075-R24 Price, Reseller, Stock

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

E3-1250-075

Southco

EBV Elektronik

PCT2075TP,147

NXP Semiconductors

Temperature Sensor IC Digital 1C 55 C 125 C HWSON 8 Pins (Alt: PCT2075TP,147)
RoHS : Compliant

300,000

TDSR0750

Vishay Intertechnologies

DISPLAY 7SEG 7MM RED LC CAe4 (Alt: TDSR0750)
RoHS : Compliant

39,000

IPP075N15N3GXKSA1

Infineon Technologies AG

Transistor MOSFET NCH 150V 100A 3Pin TO220 Tube (Alt: SP000680832)
RoHS : Compliant

25,000

NTH4L075N065SC1

onsemi

Silicon Carbide MOSFET Single N Channel 38 A 650 V 85 MilliOhms TO247 4 Pins (Alt: NTH4L075N065SC1)
RoHS : Compliant

11,250

IRS20752LTRPBF

Infineon Technologies AG

MOSFET Driver High Side 10 V to 18 V supply 160 mA out 215 ns delay SOT236 (Alt: SP001548576)
RoHS : Compliant

3,000

UJ4SC075018L8S

onsemi

Silicon Carbide SiC Cascode JFET EliteSiC18 mohm 750VTOLL (Alt: UJ4SC075018L8S)
RoHS : Compliant

2,000

UJ4SC075005L8S

onsemi

Silicon Carbide MOSFET Single N Channel 120 A 750 V 54 mohm MO299 (Alt: UJ4SC075005L8S)
RoHS : Compliant

2,000

SIHK075N60E-T1-GE3

Vishay Intertechnologies

(Alt: SIHK075N60E-T1-GE3)
RoHS : Compliant

2,000

BXEB-L0340U-30G0750-C-C3

Bridgelux Inc

Linear LED Module 68 LEDs Screw Mount Tray (Alt: BXEB-L0340U-30G0750-C-C3)
RoHS : Compliant

1,680

UJ4C075033B7S

onsemi

Silicon Carbide MOSFET Single N Channel 44 A 750 V 0041 ohm TO263 D2PAK (Alt: UJ4C075033B7S)
RoHS : Compliant

800

NVBG075N065SC1

onsemi

Silicon Carbide MOSFET Single N Channel 37 A 650 V 85 MilliOhms TO263 D2PAK 7 Pins (Alt: NVBG075N065SC1)
RoHS : Compliant

800

FP11075_LISA2-M-CLIP

LEDIL

LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11075_LISA2-M-CLIP)
RoHS : Compliant

800

UJ4C075023K4S

onsemi

Silicon Carbide MOSFET Single N Channel 66 A 750 V 23 mohm TO247 (Alt: UJ4C075023K4S)
RoHS : Compliant

600

IT FIT 120/220-240/750 D CS L

Inventronics (Hangzhou) Inc

6977078991735 IT FIT 120220240750 D CS L old PN 4062172317245 (Alt: 6977078991735)
RoHS : Compliant

400

FXR.07.52.0075X.A

Taoglas Antenna Solutions

RF Antenna 1356MHz NFC 100 ohm Adhesive (Alt: FXR.07.52.0075X.A)
RoHS : Compliant

Pasternack Enterprises US

PE3C10754

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. 1.85mm Male to Mini SMP Female Right Angle Cable Using PE-SR405FL Coax., Pasternack’s PE3C10754 1.85mm male to right angle mini SMP female RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to mini SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a right angle mini SMP cable connection on the other. Our 1.85mm to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10754 can also be known as a 1.85mm plug to right angle mini SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to right angle mini SMP female cable has a maximum VSWR of 1.4:1. This PE3C10754 1.85mm plug to mini SMP jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to right angle mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10754 can also be used in the other direction and will be a right angle mini SMP female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to mini SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to mini SMP cable assembly for quick shipment worldwide. Variations of 1.85mm and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to mini SMP RF cable assembly as per your requirements.

PE3C10757

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. 1.85mm Male to SSMC Plug Cable Using PE-SR405FL Coax., Pasternack’s PE3C10757 1.85mm male to SSMC plug RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10757 can also be known as a 1.85mm plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10757 1.85mm plug to SSMC male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10757 can also be used in the other direction and will be an SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements.

