031B2-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to N Male Low Loss Cable 12 Inch Length Using LMR-400-DB Coax With Times Microwave Parts., Radio frequency assembly N male right angle to N male low loss cable 12 inch length using LMR-400-DB coax with Times Microwave parts from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 12 inch length using LMR-400-DB coax with Times Microwave parts, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and N type cable connection on the other. Our low loss right angle type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3W08603-12, can also be known as a low loss right angle N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W08603-12 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08603-12 can also be used in the other direction and will be N type male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male low loss cable 12 inch length using LMR-400-DB coax with Times Microwave parts.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

862

PE3M0031-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 BNC Male to N Female Cable 60 Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 BNC male to N female cable 60 length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to N female cable 60 length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/02-0503 type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and M39012/02-0503 N type cable connection on the other. Our M39012/16-0014 BNC to M39012/02-0503 type N cable assemblies have a male gender on end 1 and female on end 2. This M39012/16-0014 BNC to M39012/02-0503 N type cable is a male to female coax assembly, PE3M0031-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to M39012/02-0503 type N jack cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/02-0503 type N jack cable assembly PE3M0031-60 is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to M39012/02-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/02-0503 N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0031-60 can also be used in the other direction and will be M39012/02-0503 type N female to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/02-0503 N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/02-0503 type N cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to N female cable 60 length using M17/84-RG223 coax.

1 : $353.99
25 : $336.29
50 : $318.59

PE3M0312-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Female Cable 6 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0312-6 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0312-6 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0312-6 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMA pin to SMA female cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0312-6 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements.

1 : $130.99
10 : $125.75
25 : $120.51
100 : $115.27

PE3M0310-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Female Cable 24 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0310-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0310-24 between-series RF cable has 0.78 inches of repeated minimum bend radius. BMA pin to SMA female cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0310-24 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements.

1 : $132.99
10 : $127.67
25 : $122.35
100 : $117.03

PE3M0316-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Female Cable 6 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0316-6 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0316-6 between-series RF cable has 0.78 inches of repeated minimum bend radius. BMZ pin to SMA female cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0316-6 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements.

1 : $269.99
10 : $259.19
25 : $248.39
100 : $237.59

PE3C10313/HS-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 10-32 Male to SMA Female Cable 6 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly 10-32 male to SMA female cable 6 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10-32 male to SMA female cable 6 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 10-32 cable connection on one end and a SMA cable connection on the other. Our 10-32 to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C10313/HS-6 can also be known as a 10-32 plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10313/HS-6 RF cable has a FEP jacket of 0.114-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. Our 10-32 male to SMA female cable has a maximum VSWR of 1.5:1. 10-32 plug to SMA jack cable assembly PE3C10313/HS-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10313/HS-6 can also be used in the other direction and will be a SMA female to 10-32 male cable assembly if the opposite connectivity is required. 10-32 plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to SMA cable assembly for quick shipment worldwide. Variations of 10-32 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to SMA RF cable assembly as per your requirements.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

PE3C4031-6

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 6 inches. Snap-On MMBX Plug to Snap-On MMBX Plug Cable 6 Inch Length Using RG174 Coax., Radio frequency assembly snap-on MMBX plug to snap-on MMBX plug cable 6 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to snap-on MMBX plug cable 6 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to MMBX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and MMBX cable connection on the other. Our MMBX to MMBX cable assemblies have a plug gender on end 1 and plug on end 2. This MMBX to MMBX cable is a plug to plug coax assembly, PE3C4031-6, can also be known as a MMBX male to MMBX male cable assembly and will be shipped same-day as it is purchased. MMBX male to MMBX male cable assembly PE3C4031-6 is built with RG174 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to MMBX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MMBX plug to MMBX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMBX male to MMBX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to MMBX cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to snap-on MMBX plug cable 6 inch length using RG174 coax.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE3C5031

