038KVD-R Price, Reseller, Stock

Automotive Qualified, Grade2 (-40 C +105 C), Integrated 3-Axis MEMS Gyroscope DeviceAutomotive Qualified, Grade2 (-40 C +105 C), Integrated 3-Axis MEMS Gyroscope Device

1 : $7.2

AIUR-03-821J

Abracon Corporation

RoHS : Compliant

1 : $0.33

AISC-Q0603-8N7K-T

Abracon Corporation

RoHS : Compliant

1 : $0.06

IAM-20380

TDK Invensense

3-axis gyroscopeScheduled to be released in Q1 2019 SM101918
RoHS : Compliant

1 : $10.87

ACMP-7038-102-T

Abracon Corporation

RoHS : Compliant

1 : $0.6

AIML-0603-82NK-T

Abracon Corporation

RoHS : Compliant

1 : $0.02

ACMP-7038-272-T

Abracon Corporation

RoHS : Compliant

1 : $0.6

CAB.6038

Taoglas Antenna Solutions

Coaxial Cable MHF1 to RP-SMA, 11.8" Length

1 : $3.63

410383

Septentrio NV

AsteRx SBi3 Pro

1 : $6,270.0

AIAP-03-821K

Abracon Corporation

RoHS : Compliant

1 : $0.62

AISC-Q0603-8N2K-T

Abracon Corporation

RoHS : Compliant

1 : $0.06

33-4422AT-03-800

Calian

Pre-filtered GPS L1 / GLN G1

1 : $52.99

AIMC-0603-8N2J-T

Abracon Corporation

RoHS : Compliant

1 : $0.02

1003893FT-AA10L0100

Kyocera AVX Components

BT Tunable PCB 2.4 GHz EmbeddedAntenna
RoHS : Compliant

1 : $2.5
10 : $2.25

ASPI-0403-821K-T

Abracon Corporation

RoHS : Unknown

1 : $0.55

DB Roberts

13RS038038

Essentra Components

ROUND SPACER, .320 ID, .380 OD

13RS038038B

Essentra Components

ROUND SPACER, .320 ID, .380 OD

PCWA-0381-038

Essentra Components

FCWA-0381-038

Essentra Components

D5-PR35X865H038NA

Southco

D5-PR35X865H038NA

CN-80-3-8

Southco

These robust modules satisfy requirements of the AdvancedTCA� Base Specification for telecom applications including the drop test without additional support components. And multiple keying configurations provide any plug-in circuit board application wit

71210-03800

Avdel

INTENSIFIER SEAL ASSEMBLY

900381

Essentra Components

SH-50-038-5013

SHEREX FASTENING SO

47-10-384-10

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

T1084-2.5C038S

HeliCoil

13ME038

Essentra Components

ROUND SPACER, 3.2MM ID, 8MM OD

13RS038034

Essentra Components

ROUND SPACER, .328 ID, .384 OD

13RS089038

Essentra Components

ROUND SPACER, .780 ID, .907 OD

1440385

Essentra Components

EBV Elektronik

XMC1302T038X0064ABXUMA3

Infineon Technologies AG

ARM MCU 32bit ARM CortexM0 32 MHz 64 KB 16 KB 38 Pins TSSOP (Alt: SP001720076)
RoHS : Compliant

39,000

IPD038N06NF2SATMA1

Infineon Technologies AG

Power MOSFET N Channel 60 V 120 A 385 Milliohms TO252 DPAK 3 Pins Surface Mount (Alt: SP005588983)
RoHS : Compliant

4,000

DCP-END030/1-PC800-38

Luminus Devices

ACDC LED Driver 304 W 38 V 800 mA Constant Current 220 VAC to 240 VAC (Alt: DCP-END030/1-PC800-38)
RoHS : Compliant

1,100

B0388

ArduCam

Arducam 16MP IMX519 Autofocus Synchronized QuadCamera Kit (Alt: B0388)
RoHS : Compliant

