006-H4SPTM-R Price, Reseller, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: WMCX 1.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Female Bulkhead to WMCX 1.6 Plug Cable 3 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to WMCX 1.6 plug cable 3 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to WMCX 1.6 plug cable 3 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to WMCX 1.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and WMCX 1.6 cable connection on the other. Our SMA to WMCX 1.6 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to WMCX 1.6 cable is a female to plug coax assembly, PE3CA1006-3, can also be known as a SMA jack to WMCX 1.6 male cable assembly and will be shipped same-day as it is purchased. SMA jack to WMCX 1.6 male cable assembly PE3CA1006-3 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to WMCX 1.6 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female bulkhead to WMCX 1.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1006-3 can also be used in the other direction and will be WMCX 1.6 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to WMCX 1.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to WMCX 1.6 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to WMCX 1.6 plug cable 3 inch length using 0.81mm coax, RoHS.

1 : $20.39
25 : $19.37
50 : $18.35
100 : $17.54

167

PE3C100069

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Low Loss Test Cable Using PE-TC154A Coax., Pasternack’s PE3C100069 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100069 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100069 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C100069 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

PE3MSA00654-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB 3-Slot, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB 3-Lug, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Insulated Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWC-124-2, RF Cable Type: TWC-124-2, RF Cable Impedance: 124 Ohm, Length, Max: 36 inches. TRB 3-Slot Plug to TRB 3-Lug Jack Insulated Bulkhead 1553 Cable 36 Inch Length Using 124 Ohm TWC-124-2 Coax., Radio frequency assembly TRB 3-Slot plug to TRB 3-Lug jack insulated bulkhead 1553 cable 36 inch length using 124 Ohm TWC-124-2 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-STD-1553 coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot plug to TRB 3-Lug jack insulated bulkhead 1553 cable 36 inch length using 124 Ohm TWC-124-2 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB 3-Slot to TRB 3-Lug cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB 3-Slot cable connection on one end and TRB 3-Lug insulated bulkhead cable connection on the other. Our 1553 TRB 3-Slot to TRB 3-Lug cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00654-36 can also be known as a MIL-STD-1553 1553 TRB 3-Slot male to TRB 3-Lug female cable assembly and will be shipped same-day as it is purchased. TRB 3-Slot male to TRB 3-Lug female cable assembly PE3MSA00654-36 is built with TWC-124-2 which is a flexible twinax type. The Pasternack flexible TRB 3-Slot cable assembly is manufactured with TRB 3-Slot to TRB 3-Lug cable connectors, has a 78 Ohm impedance. RF specs on this MIL-STD-1553 500 MHz maximum frequency TRB 3-Slot plug to TRB 3-Lug jack insulated bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00654-36 can also be used in the other direction and will be TRB 3-Lug jack insulated bulkhead to TRB 3-Slot plug cable assembly if the opposite connectivity is required. 1553 TRB 3-Slot male to TRB 3-Lug female insulated bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB 3-Slot to TRB 3-Lug cable assembly for quick shipment worldwide. Variations of TRB 3-Slot cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot plug to TRB 3-Lug jack insulated bulkhead 1553 cable 36 inch length using 124 Ohm TWC-124-2 coax.