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to Straight Cut Lead Cable Using LMR-100 Coax., Radio frequency assembly TNC female bulkhead to straight cut lead cable using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to straight cut lead cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to Straight Cut Lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and Straight Cut Lead cable connection on the other. Our TNC to Straight Cut Lead cable assemblies have a female gender on end 1 and sexless on end 2. This TNC to Straight Cut Lead cable is a female to sexless coax assembly, PE3C5031, can also be known as a TNC jack to Straight Cut Lead sexless cable assembly and will be shipped same-day as it is purchased. TNC jack to Straight Cut Lead sexless cable assembly PE3C5031 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to Straight Cut Lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC female bulkhead to Straight Cut Lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5031 can also be used in the other direction and will be Straight Cut Lead sexless to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to Straight Cut Lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to Straight Cut Lead cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to straight cut lead cable using LMR-100 coax.

PE3W03127

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to Water Blue FAKRA Jack Right Angle Cable Using RG316 Coax. PE3W03127 is a SMA male to FAKRA jack right angle cable using RG316 coax. This Pasternack SMA male to FAKRA jack right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. SMA to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03127 SMA male to FAKRA jack right angle cable assembly is constructed with RG316 coax.

PE3W03172

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-240 Coax. PE3W03172 is a TNC male to TNC male cable using LMR-240 coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03172 TNC male to TNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W03178LF

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm N Female Cable Using 75 Ohm RG59 Coax, LF Solder. PE3W03178LF is a F male to N female cable using RG59 coax. This Pasternack F male to N female cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm N for connector 2. Our male F to female N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W03178LF F male to N female cable assembly is constructed with RG59 coax.

PE3W03803-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male to 7/16 DIN Male Low Loss Cable 150 CM Length Using LMR-400 Coax., Radio frequency assembly N male to 7/16 DIN male low loss cable 150 cm length using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to 7/16 DIN male low loss cable 150 cm length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low loss N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3W03803-150CM, can also be known as a low loss N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3W03803-150CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03803-150CM can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male low loss cable 150 cm length using LMR-400 coax.

1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35

PE34503-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMC Plug to SMC Jack Bulkhead Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SMC plug to SMC jack bulkhead cable 12 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC jack bulkhead cable 12 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and SMC bulkhead cable connection on the other. Our SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE34503-12, can also be known as a SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE34503-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMC plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34503-12 can also be used in the other direction and will be SMC jack bulkhead to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC jack bulkhead cable 12 inch length using RG58 coax.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE3C8003-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Male to NEX10 Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-12 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $104.99
25 : $99.74
50 : $94.49
100 : $90.29

PE3M0313-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMB, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P141, RF Cable Type: Coax, RF Cable Specification: PE-P141 datasheet, RF Cable Impedance : 50 Ohm. BMB Size 8 D38999 Contact Pin to SMA Female Cable 36 Inch Length Using PE-P141 Coax with HeatShrink, LF Solder. The PE3M0313-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMB pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMB to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0313-36 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMB pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMB pin to SMA female cable assembly is built with PE-P141, which is a flexible coax type. The Pasternack PE3M0313-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMB to SMA RF cable are available on our downloadable PDF datasheet. BMB pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMB and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMB to SMA RF cable assembly as per your requirements.

1 : $271.99
10 : $261.11
25 : $250.23
100 : $239.35

Teledyne HiRel

M38510/31602BEA

Teledyne HiRel

LATCH, RS, 4-BIT
RoHS : Not Compliant

M38510/31002BDA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT, WITH OPEN-COLLECTOR INPUTS
RoHS : Not Compliant

M38510/31506BEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

M38510/31101B2A

Teledyne HiRel

MAGNITUDE COMPARATOR, 4-BIT
RoHS : Not Compliant

M38510/31005BDA

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/31504BFA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS
RoHS : Not Compliant

M38510/31901BEA

Teledyne HiRel

M38510/31506BFA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

M38510/31004BAA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/31603B2A

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

M38510/31005B2C

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS

M38510/31603BXA

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

M38510/31603BFA

Teledyne HiRel

LATCH, 8-BIT ADDRESSABLE
RoHS : Not Compliant

M38510/31002BAA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT, WITH OPEN-COLLECTOR INPUTS
RoHS : Not Compliant

M38510/31504BEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS
RoHS : Not Compliant

Venkel Ltd.

