| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
00178RLK-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | 01 0017.86X 2.62 ORING 70SI RED | Oring Uszczelnienia Techniczne | O-ring gasket; silicone; Thk: 2.62mm; Øint: 17.86mm; red; -60÷160°C |
| 0 | |
| 7000-44001-7860500 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; 5m; 60VDC; 60VAC; 4A; Cores: 2; PUR RoHS : Compliant |
| 0 | ||
| 7000-44001-7865000 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; 40m; 60VDC; 60VAC; 4A; Cores: 2; PUR RoHS : Compliant |
| 0 | ||
| GN 300.1-78-M10-20-CR | Elesa+Ganter | Lever; adjustable; Thread len: 20mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
| GN 300.1-78-M10-SZ | Elesa+Ganter | Lever; adjustable; 78mm; zinc die-cast; Body: graphite; GN 300.1 |
| 0 | ||
| GN 300.1-78-M12-40-SR | Elesa+Ganter | Lever; adjustable; Thread len: 40mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
| GN 300.1-78-M12-50-CR | Elesa+Ganter | Lever; adjustable; Thread len: 50mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
| GN 300.1-78-M8-25-SZ | Elesa+Ganter | Lever; adjustable; Thread len: 25mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
| GN 300.1-78-M8-50-SR | Elesa+Ganter | Lever; adjustable; Thread len: 50mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
| GN 300.1-78-B10-RS | Elesa+Ganter | Lever; adjustable; 78mm; zinc die-cast; Body: red; GN 300.1 |
| 0 | ||
| GN 300.1-78-B8-SR | Elesa+Ganter | Lever; adjustable; 78mm; zinc die-cast; Body: silver; GN 300.1 |
| 0 | ||
| GN 300.1-78-M10-20-SW | Elesa+Ganter | Lever; adjustable; Thread len: 20mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
| GN 300.1-78-M10-25-SR | Elesa+Ganter | Lever; adjustable; Thread len: 25mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
| GN 300.1-78-M10-32-OS | Elesa+Ganter | Lever; adjustable; Thread len: 32mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
| GN 300.1-78-M10-80-CR | Elesa+Ganter | Lever; adjustable; Thread len: 80mm; Lever length: 78mm; GN 300.1 |
| 0 | ||
![]() Avnet Americas | FW-03-05-G-D-300-178-A-TR | Samtec Inc | Board Stackers & Spacers, Pin Header, 7.62 mm, 6 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Tape and Reel (Alt: FW-03-05-G-D-300-178-A-TR) RoHS : Compliant |
| 0 | |
| FW-20-05-G-D-300-178-A-P-TR | Samtec Inc | Board Stackers & Spacers, Pin Header, 7.62 mm, 40 Contacts, Solder, 2 Rows, 1.27 mm - Tape and Reel (Alt: FW-20-05-G-D-300-178-A-P-TR) RoHS : Compliant |
| 0 | ||
| 7100017837 | 3M Interconnect | BUFF AND BLEND CROSS BUFF HS, 727460, A/ - Bulk (Alt: 7100017837) RoHS : Not Compliant |
| 0 | ||
| MAL250017822E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 8200 uF, 450 V, ? 20%, Screw - Boxed Product (Development Kits) (Alt: MAL250017822E3) RoHS : Compliant |
| 0 | ||
| RCWP5100178RFKEC | Vishay Intertechnologies | RCWP-5100 178 1% K EC e3 - Tape and Reel (Alt: RCWP5100178RFKEC) RoHS : Compliant |
| 0 | ||
| LCA0207001789G2200 | Vishay Intertechnologies | Resistor General Purpose Carbon Film 17.8 Ohm 2% 7/20W Axial Box - Ammo Pack (Alt: LCA0207001789G2200) RoHS : Not Compliant |
| 0 | ||
| RCWP1100178RFKEC | Vishay Intertechnologies | RCWP-1100 178 1% K EC e3 - Tape and Reel (Alt: RCWP1100178RFKEC) RoHS : Compliant |
| 0 | ||
| SFR2500001783FR500 | Vishay Intertechnologies | SFR25 1% R5 178K - Tape and Reel (Alt: SFR2500001783FR500) RoHS : Compliant |
| 0 | ||
| HLCD-20-01.78-TH-BD-4 | Samtec Inc | - Bulk (Alt: HLCD-20-01.78-TH-BD-4) RoHS : Compliant |