1 : $317.99
25 : $302.09
50 : $286.19
100 : $273.47

PE3MSA00658

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB 3-Slot, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB 3-Lug, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWC-124-2, RF Cable Type: TWC-124-2, RF Cable Impedance: 124 Ohm. TRB 3-Slot Plug to TRB 3-Lug Jack Bulkhead 1553 Cable Using 124 Ohm TWC-124-2 Coax., Radio frequency assembly TRB 3-Slot plug to TRB 3-Lug jack bulkhead 1553 cable using 124 Ohm TWC-124-2 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-STD-1553 coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot plug to TRB 3-Lug jack bulkhead 1553 cable using 124 Ohm TWC-124-2 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB 3-Slot to TRB 3-Lug cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB 3-Slot cable connection on one end and TRB 3-Lug bulkhead cable connection on the other. Our 1553 TRB 3-Slot to TRB 3-Lug cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00658 can also be known as a MIL-STD-1553 1553 TRB 3-Slot male to TRB 3-Lug female cable assembly and will be shipped same-day as it is purchased. TRB 3-Slot male to TRB 3-Lug female cable assembly PE3MSA00658 is built with TWC-124-2 which is a flexible twinax type. The Pasternack flexible TRB 3-Slot cable assembly is manufactured with TRB 3-Slot to TRB 3-Lug cable connectors, has a 78 Ohm impedance. RF specs on this MIL-STD-1553 500 MHz maximum frequency TRB 3-Slot plug to TRB 3-Lug jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00658 can also be used in the other direction and will be TRB 3-Lug jack bulkhead to TRB 3-Slot plug cable assembly if the opposite connectivity is required. 1553 TRB 3-Slot male to TRB 3-Lug female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB 3-Slot to TRB 3-Lug cable assembly for quick shipment worldwide. Variations of TRB 3-Slot cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot plug to TRB 3-Lug jack bulkhead 1553 cable using 124 Ohm TWC-124-2 coax.

PE3MSA00660-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB 3-Lug, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB 3-Lug, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWC-124-2, RF Cable Type: TWC-124-2, RF Cable Impedance: 124 Ohm, Length, Max: 12 inches. TRB 3-Lug Jack to TRB 3-Lug Jack 1553 Cable 12 Inch Length Using 124 Ohm TWC-124-2 Coax., Radio frequency assembly TRB 3-Lug jack to TRB 3-Lug jack 1553 cable 12 inch length using 124 Ohm TWC-124-2 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-STD-1553 coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack to TRB 3-Lug jack 1553 cable 12 inch length using 124 Ohm TWC-124-2 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB 3-Lug to TRB 3-Lug cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB 3-Lug cable connection on one end and TRB 3-Lug cable connection on the other. Our 1553 TRB 3-Lug to TRB 3-Lug cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00660-12 can also be known as a MIL-STD-1553 1553 TRB 3-Lug female to TRB 3-Lug female cable assembly and will be shipped same-day as it is purchased. TRB 3-Lug female to TRB 3-Lug female cable assembly PE3MSA00660-12 is built with TWC-124-2 which is a flexible twinax type. The Pasternack flexible TRB 3-Lug cable assembly is manufactured with TRB 3-Lug to TRB 3-Lug cable connectors, has a 78 Ohm impedance. RF specs on this MIL-STD-1553 500 MHz maximum frequency TRB 3-Lug jack to TRB 3-Lug jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB 3-Lug female to TRB 3-Lug female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB 3-Lug to TRB 3-Lug cable assembly for quick shipment worldwide. Variations of TRB 3-Lug cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack to TRB 3-Lug jack 1553 cable 12 inch length using 124 Ohm TWC-124-2 coax.

1 : $315.99
25 : $300.19
50 : $284.39
100 : $271.75

PE83CR1006

Pasternack Enterprises

Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 4 GHz, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 0.6 dB, Maximum Input Power: 50 Watts, Minimum Isolation: 18 dB. High Power Circulator With 18 dB Isolation From 4 GHz to 8 GHz, 50 Watts And SMA Female. RF circulator PE83CR1006 from Pasternack is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF circulator is manufactured with SMA connectors that are female. Our SMA circulator has a minimum frequency of 4 GHz and a maximum frequency of 8 GHz. This SMA coaxial circulator has a minimum isolation of 18 dB and a maximum input power of 50 Watts. PE83CR1006 coaxial SMA circulator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency circulator can be bought and shipped worldwide the same-day as with our other in-stock RF parts.
RoHS : Compliant

