 : $667.0

PE3C10083

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female to TNC Female Bulkhead Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female bulkhead cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female bulkhead cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10083 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10083 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10083 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

PE3W10087

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Male Right Angle Cable Using PE-SR402FLJ Coax. PE3W10087 is a N female bulkhead to N male right angle cable using PE-SR402FLJ coax. This Pasternack N female bulkhead to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male N right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W10087 N female bulkhead to N male right angle cable assembly is constructed with PE-SR402FLJ coax.

PEWAT1008-6

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-22, Attenuation, Typical: 6 dB, Flange Size: UG-383/U, VSWR: 1.15:1, Minimum Frequency: 33 GHz, Maximum Frequency: 50 GHz, Maximum Power: 4 W. WR-22 Waveguide Fixed Attenuator, 6 dB, from 33 GHz to 50 GHz, UG-383/U Round Cover Flange, 4W Power., WR-22 Pasternack waveguide fixed attenuator PEWAT1008-6 is in stock at our ISO 9001:2008 certified facilities that ship same-day internationally. Pasternack WR-22 gold-plated waveguide attenuators function up to 50 GHz maximum frequency rating. This 33 GHz to 50 GHz fixed waveguide attenuator PEWAT1008-6 has round cover gold-plated flanges and is in stock continuously. Waveguide fixed attenuator WR-22 with aluminum round cover flanges from Pasternack has a high-quality rating of 6 dB attenuation accuracy. Pasternack has been supplying waveguide components like these 33 GHz to 50 GHz 6 dB aluminum fixed attenuators since it started business in 1972. Off-the-shelf online or by phone, we ship these industry-leading round cover UG-383/U gold plated flanged WR-22 waveguide fixed attenuators around the globe. PEWAT1008-6 medium power waveguide fixed attenuator at 50 GHz max frequency and 33 GHz minimum frequency is able to achieve amazing RF performance with 4 watts of peak input power. These 4W WR-22 waveguide attenuators at 6 dB fixed attenuation by Pasternack have a typical 1.15:1 VSWR (voltage standing wave ratio). WR-22 waveguide gold plated fixed attenuator that operates in the 33 GHz to 50 GHz range is 0.224 inches in width. 0.224 inch wide 4W aluminum waveguide attenuator fixed from Pasternack has a length of 2 inches. Satellite, RADAR, and wireless communications systems utilize 50 GHz 0.224 by 2-inch gold-plated waveguide 6 dB attenuators that have round cover UG-383/U flanges. Precise CAD drawings are accessible for these WR-22 6 dB PEWAT1008-6 waveguides with specifications and dimensions on our PDF datasheet download. For any issues with our 4W 0.224 inch wide fixed attenuators that use round cover aluminum flanges, Pasternack tech support experts are always at your disposal. Let Pasternack and our knowledgeable sales team be your first and last stop to purchase top-shelf waveguide components like this 4 watt 6 dB attenuation WR-22 fixed attenuator at 33 GHz to 50 GHz.

1 : $1,290.0
5 : $1,238.4
10 : $1,186.8
25 : $1,135.2

PE3C10083-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 3.5mm Female to TNC Female Bulkhead Cable 24 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to TNC female bulkhead cable 24 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to TNC female bulkhead cable 24 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and female on end 2. PE3C10083-24 can also be known as a 3.5mm jack to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC jack cable assembly PE3C10083-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10083-24 can also be used in the other direction and will be TNC female bulkhead to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $221.99
25 : $210.89
50 : $199.79
100 : $190.91

PE3W10086

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Cable Using PE-P195 Coax. PE3W10086 is a 7/16 DIN male right angle to 7/16 DIN male right angle cable using PE-P195 coax. This Pasternack 7/16 DIN male right angle to 7/16 DIN male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN right angle to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10086 7/16 DIN male right angle to 7/16 DIN male right angle cable assembly is constructed with PE-P195 coax.