UPTF0603-16W-N-2031AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.03K;�0.05%
RoHS : Compliant

UPTF0603-16W-N-2031DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.03K;�0.5%
RoHS : Compliant

TFCR0603-16W-E-2031FT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;2.03K;�1%
RoHS : Compliant

TFCR0603-16W-E-2031DT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;2.03K;�0.5%
RoHS : Compliant

UPTF0603-16W-P-2031AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;2.03K;�0.05%
RoHS : Compliant

UPTF0603-16W-N-2031BT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.03K;�0.1%
RoHS : Compliant

UPTF0603-16W-N-2031UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.03K;�0.01%
RoHS : Compliant

UPTF0603-16W-P-2031CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;2.03K;�0.25%
RoHS : Compliant

TFCR0603-10W-E-2031BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;2.03K;�0.1%
RoHS : Compliant

TFCR0603-16W-K-2031CT

VENKEL LTD

Thin Film CR;0603;1/16W;�100PPM;2.03K;�0.25%
RoHS : Compliant

TFCR0603-16W-E-2031BT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;2.03K;�0.1%
RoHS : Compliant

TFCR0603-10W-E-2031DT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;2.03K;�0.5%
RoHS : Compliant

TFCR0603-16W-K-2031DT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�100PPM;2.03K;�0.5%
RoHS : Compliant

UPTF0603-16W-N-2031AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.03K;�0.05%
RoHS : Compliant

UPTF0603-16W-E-2031AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�25PPM;2.03K;�0.05%
RoHS : Compliant

Vyrian

11_SMA-50-3-15/111_NH

Huber+suhner Ag

RF SMA Connector, 1 Contact(s), Male, Cable Mount, Solder Terminal, Locking, Plug

13,058

PSR031DL0315Z

Littelfuse Inc

Electric Fuse, Fast Blow, 315A, 700VAC, 600VDC, 200000A (IR), Inline/holder
RoHS : Compliant

12,706

10112684-F03-10ULF

Amphenol Communications Solutions

Board Connector, 10 Contact(s), 1 Row(s), Male, Right Angle, 0.079 inch Pitch, Surface Mount Terminal, Black Insulator

12,124

PSR031DS0315Z

Littelfuse Inc

Electric Fuse, Fast Blow, 315A, 700VAC, 600VDC, 200000A (IR), Inline/holder
RoHS : Compliant

11,398

1201080310

Molex

Cable Assembly
RoHS : Compliant

10,892

PSR031FL0315Z

Littelfuse Inc

Electric Fuse, Fast Blow, 315A, 700VAC, 600VDC, 200000A (IR), Inline/holder
RoHS : Compliant

9,559

2203160

Phoenix Contact

Enclosures/Accessories
RoHS : Compliant

8,604

PSR031US0315Z

Littelfuse Inc

Electric Fuse, Fast Blow, 315A, 700VAC, 600VDC, 200000A (IR), Inline/holder
RoHS : Compliant

8,584

2200316

Phoenix Contact

Barrier Strip Terminal Block, 22A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

8,567

37403150430

Littelfuse Inc

Electric Fuse, Time Lag Blow, 0.315A, 250VAC, 50A (IR), Through Hole, TR5
RoHS : Compliant

7,160

PSR031UL0315Z

Littelfuse Inc

Electric Fuse, Fast Blow, 315A, 700VAC, 600VDC, 200000A (IR), Inline/holder
RoHS : Compliant

6,635

PSR031FS0315Z

Littelfuse Inc

Electric Fuse, Fast Blow, 315A, 700VAC, 600VDC, 200000A (IR), Inline/holder
RoHS : Compliant

6,142

2297031

Phoenix Contact

Contactors/Accessories
RoHS : Compliant

3,993

1625F031

Broadcom Limited

3,356

135104-03-12.00

Amphenol Corporation

Interconnection Device
RoHS : Compliant

797

Waytek, Inc.