1 : $835.0
5 : $801.6
10 : $768.2

PETP1006

Pasternack Enterprises

1 : $165.99
10 : $159.35
25 : $152.71

PE71S8006

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 800 MHz, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Maximum Input Power: 75 Watts, Maximum Input VSWR: 1.4:1. SPDT PIN Diode Swtich Operating from 800 MHz to 3 GHz up to 75 Watts (+48.75 dBm) and N Type. PE71S8006 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 800 MHz and a maximum frequency of 3 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of ns and a maximum input power of 75 Watts (+48.8 dBm ). Insertion loss maximum of this SMA Absorptive switch is dB with an isolation minimum of dB. Absorptive PIN diode radio frequency switch PE71S8006 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $3,400.0
5 : $3,264.0
10 : $3,128.0
25 : $2,992.0

PE3MSA00600-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: PLUG, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. LSZH TRB Threaded Plug to 3-Lug TRB Non-Insulated Bulkhead Jack for TWCH-78-2, 60" Twinax Cable., Radio frequency assembly LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 60" twinax cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 60" twinax cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00600-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00600-60 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00600-60 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 60" twinax cable.

1 : $339.99
25 : $322.99
50 : $305.99
100 : $292.39

PE3C10006

Pasternack Enterprises

PE3W00630/HS

Pasternack Enterprises

PE3W00665

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Female to Reverse Polarity SMA Male Right Angl. PE3W00665 is a SMA female to reverse polarity SMA male right angle cable using RG188 coax. This Pasternack SMA female to reverse polarity SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00665 SMA female to SMA reverse polarity male right angle cable assembly is constructed with RG188 coax.

PE3W00695-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to BNC Female Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to BNC female low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC female low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. PE3W00695-200CM can also be known as a low loss SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE3W00695-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency SMA male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00695-200CM can also be used in the other direction and will be BNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female low loss cable 200 cm length using LMR-100 coax.

1 : $61.99
25 : $58.89
50 : $55.79
100 : $53.31

PE3W10060

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SSMB Plug to BNC Female Bulkhead Cable Using RG316-DS Coax. PE3W10060 is a SSMB plug to BNC female bulkhead cable using RG316-DS coax. This Pasternack SSMB plug to BNC female bulkhead cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm BNC for connector 2. Our plug SSMB to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10060 SSMB plug to BNC female bulkhead cable assembly is constructed with RG316-DS coax.

PE3M0006-18

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 18 inches. MIL-DTL-17 BNC Male to SMA Male Right Angle Cable 18 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 BNC male to SMA male right angle cable 18 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to SMA male right angle cable 18 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/16-0014 BNC to right angle M39012/56-3109 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/56-3109 SMA cable is a male to male coax assembly, PE3M0006-18, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/56-3109 SMA plug cable assembly PE3M0006-18 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0006-18 can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to SMA male right angle cable 18 inch length using M17/60-RG142 coax.

1 : $319.99
25 : $303.99
50 : $287.99

Teledyne HiRel

M38510/06006B2C

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

M38510/06006B2A

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

M38510/06006BEA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

M38510/06006BFA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

5962-9221006MFA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9221006M2A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9221006MEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

C0805Z5U500-683MNP

VENKEL LTD

Chip Capacitor;0805;Z5U;50V;0.068uF;�20%
RoHS : Compliant

472,000

C0603C0G500-681JNE

VENKEL LTD

Chip Capacitor;0603;C0G;50V;680pF;�5%
RoHS : Compliant

32,000

C0805X7R500-682JNE

VENKEL LTD

Chip Capacitor;0805;X7R;50V;6800pF;�5%
RoHS : Compliant

12,000

C0603X7R500-682MNP

VENKEL LTD

Chip Capacitor;0603;X7R;50V;6800pF;�20%
RoHS : Compliant

4,000

C0201HQN100-6R9BNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;6.9pF;�0.1pF
RoHS : Compliant

