Overview
The LC8905V is for use in IEC 958 and EIAJ CP-1201 format data transmission between digital audio equipment. This LSI is used on the receiving side, and handles synchronization with the input signal and demodulation of that signal to a normal format signal.

Features
• On-chip PLL circuit synchronizes with the transmitted IEC 958 and EIAJ CP-1201 format signal.
• Provides 128fs, bit, and L/R clock outputs.
• System clock can be selected to be either 384fs or 512fs.
• Microprocessor interface code settings for different output types
    — Input pin, emphasis output, input bi-phase data output, and validity flag output settings
    — Audio data output format setting
    — Channel status output (32-bit output for consumer products)
    — Subcode Q output with CRC flags (80 bits)
• Start ID and shortening ID detection for DAT (Digital Audio Tape recorder) that use subcodes
• CMOS, single-voltage power supply
• Miniature package: SSOP-24