| 0 | ||
| FL4000178 | Diodes Incorporated | - Tape and Reel (Alt: FL4000178) RoHS : Compliant |
| 0 | ||
| LCA0414001789G2100 | Vishay Intertechnologies | Resistor General Purpose Carbon Film 17.8 Ohm 2% 3/5W Axial Box - Ammo Pack (Alt: LCA0414001789G2100) RoHS : Not Compliant |
| 0 | ||
| CSH00178 | Omega Engineering | CHANNEL STRIP HEATERS, CERAMIC INSULATED, 38.1 X 7.94 MM (1 1/2 X 5/16") - Bulk (Alt: CSH00178) RoHS : Compliant |
| 0 | ||
| HVR2500001783FR500 | Vishay Intertechnologies | HVR25 1% R5 178K - Tape and Reel (Alt: HVR2500001783FR500) RoHS : Compliant |
| 0 | ||
| 63700-1786 | Molex | - Bulk (Alt: 0637001786) RoHS : Compliant |
| 0 | ||
| 8600178931 | Super Micro Computer Inc | - Bulk (Alt: 8600178931) RoHS : Not Compliant | 0 | |||
![]() Newark | MP000178 | SPC Multicomp | Res, Aec-Q200, 680R, 5%, 0.75W, 2010; |Multicomp Pro MP000178 RoHS : Compliant |
| 13,356 | |
| MP000178 | SPC Multicomp | Res, Aec-Q200, 680R, 5%, 0.75W, 2010; |Multicomp Pro MP000178 RoHS : Compliant |
| 13,356 | ||
| MP001783 | SPC Multicomp | Wtb Housing, Rcpt, 4Pos, 1Row, 2Mm; |Multicomp Pro MP001783 RoHS : Compliant |
| 5,367 | ||
| MP001785 | SPC Multicomp | Wtb Housing, Rcpt, 6Pos, 1Row, 2Mm; |Multicomp Pro MP001785 RoHS : Compliant |
| 5,356 | ||
| MP001782 | SPC Multicomp | Wtb Housing, Rcpt, 3Pos, 1Row, 2Mm; |Multicomp Pro MP001782 RoHS : Compliant |
| 3,568 | ||
| MP001788 | SPC Multicomp | Wtb Housing, Rcpt, 9Pos, 1Row, 2Mm; |Multicomp Pro MP001788 RoHS : Compliant |
| 3,279 | ||
| MP001784 | SPC Multicomp | Wtb Housing, Rcpt, 5Pos, 1Row, 2Mm; |Multicomp Pro MP001784 RoHS : Compliant |
| 3,009 | ||
| MP001787 | SPC Multicomp | Wtb Housing, Rcpt, 8Pos, 1Row, 2Mm; |Multicomp Pro MP001787 RoHS : Compliant |
| 2,882 | ||
| MP001786 | SPC Multicomp | Wtb Housing, Rcpt, 7Pos, 1Row, 2Mm; |Multicomp Pro MP001786 RoHS : Compliant |
| 2,499 | ||
| MC000178 | SPC Multicomp | Tb, Pluggable, Multicomp Pro Mc000178; |Multicomp Pro MC000178 RoHS : Compliant |
| 1,397 | ||
| PS000178 | SPC Multicomp | Din Audio/Video Conn, Plug, 5Pos, Pvc; |Multicomp Pro PS000178 RoHS : Compliant |
| 722 | ||
| ZW-20-15-G-D-200-178 | Samtec Inc | Conn Stack Brd, 2.54Mm, 40Pos, Hdr; |Samtec, Inc. ZW-20-15-G-D-200-178 RoHS : Compliant |
| 151 | ||
| MC001786 | SPC Multicomp | Surge Protector Adaptor, N Plug-Jack; |Multicomp Pro MC001786 RoHS : Compliant |
| 91 | ||
| ZW-32-15-G-D-200-178 | Samtec Inc | Conn Stack Brd, 2.54Mm, 64Pos, Hdr; |Samtec, Inc. ZW-32-15-G-D-200-178 RoHS : Compliant |
| 76 | ||
| PPA00017-8FT | L-com Inc | Cord, Iec C13 To Nema L6-20P, 8Ft, 15A; |L-Com PPA00017-8FT RoHS : Compliant |
| 16 | ||
![]() RS | 1SNA178032R2500 (017803225) | TE Connectivity | JUMPERS / BRIDGES BDJ6 10POLE JUMPER ENTRELEC |
| 482 | |
| VAB1SW0B-AZW00-0 (RCV-00017864|VAB1SW0B-AZW00-0|VAB1SW0BAZW000) | Carling Technologies | ROCKER SWITCH, DPST, ON-NONE-OFF, ILLUMINATED, SQUARE BLUE LENS,15A,.250"QC |
| 199 | ||
| 82_MMBX-S50-0-1/111_NH (23001784) | HUBER+SUHNER | RF CONNECTOR, MMBX STRAIGHT PCB JACK(F) |
| 100 | ||
| 1SNA178027R2000 (017802720) | TE Connectivity | JUMPERS / BRIDGES BJD6 5 POLES ENTRELEC |
| 57 | ||
| 1SNA178431R2200 (017843122) | TE Connectivity | CARTE 54 PROTEC. TRANSP. EPR1,ENTRELEC |
| 47 | ||
| RSKF 8 (700000178) | Lumberg Automation | PANEL NUT M8 FOR MALE AND FEMALE RECEPTACLES |
| 29 | ||
| 1434 (7100178445) | 3M | NEARSURFACE MARKERS 1434, WATER |
| 27 | ||
| 1SNA178024R2500 (017802425) | TE Connectivity | BDJ6 2 POLES, ENTRELEC |