2N5038

Microchip Technology Inc

(Alt: 2N5038)
RoHS : Compliant

TSSP77038TR

Vishay Intertechnologies

IR Sensor IC 38kHz e3 (Alt: TSSP77038TR)
RoHS : Compliant

SGM8038-1XN5G/TR

SG Micro Corp

(Alt: SGM8038-1XN5G/TR)
RoHS : Compliant

SGM8038-2XN8G/TR

SG Micro Corp

(Alt: SGM8038-2XN8G/TR)
RoHS : Compliant

XMC1301T038F0032ABXUMA1

Infineon Technologies AG

(Alt: SP001248372)
RoHS : Compliant

XMC1402T038X0064AAXUMA1

Infineon Technologies AG

32Bit XMC1000 Industrial Microcontroller ARM (Alt: SP001598268)
RoHS : Compliant

XMC1201T038F0128ABXUMA1

Infineon Technologies AG

MCU 32Bit XMC1000 ARM Cortex M0 RISC 128KB Flash 33V5V 38Pin TSSOP TR (Alt: SP001344608)
RoHS : Compliant

XMC1100T038F0016ABXUMA1

Infineon Technologies AG

(Alt: SP001337850)
RoHS : Compliant

XMC1402T038X0032AAXUMA1

Infineon Technologies AG

32Bit XMC1000 Industrial Microcontroller ARM (Alt: SP001598266)
RoHS : Compliant

XMC1302T038X0064ABXUMA1

Infineon Technologies AG

(Alt: SP001337864)
RoHS : Compliant

DIT-END017/1-PC450-38-CW

Luminus Devices

LED Driver Module 1CH 275mA300mA325mA350mA375mA400mA425mA450mA 30V to 38V 17W White Wire Le (Alt: DIT-END017/1-PC450-38-CW)
RoHS : Compliant

ECCO

102-0383-000

ITT Interconnect Solutions

1 : $30.38

333

1020385000

ITT Interconnect Solutions

5 : $24.5

245

102-0385-000

ITT Interconnect Solutions

5 : $24.5

245

1020386000

ITT Interconnect Solutions

1 : $37.52

237

102-0382-000

ITT Interconnect Solutions

5 : $24.36

225

1020382000

ITT Interconnect Solutions

5 : $24.36

225

93-830389-10P

Amphenol Industrial Operations

1 : $26.49

108

102-0380-000

ITT Interconnect Solutions

5 : $15.14

1020384000

ITT Interconnect Solutions

5 : $22.8

102-0384-000

ITT Interconnect Solutions

5 : $22.8

19070-0038

Molex

RoHS : Compliant

1 : $0.1824

0190700038

Molex

RoHS : Compliant

1 : $0.218

103-0382-000

ITT Interconnect Solutions

5 : $9.72

103-0389-000

ITT Interconnect Solutions

1 : $6.006

1030389000

ITT Interconnect Solutions

1 : $6.006

Pasternack Enterprises US

PE3C10389-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195-FR, RF Cable Type: TCOM-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated N Male to SMA Male Low Loss Cable 24 Inch Length Using TCOM-195-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to SMA male low loss cable 24 inch length using TCOM-195-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable 24 inch length using TCOM-195-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10389-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10389-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to SMA plug cable assembly PE3C10389-24 is built with TCOM-195-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10389-24 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements.

1 : $123.99
25 : $119.03
50 : $115.31
100 : $112.83

2,206

PE3W03860/HS-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Female to MCX Plug Right Angle Cable 48 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female to MCX plug right angle cable 48 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to MCX plug right angle cable 48 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. This SMA to MCX cable is a female to plug coax assembly, PE3W03860/HS-48, can also be known as a SMA jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA jack to MCX male cable assembly PE3W03860/HS-48 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03860/HS-48 can also be used in the other direction and will be right angle MCX plug to SMA female cable assembly if the opposite connectivity is required. SMA jack to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to MCX plug right angle cable 48 inch length using PE-SR405FLJ coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

182

PE3W04038LF-48

Pasternack Enterprises

1 : $297.99
25 : $283.09
50 : $268.19
100 : $256.27

PE3M0380-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 16, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 16, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 16 Contact Pin to MIL Size 16 Contact Pin Cable 6 Inch Length Using M17/113-RG316 Coax with HeatShrink, LF Solder. The PE3M0380-6 from Pasternack is a D38999 contact cable assembly that is built with a size 16 M39029 pin contact connection on one end and a M39029 pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0380-6 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0380-6 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 pin to M39029 pin cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0380-6 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.

