Description

The AT24C21 provides 1024 bits of serial electrically erasable and programmable read only memory (EEPROM) organized as 128 words of 8 bits each. The device is optimized for use in applications requiring data storage and serial transmission of configuration and control information. The AT24C21 features two modes of operation: Transmit-Only Mode and Bidirectional Mode. Upon power-up, the AT24C21 will be in the Transmit-Only Mode, sending a serial-bit stream of the entire memory contents, clocked via the VCLK pin. The Bidirectional Mode is selected by a valid high-to-low transition on the SCL pin and offers byte selectable read/write capability of the entire memory array. The AT24C21 is available in space saving 8-pin PDIP and 8-pin SOIC packages.

Features

• 2-Wire Serial Interface

• Schmitt Trigger, Filtered Inputs For Noise Suppression

• DDC1™/ DDC2™ Interface Compliant for Monitor Identification

• Low Voltage Operation

   – 2.5 (VCC = 2.5V to 5.5V)

• Internally Organized 128 x 8

• 100 kHz (2.5V) Compatibility

• 8-Byte Page Write Mode

• Write Protection Available

• Self-timed Write Cycle (10 ms max)

• High Reliability

   – Endurance: 1 Million Write Cycles

   – Data Retention: 100 Years

   – ESD Protection: >3000V

• 8-Pin PDIP and JEDEC SOIC Packages