| 20 | ||
| 1SNA178072R0500 (017807205) | TE Connectivity | BCPF ASSEMBLY FLANGES BLACK, ENTRELEC |
| 10 | ||
| 1SNA178026R2700 (017802627) | TE Connectivity | BJD6 4 POLES, ENTRELEC |
| 10 | ||
| 120070-0178 (8R4006A16M010) | Woodhead Molex | SENSOR CABLE, 4 POSITION, MALE, 1 M, PVC JACKET, 250 V, BRAD MICRO-CHANGE SERIES |
| 9 | ||
| 1SNA178944R0400 (017894404) | TE Connectivity | OUPAD SEMI-AUTOMATIC WIRE CONNECTION TOOL, SNA SERIES |
| 7 | ||
| 82_MMBX-S50-0-1/111_NE (23001785) | HUBER+SUHNER | RF CONNECTOR, MMBX STRAIGHT PCB JACK(F) |
| 4 | ||
| 7001788 | RS Pro | PANEL MOUNT INDICATOR, 12V DC, 8MM MOUNTING HOLE SIZE, SOLDER TAB, IP67 |
| 3 | ||
| F000178 (4A-48-4-00-1-000) | GEFRAN spa | INDICATOR FOR VOLTAGE AND CURRENT INPUTS |
| 2 | ||
![]() Bisco Industries | 0800.1780SPMSDSSQQP | MACHINE SCREWS | 1,973 | |||
| 027-6005-00-0-178 | Staffall | 35 | ||||
![]() Rochester Electronics | TMC-40-0178 | Analog Devices Inc | Breakout board for TMC2209 | 20 | ||
| 514NBC000178AAG | Skyworks Solutions Inc | CRYSTAL OSC XO (Standard) CMOS, Dual (Complimentary) 16MHz 2.97V ~ 3.63V ±25ppm 6-SMD RoHS : Compliant |
| 64 | ||
![]() Sager | FW-03-05-G-D-300-178-A-TR | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | |
| FW-20-05-G-D-300-178-A-P-TR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
| 1552400178 | Molex | Multi-Conductor Cables | 0 | |||
| 1-2300178-3 | TE Connectivity | Headers & Wire Housings EP2.5 HDR ASSY 13P VERT W/ BOSS,RED RoHS : Compliant |
| 0 | ||
| P0500-178 | Littelfuse Inc | Relay Sockets & Hardware BASESMT0.69X3.00 |
| 0 | ||
| 0150200178 | Molex | FFC & FPC Connectors Premo-Flex 0.50 (Au) Lgt 229 TypeD 16Ckt RoHS : Compliant | 0 | |||
| HLCD-20-01.78-TH-BD-4 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| 1731100178 | Molex | D-Sub Standard Connectors RoHS : Compliant |
| 0 | ||
| 0625001789 | Molex | Bench Top Tools | 0 | |||
| FW-03-05-G-D-300-178-A-FR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 1300000178 | Molex | AC Power Cords QC 3P MP 12' 10/3 SO CORD ALUM | 0 | |||
| A170-0178 | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| 466-04000-178 | Carling Technologies | Rocker Switches ROCKER VVE OR FLH00-000 | 0 | |||
| P7-900178-2 | OTTO Engineering Inc | Pushbutton Switches P7-100022 W 13 IN 20 AWG, MOLEX PINS | 0 | |||
| RF179-73RP1-303030-0178 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
![]() Ameya Holding Limited | BM1R00178F-E2 | ROHM Semiconductor | 高效率、低待机功耗、支持连续模式的二次侧同步整流控制IC RoHS : Compliant |
| 5,000 | |
| 75001783-001 | Microchip Technology Inc | 2,292 | ||||
![]() Interstate Connecting Components | 24-001783 | Conec Corporation | D-SUB FILTER 09P RoHS : Compliant | 0 | ||
| 1-2300178-3 | TE Connectivity | EP2.5 HDR ASSY 13P VERT W/ BOS RoHS : Compliant |
| 0 | ||
| ZPF000000000017826 | TE Connectivity | EP 38002-24 | 0 | |||
| 130001783 | Amphenol Procom | MU 9-CXP4380-410 MHZ ANTENNAS | 0 | |||
| 980-0000-178 | ITT Interconnect Solutions | 9800000178 | 0 | |||
| 20017830-00 | TE Connectivity | 1201F-0200-360-001 RoHS : Compliant | 0 | |||
| 20017875-00 | TE Connectivity | FN2420-A1-200KN-/Z04 RoHS : Compliant | 0 | |||
| 20017894-00 | TE Connectivity | EGCS-D0-10000-/L2M RoHS : Not Compliant | 0 | |||
| 220000178 | Amphenol Procom | PRO-AR4G-230V12V-NN-1L BPF 704 COMBINERS | 0 | |||
| 192900-0178 | ITT Interconnect Solutions | TNA24CA01-25B RoHS : Compliant | 0 | |||
| 200001789 | Amphenol Procom | BRBP 22-125 N FILTERS | 0 | |||
