The D2-7xx83 family of the DAE-6™ Digital Audio Engine™
devices are complete System-on Chip (SoC) audio processor
and Class-D amplifier controllers. Integrated DSP processing
and configurable audio processing algorithms provide an
extremely flexible platform for feature rich and cost-effective
quality audio solutions which benefit from the addition of
Class-D amplifiers and DSP audio processing, meeting
demands of consumer electronics applications.
The 12 integrated digital PWM controllers can be used in a
variety of multi-channel audio system configurations,
supporting powered as well as line outputs. Fully protected
amplifier control provides efficient and clean Class-D power
output support.
The DAE-6™ device family supports full audio decoding for
formats including Dolby® Digital, Dolby® Pro Logic IIx,
AAC™ LC, DTS® Digital Surround, DTS® ES, and DTS Neo:6®.
The DAE-6 is pin-compatible and function/feature compatible
with the DAE-3™ devices, enabling additional decoding
capability to existing designs, or providing cost optimization to
lower-featured systems not requiring the additional audio
processing and decode capability

Features
• Advanced DAE-6™ Digital Audio Engine™ IC
- Pin Compatible and Function/Feature Compatible with
the D2Audio® DAE-3™ Device
• Total System on Chip (SoC)
- All Digital Class-D Amplifier Controller
- Full 5.1/7.1/9.1-Channel Amplifier Platform Support
• Enhanced Audio Processing Decoders
- Dolby® Digital/AC3
- Dolby® Pro Logic IIx
- AAC LC™
- DTS® Digital Surround
- DTS® ES
- DTS Neo:6®
• D2Audio® SoundSuite™ Enhancement and Virtualization
• Mark Levinson MightyCat™ Audio Enhancement
• Expanded On-Chip Memory Capacity
• Integrated DSP Processing
- 12 Channels of Digital Signal Processing (DSP) including
Equalizers, Filters, Mixers and Other Common Audio
Processing Blocks
- Fully Configurable and Routable Audio Signal Paths
• Flexible Audio Input and Output Configurations
• Embedded 8-Channel Sample Rate Converter
- Sample Rates from 32kHz up to 192kHz
• Real-Time Amplifier Control and Monitoring
- Supports Bridged, Half-Bridged, and Bridge-Tied Load
(BTL) Topologies, Using Discrete or Integrated Power
Stages from 10W to Over 500W
- Complete Fault Protection with Automatic Recovery

Applications
• Audio Video Receiver (AVR)
• DTV Soundbar
• Home Theater in A Box (HTiB)
• Multi-Channel Multi-Media (MM) Systems
• Multi-Room Distributed Audio (MRDA)
• Powered Speaker Systems
• Automotive Trunk/Amplified Solutions