PE3W00755

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. 7/16 DIN Female 4 Hole Flange to 7/16 DIN Female 4 Hole Flange Cable Using RG213 Coax. PE3W00755 is a 7/16 DIN female 4 hole flange to 7/16 DIN female 4 hole flange cable using RG213 coax. This Pasternack 7/16 DIN female 4 hole flange to 7/16 DIN female 4 hole flange cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female 7/16 DIN 4 hole flange to female 7/16 DIN 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00755 7/16 DIN female 4 hole flange to 7/16 DIN female 4 hole flange cable assembly is constructed with RG213 coax.

PE3W07532

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug to SSMB Jack Bulkhead Cable Using RG316 Coax. PE3W07532 is a MMBX plug to SSMB jack bulkhead cable using RG316 coax. This Pasternack MMBX plug to SSMB jack bulkhead cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SSMB for connector 2. Our plug MMBX to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07532 MMBX plug to SSMB jack bulkhead cable assembly is constructed with RG316 coax.

PE3W07536/HS/PH270

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to TNC Male Right Angle Cable Using RG316-DS Coax with HeatShrink and 270 Deg. Clock. PE3W07536/HS/PH270 is a MCX plug right angle to TNC male right angle cable using RG316-DS coax. This Pasternack MCX plug right angle to TNC male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm TNC for connector 2. MCX right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07536/HS/PH270 MCX plug right angle to TNC male right angle cable assembly is constructed with RG316-DS coax.

PE3W07550LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Right Angle Bulkhead to BNC Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W07550LF/HS is a 1.0/2.3 jack right angle bulkhead to BNC male cable using RG58 coax. This Pasternack 1.0/2.3 jack right angle bulkhead to BNC male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm BNC for connector 2. 1.0/2.3 right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack 1.0/2.3 right angle bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07550LF/HS 1.0/2.3 jack right angle bulkhead to BNC male cable assembly is constructed with RG58 coax.

PE3W07569

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to Reverse Polarity SMA Female Cable Using RG303 Coax. PE3W07569 is a reverse polarity SMA male to reverse polarity SMA female cable using RG303 coax. This Pasternack reverse polarity SMA male to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male SMA to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07569 SMA reverse polarity male to SMA reverse polarity female cable assembly is constructed with RG303 coax.

PE3W23075

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Plug Right Angle to 75 Ohm 1.6/5.6 Plug Cable Using 75 Ohm RG59 Coax. PE3W23075 is a SMB plug right angle to 1.6/5.6 plug cable using RG59 coax. This Pasternack SMB plug right angle to 1.6/5.6 plug cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm 1.6/5.6 for connector 2. SMB right angle to 1.6/5.6 coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to plug 1.6/5.6 cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W23075 SMB plug right angle to 1.6/5.6 plug cable assembly is constructed with RG59 coax.

PE3C0752-36

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length: 36 inches. 1.85mm Male to 1.85mm Male Cable 36 Inch Length Using PE-P086 Coax., Radio frequency assembly 1.85mm male to 1.85mm male cable 36 inch length using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 36 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C0752-36, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C0752-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 36 inch length using PE-P086 coax.

1 : $246.99
25 : $234.64
50 : $222.29

PE3C0754

Pasternack Enterprises

PE3C6075LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMA Male Cable Using PE-SR405FLJ Coax, LF Solder. PE3C6075LF is a 2.92mm male to SMA male cable using PE-SR405FLJ coax. This Pasternack 2.92mm male to SMA male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. Our male 2.92mm to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C6075LF 2.92mm male to SMA male cable assembly is constructed with PE-SR405FLJ coax.

PE3W00507-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SMA Male to N Male Right Angle Cable 50 CM Length Using PE-SR402FL Coax., Radio frequency assembly SMA male to N male right angle cable 50 cm length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N male right angle cable 50 cm length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle type N cable connection on the other. Our SMA to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3W00507-50CM, can also be known as a SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W00507-50CM is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00507-50CM can also be used in the other direction and will be right angle type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle cable 50 cm length using PE-SR402FL coax.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W00758

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Male Cable Using RG8X Coax. PE3W00758 is a SMA male right angle to N male cable using RG8X coax. This Pasternack SMA male right angle to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00758 SMA male right angle to N male cable assembly is constructed with RG8X coax.

PE3W07522/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. UHF Female to Mini UHF Male Cable Using LMR-195 Coax with HeatShrink. PE3W07522/HS is a UHF female to Mini UHF male cable using LMR-195 coax. This Pasternack UHF female to Mini UHF male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our female UHF to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07522/HS UHF female to Mini UHF male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W07535

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-200 Coax. PE3W07535 is a TNC male to TNC male cable using LMR-200 coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07535 TNC male to TNC male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.