| 10-611100-178 | Amphenol Industrial Operations | CONNECTOR | 0 | |||
| 20017839-00 | TE Connectivity | C/360_TE8S_PV6X7B-6M_ | 0 | |||
| 001788-000 | TE Connectivity | SMOE-81180 | 0 | |||
| ZPF000000000017818 | TE Connectivity | EP 38002-08 | 0 | |||
![]() PEI Genesis | 980-0000-178 | ITT Interconnect Solutions |
| 1,260 | ||
![]() Powell Electronics | 10-611100-178 | Amphenol Corporation | CONTACT |
| 533 | |
| 23001784 | HUBER+SUHNER | RF Component RoHS : Compliant |
| 345 | ||
| ZW-20-15-G-D-200-178 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 100 | ||
| ZW-32-15-G-D-200-178 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 50 | ||
| 23001781 | HUBER+SUHNER | RF Component RoHS : Compliant |
| 30 | ||
| 76000178-002 REV B | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 1 | ||
| 20017850-00 | TE Connectivity | SENSOR (TE REF 20017850-00) |
| 1 | ||
![]() Chip 1 Exchange | 0-0178303-3 | INSTOCK | 80 | |||
| NT-3001784 | INSTOCK | 43 | ||||
| NT-3001783 | INSTOCK | 25 | ||||
| NT-3001781 | INSTOCK | 24 | ||||
| NT-3001782 | INSTOCK | 16 | ||||
![]() Avnet Abacus | K2001786 | TE Connectivity | Toggle Switch 072222 (Alt: K2001786) RoHS : Not Compliant | 0 | ||
| 210200178 | Molex | FFC Jumper Cable 16Conductors 023m 30V 05A Bag (Alt: 210200178) RoHS : Compliant | 0 | |||
| MAL250017822E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 8200 uF 450 V 20 Screw (Alt: MAL250017822E3) RoHS : Compliant | 0 | |||
| ZPF000000000017850 | TE Connectivity | (Alt: ZPF000000000017850) RoHS : Not Compliant | 0 | |||
| ZPF000000000017869 | TE Connectivity | (Alt: ZPF000000000017869) RoHS : Not Compliant | 0 | |||
| ZPF000000000017871 | TE Connectivity | (Alt: ZPF000000000017871) RoHS : Not Compliant | 0 | |||
| HVR2500001783FR500 | Vishay Intertechnologies | HVR25 1 R5 178K - Tape and Reel (Alt: HVR2500001783FR500) RoHS : Compliant | 0 | |||
| ZPF000000000017895 | TE Connectivity | DAUFASTE 07 MXB 00 A (Alt: ZPF000000000017895) RoHS : Compliant | 0 | |||
| ZPF000000000017838 | TE Connectivity | (Alt: ZPF000000000017838) RoHS : Not Compliant | 0 | |||
| ZPF000000000017845 | TE Connectivity | (Alt: ZPF000000000017845) RoHS : Not Compliant | 0 | |||
| ZPF000000000017863 | TE Connectivity | (Alt: ZPF000000000017863) RoHS : Compliant | 0 | |||
| ZPF000000000017837 | TE Connectivity | (Alt: ZPF000000000017837) RoHS : Not Compliant | 0 | |||
| ZPF000000000017858 | TE Connectivity | (Alt: ZPF000000000017858) RoHS : Not Compliant | 0 | |||
| ZPF000000000017873 | TE Connectivity | (Alt: ZPF000000000017873) RoHS : Not Compliant | 0 | |||
| FW-20-05-G-D-300-178-A | Samtec Inc | Conn Board Stacker HDR 40 POS 127mm Solder ST SMD (Alt: FW-20-05-G-D-300-178-A) RoHS : Compliant | 0 | |||
![]() Avnet Asia | LINPTFNB00A001788 | Vishay Intertechnologies | VISLINPTFNB00A001788 LIN TI 1100 BO A001 (Alt: LINPTFNB00A001788) RoHS : Compliant | 0 | ||
| U1005A1-001-78SN | Amphenol Corporation | AHLU1005A1-001-78SN UHF MALE CAP WITH CH (Alt: U1005A1-001-78SN) RoHS : Compliant | 0 | |||
| 1000178659 | Molex | ZQSFP+ 1X4 CG ASY RB, SDR RING CUT,HS LP (Alt: 1000178659) RoHS : Compliant | 0 | |||
| 1000178657 | Molex | ZQSFP+ 1X4, W/ PN HS FLARED LP (Alt: 1000178657) RoHS : Compliant | 0 | |||
| 0367500178 | Molex | 0W5197 CABLE RIBBON ASSY 14 PIN 21 CS (Alt: 0367500178) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FL2400178 | Diodes Incorporated | Crystal Quartz 24 MHz SMD 32mm x 25mm x 068mm FL (Alt: FL2400178) RoHS : Compliant | 0 | ||