C0201HQN500-6R1BNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;50V;6.1pF;�0.1pF
RoHS : Compliant

C0201HQN500-6R9DNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;50V;6.9pF;�0.5pF
RoHS : Compliant

C0402X7R500-683KNP

VENKEL LTD

Chip Capacitor;0402;X7R;50V;0.068uF;�10%
RoHS : Compliant

C0603C0G500-620FNP

VENKEL LTD

Chip Capacitor;0603;C0G;50V;62pF;�1%
RoHS : Compliant

C0603C0G500-620GNE

VENKEL LTD

Chip Capacitor;0603;C0G;50V;62pF;�2%
RoHS : Compliant

C0603C0G500-6R0DNP

VENKEL LTD

Chip Capacitor;0603;C0G;50V;6pF;�0.5pF
RoHS : Compliant

C0603X7R500-621KNE

VENKEL LTD

Chip Capacitor;0603;X7R;50V;620pF;�10%
RoHS : Compliant

C0805HQN500-6R6CNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;50V;6.6pF;�0.25pF
RoHS : Compliant

TA006TCM475MAR

VENKEL LTD

Tantalum Chip Capacitor;6.3V;TCM;4.7uF;�20%;A
RoHS : Compliant

TA006TCM476KBR

VENKEL LTD

Tantalum Chip Capacitor;6.3V;TCM;47uF;�10%;B
RoHS : Compliant

Win Source Electronics

3-770060-1

TE Connectivity

CONN TERM WTB 14-18AWG TIN / WTB Tin Terminal Connector 14-18 AWG
RoHS : Compliant

10,140 : $0.0296
7,555 : $0.0331
5,850 : $0.0342
4,250 : $0.0353
2,740 : $0.0365
1,130 : $0.0444

195,000

A700D107M006ATE018

KEMET Corporation

ALUMINUM ORGANIC CAPACITORS
RoHS : Compliant

181 : $1.6665
135 : $1.8588
105 : $1.9229
76 : $1.987
49 : $2.0511
21 : $2.4998

40,000

1N4006-E3/54

Vishay Huntington

DIODE GEN PURP 800V 1A DO204AL

4,100 : $0.0732
3,065 : $0.0816
2,370 : $0.0845
1,720 : $0.0873
1,110 : $0.0901
460 : $0.1098

20,400

BQ7692006PWR

Texas Instruments

IC BATT MGMT LI-ION AFE 20TSSOP / 15-Series Cell Battery Monitor Family
RoHS : Compliant

135 : $2.2258
101 : $2.4826
78 : $2.5682
57 : $2.6538
37 : $2.7394
15 : $3.3387

20,118

T55D107M025C0060

Vishay Huntington

CAP TANT POLY 100UF 25V 2917 / 100 µF Molded Tantalum Polymer Capacitor 25 V 2917 (7343 Metric) 60mOhm @ 100kHz

420 : $0.7219
315 : $0.8052
245 : $0.8329
175 : $0.8607
115 : $0.8885
50 : $1.0828

19,000

SI7006-A20-IM

Silicon Laboratories Inc

SENS HUMI/TEMP 3.6V I2C 5% 6DFN
RoHS : Compliant

83 : $4.0728
62 : $4.5427
48 : $4.6993
35 : $4.856
23 : $5.0126
10 : $6.109

16,503

SI7006-A20-IMR

Silicon Laboratories Inc

SENS HUMID/TEMP 3.6V I2C 5% 6DFN / This change is considered a minor change which does not affect form, fit, function, quality, or reliability.
RoHS : Compliant

155 : $2.1731
116 : $2.4239
90 : $2.5076
65 : $2.5911
42 : $2.6747
18 : $3.2598

15,110

T491X108K006AT

KEMET Corporation

CAP TANT 1000UF 10% 6.3V 2917 / 1000 µF Molded Tantalum Capacitors 6.3 V 2917 (7343 Metric) 600mOhm
RoHS : Compliant

