[Description]
High temperature masking tape and dots are ideal for masking gold fingers of printed circuit boards during wave solder or solder
dip process, as well as for solder wave masking and electrical insulation.
This high temperature tape is a polyimide, pressure sensitive, adhesive tape with silicon resin, which shows excellent dielectric
insulation properties, high heat resistance and excellent solvent resistance. These properties result in a tape with remarkable
dimensional stability and excellent electrical and physical properties over a wide range of temperatures.
This product is neither corrosive nor ozone depleting and is both flame and chemical resistant.
DIN Value: ASTM Value:
Structure Silicone Adhesive / Polymide Film
Base Film Thickness 0.025mm 1.0MIL
Total Thickness 0.07mm 2.8.MIL
Peel Strength 2.7N/CM 25oz/In
Tensile Strength 40N/CM 22lbs/In
Elongation 50% 50%
Heat Resistance (Short Term) 290°C 554°F
Heat Resistance 230°C 446°F
Appearance Amber Amber