| DTR0000178017 (ALS) | Sanmina Corporation | (Alt: DTR0000178017) RoHS : Not Compliant | 0 | |||
![]() DB Roberts | 07003-00178 | Avdel | 0 | |||
| FAM400-178 | Pop Rivets | PNT210310410 NOSEPIECE M10 | 0 | |||
| TOOL/REPAIR#100178 | PennEngineering (PEM) | 0 | ||||
![]() Master Electronics | ZPF000000000017872 | TE Connectivity | FAST-E 02 F-X MOQ Reduction RoHS : Not Compliant |
| 0 | |
| FW-03-05-G-D-300-178-A-TR | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| 7100178316 | 3M Interconnect | 50 POSITION RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-200-178 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 7100178315 | 3M Interconnect | Connectors D-Sub Standard 37P CLOSD COVER PLUG LOW PROFILE | 3M 8237-7000 RoHS : Compliant |
| 0 | ||
| 1-2300178-3 | TE Connectivity | EP2.5 HDR ASSY 13P VERT W/ BOSS RED MOQ Reduction RoHS : Compliant |
| 0 | ||
| 10017842 | RECOM Power GmbH | Regulated DC-DC Converter - Input: 36 to 75VDC - Output: 3.4VDC - 2kV Isolation - CTRL Pin - Metal Case - Thru Hole RoHS : Compliant |
| 0 | ||
| ZPF000000000017851 | TE Connectivity | FAST-D 02 M-X-B 00 A MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| ZPF000000000017888 | TE Connectivity | FAST-E 03 M-X-A 00 A MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| ZPF000000000017850 | TE Connectivity | FAST-D 02 M-X-A 00 B MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| ZPF000000000017887 | TE Connectivity | FAST-E 03 M-X MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| XP-0000-0178-2 | 3M Interconnect | .100 .100 CONNECTOR FOR RoHS : Compliant |
| 0 | ||
| ZPF000000000017869 | TE Connectivity | FAST-E 01 M-X-A 00 B MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| ZPF000000000017871 | TE Connectivity | FAST-E 01 M-X-B 00 B MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| HLCD-20-01.78-TH-BD-4 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | BWA-BATT-001, 78261 | Banner Engineering Corp | Banner Engineering BWA-BATT-001 Battery,Non-Rechargeable,Lithium,3.6 Volt D Size,Replacement For DX81,78261 |
| 12 | |
| P0500-178 | Littelfuse Inc | Relay Sockets & Hardware BASESMT0.69X3.00 |
| 7 | ||
| 2200000178 | Basler AG | Camera Lenses Lens Basler C23-0816-2M F1.6 f8.6mm |
| 5 | ||
| 100-01782-AO | AddOn Networks | 100-01782 COMP CALIX OC-48-BX TAA XCVR |
| 0 | ||
| 100-01784-AO | AddOn Networks | ADDON CALIX COMP XCVR 2.4G/1.2G-B+ SC 40KM SMF SFP |
| 0 | ||
| 100-01783-AO | AddOn Networks | CALIX 100-01783 COMP XCVR TAA 2.5G-BX SC 20KM RUGGED SMF SFP |
| 0 | ||
![]() Pasternack Enterprises US | PE3W00178 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMA Male to Mini SMP Female Cable Using PE-047SR C. PE3W00178 is a SMA male to Mini SMP female cable using PE-047SR coax. This Pasternack SMA male to Mini SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm Mini SMP for connector 2. Our male SMA to female Mini SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W00178 SMA male to Mini SMP female cable assembly is constructed with PE-047SR coax. | 0 | ||
