Description
The iP2004 is a fully optimized solution for high current synchronous buck multiphase applications. Board space and design time are greatly reduced because most of the components required for each phase of a typical discrete-based multiphase circuit are integrated into a single 7.7mm x 7.7mm x 2.2mm power block. The only additional components required for a complete multiphase converter are a PWM controller, the output inductors, and the input and output capacitors.

Features
• 40A Multiphase building block
• No derating up to TC = TPCB = 95ºC
• Optimized for low power loss
• Bias supply range of 4.5V to 6.0V
• Operation up to 1.5MHz
• Over temperature protection
• Bi-directional Current flow
• Under Voltage Lockout
• LGA interface
• 7.7mm x 7.7mm x 2.2mm package

Applications
• High frequency, Multi-phase Converters
• Low Duty-Ratio, High Current Microprocessor Power Supplies
• High Frequency Low Profile DC-DC Converters