1 : $119.99
10 : $115.19
25 : $110.39
100 : $105.59

PE3W03872/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to SMA Male Right Angle Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male right angle low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male right angle low loss cable 12 inch length using LMR-195 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA bulkhead cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W03872/HS-12 can also be known as a low loss SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W03872/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03872/HS-12 can also be used in the other direction and will be right angle SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA male right angle low loss cable 12 inch length using LMR-195 coax with heatshrink.

1 : $159.99
25 : $151.99
50 : $143.99
100 : $137.59

PE15A4038

Pasternack Enterprises

Key Specifications, Power Output: 24 dBm P1dB, Frequency, Min: 500 MHz, Frequency, Max: 2 GHz, Gain, Min: 13 dB, Gain, Typical: 14 dB, 3rd Intercept Point: 34 dB, Connector Series: SMA. 24 dBm P1dB, 500 MHz to 2 GHz, Medium Power Broadband Amplifier, 14 dB Gain, 34 dBm IP3, 2.7 dB NF, SMA. PE15A4038 medium power broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized medium power broadband amplifier uses SMA connectors at 50 Ohm. This SMA broadband amplifier has wide-band capability with a minimum frequency of 500 MHz and maximum frequency of 2 GHz. The minimum gain of this broad-band radio frequency amplifier is 13 dB with a typical gain of 14 dB. Pasternack broadband amplifier PE15A4038 is rated at 24 dBm P1dB. Our broad band radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $935.0
5 : $897.6
10 : $860.2

PEWCT1038

Pasternack Enterprises

1 : $2,120.0
5 : $2,035.2
10 : $1,950.4

PE39038-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male Right Angle to QN Male Right Angle Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly N male right angle to QN male right angle cable 48 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to QN male right angle cable 48 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and right angle QN cable connection on the other. Our right angle type N to right angle QN cable assembly has male gender on end 1 and male on end 2. PE39038-48 can also be known as a right angle type N plug to right angle QN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Type N plug to QN plug cable assembly PE39038-48 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle QN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE39038-48 RF cable are available on our downloadable PDF datasheet.PE39038-48 can also be used in the other direction and will be right angle QN male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to QN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements.

1 : $163.99
25 : $155.79
50 : $147.59
100 : $141.03

PE3C0038-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Male Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA male cable 60 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA male cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C0038-60, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C0038-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 60 inch length using LMR-195 coax.

1 : $84.99
25 : $80.74
50 : $76.49
100 : $73.09

PE3C9038

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. TNC Female to TNC Female Cable Using PE-SR402AL Coax. PE3C9038 is a TNC female to TNC female cable using PE-SR402AL coax. This Pasternack TNC female to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC to female TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9038 TNC female to TNC female cable assembly is constructed with PE-SR402AL coax.

PE3M0381-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Pin to MIL Size 8 Contact Pin Cable 36 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0381-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 pin contact connection on one end and a M39029 pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0381-36 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0381-36 in-series RF cable has 0.8 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 pin to M39029 pin cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0381-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.

1 : $141.99
10 : $136.31
25 : $130.63
100 : $124.95

PE3W03821/HS

Pasternack Enterprises

PE3W03874LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 1.85mm Male to 1.85mm Male Cable Using Tinned RG405 Coax with HeatShrink, LF Solder. PE3W03874LF/HS is a 1.85mm male to 1.85mm male cable using RG405 Tinned coax. This Pasternack 1.85mm male to 1.85mm male cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our male 1.85mm to male 1.85mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03874LF/HS 1.85mm male to 1.85mm male cable assembly is constructed with RG405 Tinned coax.

PE3W09038LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMA Male Cable Using RG174 Coax, LF Solder. PE3W09038LF is a N male right angle to SMA male cable using RG174 coax. This Pasternack N male right angle to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09038LF N male right angle to SMA male cable assembly is constructed with RG174 coax.

PE3W20381

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 3.5mm Male to 3.5mm Female Cable Using PE-047SR Coax. PE3W20381 is a 3.5mm male to 3.5mm female cable using PE-047SR coax. This Pasternack 3.5mm male to 3.5mm female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male 3.5mm to female 3.5mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20381 3.5mm male to 3.5mm female cable assembly is constructed with PE-047SR coax.