| PE3C100178 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-5.0FLEX, RF Cable Type: PE-5.0FLEX, RF Cable Impedance: 50 Ohm. 2.92mm Male to 2.92mm Male MicroFlex Cable Using 5.0mm Bend Radius Coax., Pasternack’s PE3C100178 Microflex 2.92mm male to 2.92mm male RF cable assembly using PE-5.0FLEX coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax Microflex cable assembly is built with a 2.92mm cable connection on both ends. Our 2.92mm cable assembly has a male gender on both ends. PE3C100178 can also be known as a Microflex 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. The 2.92mm to 2.92mm Microflex cable from Pasternack is ideal for applications including ultra-tight routing, unmanned aerial systems, weight restricted environment, high vibration environments, applications that require low signal loss and UAV avionics. The minimum bend radius for this cable is 5 mm, allowing for a single bend without damaging the cable. Our PE3C100178 RF cable has an FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly has coupling nuts made of passivated stainless steel on both ends. This PE3C100178 2.92mm plug to 2.92mm plug cable assembly is built with PE-5.0FLEX, which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, and has a 50 Ohm impedance. Both the connectors have a press fit/solder attachment method with body materials consisting of gold-plated beryllium copper for both connectors. Additional dimensions, specifications, and CAD drawings for this Microflex RF cable are available on our downloadable PDF datasheet. This Microflex 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm Microflex RF cable assembly as per your requirements. | 0 | |||
| PE3C100178-10 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-5.0FLEX, RF Cable Type: PE-5.0FLEX, RF Cable Impedance: 50 Ohm, Length, Max: 10 inches. 2.92mm Male to 2.92mm Male MicroFlex Cable 10 Inch Length Using 5.0mm Bend Radius Coax., Pasternack’s PE3C100178-10 Microflex 2.92mm male to 2.92mm male RF cable assembly using PE-5.0FLEX coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax Microflex cable assembly is built with a 2.92mm cable connection on both ends. Our 2.92mm cable assembly has a male gender on both ends. PE3C100178-10 can also be known as a Microflex 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. The 2.92mm to 2.92mm Microflex cable from Pasternack is ideal for applications including ultra-tight routing, unmanned aerial systems, weight restricted environment, high vibration environments, applications that require low signal loss and UAV avionics. The minimum bend radius for this cable is 5 mm, allowing for a single bend without damaging the cable. Our PE3C100178-10 RF cable has an FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly has coupling nuts made of passivated stainless steel on both ends. This PE3C100178-10 2.92mm plug to 2.92mm plug cable assembly is built with PE-5.0FLEX, which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, and has a 50 Ohm impedance. Both the connectors have a press fit/solder attachment method with body materials consisting of gold-plated beryllium copper for both connectors. Additional dimensions, specifications, and CAD drawings for this 10-inch-long Microflex RF cable are available on our downloadable PDF datasheet. This Microflex 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm Microflex RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100178-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-5.0FLEX, RF Cable Type: PE-5.0FLEX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to 2.92mm Male MicroFlex Cable 12 Inch Length Using 5.0mm Bend Radius Coax., Pasternack’s PE3C100178-12 Microflex 2.92mm male to 2.92mm male RF cable assembly using PE-5.0FLEX coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax Microflex cable