Venkel Ltd.

WRFI1008-S-103JT

VENKEL LTD

Wirewound RF Inductor;1008;10uH;�5%
RoHS : Not Compliant

WRFI1008-S-22NJT

VENKEL LTD

Wirewound RF Inductor;1008;22nH;�5%
RoHS : Not Compliant

WRFI1008-S-R27KT

VENKEL LTD

Wirewound RF Inductor;1008;270nH;�10%
RoHS : Not Compliant

C0201HQN100-8R5DNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;8.5pF;�0.5pF
RoHS : Compliant

C0201HQN100-8R8BNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;8.8pF;�0.1pF
RoHS : Compliant

WRFI1008-S-123GT

VENKEL LTD

Wirewound RF Inductor;1008;12uH;�2%
RoHS : Not Compliant

WRFI1008-S-24NGT

VENKEL LTD

Wirewound RF Inductor;1008;24nH;�2%
RoHS : Not Compliant

WRFI1008-S-30NJT

VENKEL LTD

Wirewound RF Inductor;1008;30nH;�5%
RoHS : Not Compliant

WRFI1008-S-39NKT

VENKEL LTD

Wirewound RF Inductor;1008;39nH;�10%
RoHS : Not Compliant

WRFI1008-S-R18JT

VENKEL LTD

Wirewound RF Inductor;1008;180nH;�5%
RoHS : Not Compliant

WRFI1008-S-R39GT

VENKEL LTD

Wirewound RF Inductor;1008;390nH;�2%
RoHS : Not Compliant

C0201HQN100-8R6CNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;8.6pF;�0.25pF
RoHS : Compliant

C0201HQN100-8R3BNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;8.3pF;�0.1pF
RoHS : Compliant

WRFI1008-S-12NGT

VENKEL LTD

Wirewound RF Inductor;1008;12nH;�2%
RoHS : Not Compliant

WRFI1008-S-153KT

VENKEL LTD

Wirewound RF Inductor;1008;15uH;�10%
RoHS : Not Compliant

Waytek, Inc.

10080

Hillsdale Terminal & Tool Inc

22-18 GA Butt Connectors NON-INSULATED

100 : $0.0552
200 : $0.0501
500 : $0.0448
1,000 : $0.0406
5,000 : $0.0388

208,475

19141-0085

Molex

12-10 GA #10 Spade Terminal Non-Insulated
RoHS : Compliant

100 : $0.1623
200 : $0.1475
500 : $0.1311
1,000 : $0.1191
5,000 : $0.1136

26,146

13510085

Aptiv PLC

2 Way Female GT 150 Sealed Connector DELPHI 13510085

10 : $0.8826
50 : $0.8498
100 : $0.7623
200 : $0.7257
500 : $0.7003
1,000 : $0.6747

1,675

OS110-08

NSPA

12-10GA Ring #8 Connector Yellow Stripe Heat Shrink Clear 3280132508 32708

10 : $1.1347
50 : $1.0112
100 : $0.9176
200 : $0.8876
500 : $0.8576
1,000 : $0.824

1,582

57080 OR 611-008

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #8 Band 1/2" 7/16 TO 1 IN

10 : $1.378
50 : $1.2299
100 : $1.116
200 : $1.0819
500 : $1.0421
1,000 : $1.0022

1,131

14100853

Sargent Quality Tools

Crimp Tool Ratchet Assembly Delphi GM 08913440 Formally MFG PN 3182 LCT

1 : $212.23
10 : $199.34

14100855

Sargent Quality Tools

Metri-Pack Crimping Tool DELPHI # 12070947 (Formally PN SP2740/3184LCT)

1 : $212.23
10 : $199.34

14100859

Sargent Quality Tools

Crimp Tool 8 Ga - 2 Ga (Formally PN SP2747 / 6220 CT)

1 : $179.83
10 : $168.9

1008C-R36K Reseller

Enlace URL