22CC50D0312

Essentra Components

5/16" Nylon Cable Clamp Natural Size 10 Stud 1/2" Wide

100 : $0.1768
200 : $0.1481
500 : $0.1258
1,000 : $0.1179
5,000 : $0.1062

3,828

22CC50D0312B

Essentra Components

5/16" Nylon Cable Clamp Black Size 10 Stud 1/2" Wide

100 : $0.1286
200 : $0.1235
500 : $0.1196
1,000 : $0.1132
5,000 : $0.1093

2,490

282103-1

TE Connectivity

1 Position Cap Housing AMP Superseal 1.5mm
RoHS : Compliant

1 : $1.169
10 : $1.1022
50 : $1.0354
100 : $0.9886
200 : $0.9619
500 : $0.9352

544

C01620D00311012

Amphenol Sine Systems

Amphenol Sine Systems C01620D00311012 ecomate plastic female straight cable connector has 3+PE contacts, screw termination, and internal cable clamping. Rated 16A at 400V with IP65/IP67 sealing, it uses a black backshell and 6-12.5 mm cable range.

1 : $12.72
5 : $11.88
10 : $10.66
50 : $10.28
100 : $9.75
200 : $9.59

456

187030F-03-1

Eaton Electronics

Marine Rate Circuit Breaker SURFACE MOUNT 30 AMP MULT 20 MIN 20

1 : $64.29
5 : $60.57
10 : $58.55
20 : $56.86
50 : $55.84
100 : $53.12

124-903 124-114111

White-Rodgers

Power Relay Contactor 24V 100A SPNO White-Rodgers 124-903 400A INRUSH ISOLATED COIL

1 : $59.12
5 : $55.7
10 : $53.98
50 : $51.41
100 : $48.84

4300-3129

Pressmaster AB

DIE SET FOR 22-14 GA INSULATED FOR 560 CRIMPER

1 : $47.16
10 : $44.62

187120P-03-1

Eaton Electronics

120A Marine Circuit Breaker Panel Mount 187120P-03-1 ABYC E-11, CE, SAE J1171

1 : $54.07
5 : $50.94
10 : $49.24
20 : $47.82
50 : $46.96
100 : $44.68

8031B

Egis Mobile Electric

RT Fuse Block, 18 POS w/Ground & LED Indication, Bulk

1 : $116.04
5 : $108.6
10 : $101.67
25 : $97.2
50 : $93.23

187100F-03-1

Eaton Electronics

100A Marine Circuit Breaker Surface Mount 187100F-03-1 ABYC E-11, CE, SAE J1171

1 : $54.02
5 : $50.89
10 : $49.18
20 : $47.77
50 : $46.91
100 : $44.64

77031N02

VTE Incorporated

Junction Block Stud Red 1 Stud Thread 5/16-18 250A 47225

1 : $5.1667
50 : $4.318
100 : $3.7713
200 : $3.5262
500 : $3.3942

301-1A-C-R1 U03 12VD

Song Chuan Precision Company

Song Chuan ISO 280 Micro Relay 35A 12V SPST Resistor Poss Repl 74660 (Waytek DISC)

1 : $3.8657
50 : $3.598
100 : $3.4122
500 : $3.2063
1,000 : $3.0932
2,500 : $2.918

19164-0314

Molex

Perma-Seal Bullet Connector Reel, Male, 16-14 Ga, Heat Shrink Insulated, Mylar Tape
RoHS : Compliant