assembly is built with a 2.92mm cable connection on both ends. Our 2.92mm cable assembly has a male gender on both ends. PE3C100178-12 can also be known as a Microflex 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. The 2.92mm to 2.92mm Microflex cable from Pasternack is ideal for applications including ultra-tight routing, unmanned aerial systems, weight restricted environment, high vibration environments, applications that require low signal loss and UAV avionics. The minimum bend radius for this cable is 5 mm, allowing for a single bend without damaging the cable. Our PE3C100178-12 RF cable has an FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly has coupling nuts made of passivated stainless steel on both ends. This PE3C100178-12 2.92mm plug to 2.92mm plug cable assembly is built with PE-5.0FLEX, which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, and has a 50 Ohm impedance. Both the connectors have a press fit/solder attachment method with body materials consisting of gold-plated beryllium copper for both connectors. Additional dimensions, specifications, and CAD drawings for this 12-inch-long Microflex RF cable are available on our downloadable PDF datasheet. This Microflex 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm Microflex RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100178-4 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-5.0FLEX, RF Cable Type: PE-5.0FLEX, RF Cable Impedance: 50 Ohm, Length, Max: 4 inches. 2.92mm Male to 2.92mm Male MicroFlex Cable 4 Inch Length Using 5.0mm Bend Radius Coax., Pasternack’s PE3C100178-4 Microflex 2.92mm male to 2.92mm male RF cable assembly using PE-5.0FLEX coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax Microflex cable assembly is built with a 2.92mm cable connection on both ends. Our 2.92mm cable assembly has a male gender on both ends. PE3C100178-4 can also be known as a Microflex 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. The 2.92mm to 2.92mm Microflex cable from Pasternack is ideal for applications including ultra-tight routing, unmanned aerial systems, weight restricted environment, high vibration environments, applications that require low signal loss and UAV avionics. The minimum bend radius for this cable is 5 mm, allowing for a single bend without damaging the cable. Our PE3C100178-4 RF cable has an FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly has coupling nuts made of passivated stainless steel on both ends. This PE3C100178-4 2.92mm plug to 2.92mm plug cable assembly is built with PE-5.0FLEX, which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, and has a 50 Ohm impedance. Both the connectors have a press fit/solder attachment method with body materials consisting of gold-plated beryllium copper for both connectors. Additional dimensions, specifications, and CAD drawings for this 4-inch-long Microflex RF cable are available on our downloadable PDF datasheet. This Microflex 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm Microflex RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100178-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-5.0FLEX, RF Cable Type: PE-5.0FLEX, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to 2.92mm Male MicroFlex Cable 6 Inch Length Using 5.0mm Bend Radius Coax., Pasternack’s PE3C100178-6 Microflex 2.92mm male to 2.92mm male RF cable assembly using PE-5.0FLEX coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax