DESCRIPTION
The Teridian 73S8014RT is a single smart card (ICC) interface circuit. It is derived from the 73S8024RN industry-standard electrical interface but adds support for 1.8V smart card applications. The 73S8014RT has been optimized to match most of the typical Set-Top Box / A/V Conditional Access applications.
Optimization essentially involved a smaller pin-count and support for single I/O.
   
FEATURES
• Card Interface:
    ▪ Complies with ISO 7816-3, EMV 4.0
    ▪ 73S801RT device supports 3V / 5V cards up to
        65mA and 1.8V up to 40mA
    ▪ ISO 7816-3 Activation / Deactivation sequencer
    ▪ Automated deactivation upon hardware fault (i.e.
        upon drop on VDD power supply or card
        overcurrent)
    ▪ The VDD voltage supervisor threshold value (fault)
        can be externally adjusted
    ▪ Over-current detection 130mA max
    ▪ Card CLK clock frequency up to 20MHz
• System Controller Interface:
    ▪ 3 Digital inputs control the card activation /
        deactivation, card reset and card voltage
    ▪ 2 Digital inputs control the card clock frequency
    ▪ 1 Digital output, interrupt to the system controller,
        reports to the host the card presence and faults
    ▪ Crystal oscillator or host clock, up to 27MHz
• Regulator Power Supply:
    ▪ 4.75V to 5.5V (EMV 4.0)
• Digital Interfacing: 2.7V to 5.5V
• 6kV ESD protection on the card interface
• Package: SO 20-pin
• RoHS compliant (6/6) lead-free package
   
APPLICATIONS
• Set-Top Box Conditional Access and Pay-perView
• General purpose smart card readers