500 : $0.5745
2,500 : $0.519

187040F-03-1

Eaton Electronics

Marine Rate Circuit Breaker Surface Mount 40A, ABYC E-11 CE, Case J1171

1 : $55.69
5 : $52.47
10 : $50.72
20 : $49.25
50 : $48.37
100 : $46.02

187030P-03-1

Eaton Electronics

Marine Rated Circuit Breaker PANEL MOUNT 30AMP MIN 20 PACK QTY 20

1 : $55.69
5 : $52.47
10 : $50.72
20 : $49.25
50 : $48.37
100 : $46.02

Win Source Electronics

ESDL031-1BF4

STMicroelectronics

TVS DIODE 3.3VWM 7VC ST0201
RoHS : Compliant

10,990 : $0.0273
8,225 : $0.0304
6,350 : $0.0315
4,620 : $0.0325
2,980 : $0.0336
1,225 : $0.0409

85,000

TPS63031DSKT

Texas Instruments

HIGH EFFICIENCY SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 1-A SWITCHES
RoHS : Compliant

460 : $0.6573
370 : $0.684
285 : $0.7107
200 : $0.7642
130 : $0.7909
60 : $0.8443

83,250

NCP1031MNTXG

onsemi

IC CTRLR PWM OTP OVD HV 8DFN
RoHS : Compliant

560 : $0.5358
420 : $0.5976
325 : $0.6182
235 : $0.6388
155 : $0.6594
65 : $0.8037

75,000

9H03200031

TXC Corporation

CRYSTAL 32.768KHZ 12.5PF SMD
RoHS : Compliant

1,610 : $0.1864
1,290 : $0.194
995 : $0.2016
695 : $0.2167
450 : $0.2243
210 : $0.2394

60,000

AR8031-AL1B

Qualcomm

IC TRANSCEIVER ETHERNET 48-QFN / PHY 10Mbps/100Mbps/1Gbps 3.3V 48-Pin QFN EP Tray

106 : $2.8561
79 : $3.1857
61 : $3.2955
45 : $3.4054
29 : $3.5152
12 : $4.2841

23,400

KSZ9031RNXIA TR

Micrel Inc

77 : $3.9137
62 : $4.0728
48 : $4.2319
33 : $4.55
22 : $4.7091
10 : $5.0273

13,940

RZ03-1A4-D012

TE Connectivity

RELAY GEN PURPOSE SPST 16A 12V

91 : $3.302
68 : $3.6829
53 : $3.8099
39 : $3.9369
25 : $4.0639
11 : $4.9529

10,000

0312001.MXP

Littelfuse Inc

FUSE GLASS 1A 250VAC 3AB 3AG / 1 A 250 V AC DC Fuse Cartridge, Glass Holder 3AB, 3AG, 1/4" x 1-1/4"
RoHS : Compliant

3,500 : $0.0858
2,615 : $0.0957
2,025 : $0.099
1,470 : $0.1023
950 : $0.1056
390 : $0.1287

8,813

QM77031TR13-5K

Qorvo

MHB S-PAD
RoHS : Compliant

370 : $0.9164
275 : $1.0221
215 : $1.0573
155 : $1.0926
100 : $1.1278
45 : $1.3745

6,200

MT9P031I12STC

onsemi

SENSOR IMAGE COLOR CMOS 48-LCC / Image Sensor Color CMOS 2592x1944Pixels 48-Pin ILCC
RoHS : Compliant

9 : $39.1164
7 : $43.6299
5 : $45.1344
4 : $46.6388
3 : $48.1433
1 : $58.6747

5,588

CRCW06031K00FKEAC

Vishay Huntington

RES 1K OHM 1% 1/10W 0603 / 1 kOhms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Thick Film

36,590 : $0.0082
27,475 : $0.0091
21,055 : $0.0095
15,310 : $0.0098
9,905 : $0.0101
4,070 : $0.0123