Microflex cable assembly is built with a 2.92mm cable connection on both ends. Our 2.92mm cable assembly has a male gender on both ends. PE3C100178-6 can also be known as a Microflex 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. The 2.92mm to 2.92mm Microflex cable from Pasternack is ideal for applications including ultra-tight routing, unmanned aerial systems, weight restricted environment, high vibration environments, applications that require low signal loss and UAV avionics. The minimum bend radius for this cable is 5 mm, allowing for a single bend without damaging the cable. Our PE3C100178-6 RF cable has an FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly has coupling nuts made of passivated stainless steel on both ends. This PE3C100178-6 2.92mm plug to 2.92mm plug cable assembly is built with PE-5.0FLEX, which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, and has a 50 Ohm impedance. Both the connectors have a press fit/solder attachment method with body materials consisting of gold-plated beryllium copper for both connectors. Additional dimensions, specifications, and CAD drawings for this 6-inch-long Microflex RF cable are available on our downloadable PDF datasheet. This Microflex 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm Microflex RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100178-8 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-5.0FLEX, RF Cable Type: PE-5.0FLEX, RF Cable Impedance: 50 Ohm, Length, Max: 8 inches. 2.92mm Male to 2.92mm Male MicroFlex Cable 8 Inch Length Using 5.0mm Bend Radius Coax., Pasternack’s PE3C100178-8 Microflex 2.92mm male to 2.92mm male RF cable assembly using PE-5.0FLEX coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax Microflex cable assembly is built with a 2.92mm cable connection on both ends. Our 2.92mm cable assembly has a male gender on both ends. PE3C100178-8 can also be known as a Microflex 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. The 2.92mm to 2.92mm Microflex cable from Pasternack is ideal for applications including ultra-tight routing, unmanned aerial systems, weight restricted environment, high vibration environments, applications that require low signal loss and UAV avionics. The minimum bend radius for this cable is 5 mm, allowing for a single bend without damaging the cable. Our PE3C100178-8 RF cable has an FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly has coupling nuts made of passivated stainless steel on both ends. This PE3C100178-8 2.92mm plug to 2.92mm plug cable assembly is built with PE-5.0FLEX, which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, and has a 50 Ohm impedance. Both the connectors have a press fit/solder attachment method with body materials consisting of gold-plated beryllium copper for both connectors. Additional dimensions, specifications, and CAD drawings for this 8-inch-long Microflex RF cable are available on our downloadable PDF datasheet. This Microflex 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm Microflex RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | DS90CP02SP-S7001783 | Texas Instruments | 6,650 | |||
| 1001780000 | Weidmueller & Kg | 2,450 | ||||
| 3001789 | Phoenix Contact | Modular Terminal Block, 101A, 25mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 2,400 | |||
| GC2500178 | Diodes Incorporated | Parallel - Fundamental Quartz Crystal, 25MHz Nom | 570 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |