General Description
The MAX9960 dual-flash-pin electronics/supervoltage switch matrix replaces most of the relays and switches commonly needed to connect system resources to each of two pins in a flash memory or SOC ATE system (Figure 1). The device provides seven switches per channel to select up to four independent sources: the pin electronics (PE), two parametric measurement units (PMUs) or other Kelvin analog resources, and a flash memory programming supervoltage (FVHH_). The force-and-sense PMU switches are independently controlled, enabling their use to connect two non-Kelvin resources in place of each PMU or Kelvin resource. Each MAX9960 contains two complete seven-switch channels with fully independent controls

Features
♦ Dual Supervoltage Switch Arrays
♦ 3Ω, 8pF, 600MHz Bandwidth Pin Electronics Paths
♦ 13V Flash Programming Paths
♦ On-Chip 1x and 2x Selectable Gains
♦ 2 Kelvin PMU Paths
♦ Fast Switching: 350ns (typ)
♦ Monotonic Slew Rate When Switching Between PE_ and FVHH_

Applications
    Flash Memory Automatic Test Equipment
    SOC Automatic Test Equipment