3,862

IPS6031RPBF

Vishay Huntington

Current Limit Switch High Side

84 : $4.6714
63 : $5.2104
48 : $5.3901
35 : $5.5698
23 : $5.7493
10 : $7.0069

3,680

AR8031-AL1A

Qualcomm

IC TRANSCEIVER ETHERNET 48-QFN

14 : $22.3637
11 : $23.2728
9 : $24.1819
6 : $26.0
4 : $26.9091
2 : $28.7273

3,000

PI90LV031ALEX

Diodes Incorporated

IC LVDS LINE DVR QUAD 16TSSOP
RoHS : Compliant

129 : $2.6078
97 : $2.9088
75 : $3.009
55 : $3.1093
35 : $3.2096
15 : $3.9117

2,140

KLM8G1WEMB-B031

Samsung Electronics Co. Ltd

8GB eMMC5.0

13 : $26.0776
10 : $29.0866
8 : $30.0896
6 : $31.0925
4 : $32.0956
2 : $39.1164

494

Wuhan P&S

TNPW0603100KBEEA

Vishay Intertechnologies

Film chip resistance 100 k �� 0.1% 0.1W
RoHS : Compliant

1 : $0.99
100 : $0.33
500 : $0.31
1,000 : $0.3

360,000

CRCW060315R0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors
RoHS : Compliant

1 : $0.16
100 : $0.06
500 : $0.05
1,000 : $0.05

100,000

TNPW06031K00BEEA

Vishay Intertechnologies

High Stability Thin Film Flat Chip Resistors
RoHS : Compliant

1 : $0.99
100 : $0.33
500 : $0.31
1,000 : $0.3

70,000

CRCW06031K10FKEA

Vishay Intertechnologies

RoHS : Compliant

1 : $0.07
100 : $0.03
500 : $0.02
1,000 : $0.02

50,000

CRCW0603100RFKEA

Vishay Intertechnologies

RoHS : Compliant

1 : $0.07
100 : $0.03
500 : $0.02
1,000 : $0.02

45,000

CRCW0603180KFKEAHP

Vishay Intertechnologies

CRCW0603-HP 100 180K 1% ET1 E3
RoHS : Compliant

1 : $0.16
100 : $0.06
500 : $0.05
1,000 : $0.05

45,000

CRCW060312K7FKEAHP

Vishay Intertechnologies

CRCW0603-HP 100 12K7 1% ET1 E3
RoHS : Compliant

1 : $0.16
100 : $0.06
500 : $0.05
1,000 : $0.05

30,000

NCP303152MNTWG

onsemi

Integrated Driver and MOSFET with Integrated Current Monitor
RoHS : Compliant

1 : $4.94
100 : $3.15
500 : $2.6
1,000 : $2.39

18,000

TNPW060310K0DEEA

Vishay Intertechnologies

High Stability Thin Film Flat Chip Resistors,10K�� 0.5% 0.21W
RoHS : Compliant

1 : $0.4
100 : $0.14
500 : $0.13
1,000 : $0.12

10,000

NVNJWS200N031LTAG

onsemi

30V,3.3A,N-Channel Power MOSFET,
RoHS : Compliant

1 : $0.45
100 : $0.29
500 : $0.24
1,000 : $0.22

6,000

CRCW060310R0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors
RoHS : Compliant

1 : $0.16
100 : $0.06
500 : $0.05
1,000 : $0.05

5,000

CRCW0603180KFKEA

Vishay Intertechnologies

Standard Thick Film Chip Resistors
RoHS : Compliant

1 : $0.07
100 : $0.03
500 : $0.02
1,000 : $0.02

5,000

NJV4031NT1G

onsemi

Bipolar Power Transistors NPN Silicon
RoHS : Compliant

1 : $0.49
100 : $0.32
500 : $0.26
1,000 : $0.24

2,000

NUCLEO-G031K8

STMicroelectronics

1 : $69.82
100 : $23.28
500 : $21.53
1,000 : $20.95

STM32G031C8T6

STMicroelectronics

STM32G0x1 advanced ARM-based 32b MCUs
RoHS : Compliant

1 : $1.13
100 : $1.13
500 : $1.13
1,000 : $1.13

031B2-R Reseller

Enlace URL