68 : $4.4124
51 : $4.9215
40 : $5.0912
29 : $5.2609
19 : $5.4306
8 : $6.6186

15,000

BAS40-06-GS08

Vishay Huntington

Rectifier Diode Small Signal Schottky 40V 0.2A 5ns 3-Pin SOT-23 T/R

11,115 : $0.0349
8,930 : $0.0362
6,900 : $0.0375
4,840 : $0.0401
3,125 : $0.0414
1,475 : $0.044

12,000

LMR16006YQ3DDCRQ1/LMR16006YQ3DDCTQ1

Texas Instruments

109 : $2.7745
87 : $2.8873
67 : $3.0
47 : $3.2256
30 : $3.3384
15 : $3.564

10,390

T598D337M006ATE025

KEMET Corporation

CAP TANT POLY 330UF 6.3V 2917 / 330 µF Molded Tantalum Polymer Capacitor 6.3 V 2917 (7343 Metric) 25mOhm @ 100kHz
RoHS : Compliant

395 : $0.7641
295 : $0.8522
230 : $0.8816
165 : $0.911
110 : $0.9404
45 : $1.1461

10,000

C3D10060G

Cree, Inc.

DIODE SCHOTTKY 600V 10A TO263-2 / Rectifier Diode Schottky 600V 29A Automotive 3-Pin(2+Tab) TO-263

172 : $1.9559
129 : $2.1815
100 : $2.2568
73 : $2.332
47 : $2.4072
20 : $2.9338

7,245

QM3006M3

UBIQ

1,660 : $0.2342
1,240 : $0.2613
960 : $0.2704
695 : $0.2794
450 : $0.2885
185 : $0.3506

5,064

LTC4006EGN-2#PBF

Linear Technology

IC CHARGER BATTERY 4A 16-SSOP
RoHS : Compliant

26 : $13.1788
20 : $14.6994
15 : $15.2064
11 : $15.7133
7 : $16.2202
3 : $19.7682

3,381

C3M0060065D

Wolfspeed

SICFET N-CH 650V 37A TO247-3 / N-Channel 650 V 37A (Tc) 150W (Tc) Through Hole TO-247-3
RoHS : Compliant

36 : $8.4526
27 : $9.4279
21 : $9.753
15 : $10.0781
10 : $10.4032
4 : $12.6789

2,510

Wuhan P&S

VS-E5PH6006L-N3

Vishay Intertechnologies

Hyperfast Rectifier, 60A ,600V
RoHS : Compliant

1 : $3.84
100 : $1.39
500 : $1.0
1,000 : $0.93

82,500

VS-E5PH3006L-N3

Vishay Intertechnologies

Hyperfast Rectifier,30A,600V
RoHS : Compliant

1 : $3.46
100 : $1.25
500 : $0.9
1,000 : $0.84

28,850

1N4006-E3/54

Vishay Intertechnologies

General Purpose Plastic Rectifier
RoHS : Compliant

1 : $0.71
100 : $0.24
500 : $0.22
1,000 : $0.22

22,000

NCS20061SQ3T2G

onsemi

3 MHz, 125 A Low Power Operational Amplifier
RoHS : Compliant

1 : $0.42
100 : $0.27
500 : $0.22
1,000 : $0.21

21,000

VS-APH3006L-M3

Vishay Intertechnologies

Hyperfast Rectifier,600V 30A
RoHS : Compliant

1 : $2.89
100 : $1.04
500 : $0.76
1,000 : $0.7

11,100

0W635-006-XTP

onsemi

Audio DSP

1 : $87.85
100 : $56.08
500 : $46.24
1,000 : $42.51

3,500

SZHBL5006XV2T1G

onsemi

LED Electronic Shunt
RoHS : Compliant

1 : $0.18
100 : $0.12
500 : $0.1
1,000 : $0.09

3,000

006-H4SPTM-R Reseller

Enlace URL