FEATURES:
SERIAL DIGITAL INTERFACE
VOLTAGE OUTPUT: ±10V, ±5V, 0 to +10V
1 LSB INTEGRAL LINEARITY
16-BIT MONOTONIC OVER TEMPERATURE
PRECISION INTERNAL REFERENCE
LOW NOISE: 120nV/√Hz Including Reference
16-LEAD PLASTIC AND CERAMIC SKINNY
DIP AND PLASTIC SO PACKAGES

DESCRIPTION
The DAC714 is a complete monolithic digital-toanalog
(D/A) converter including a +10V temperature compensated
reference, current-to-voltage amplifier, a high-speed
synchronous serial interface, a serial output which allows
cascading multiple converters, and an asynchronous clear
function which immediately sets the output voltage to midscale.
The output voltage range is ±10V, ±5V, or 0 to +10V while
operating from ±12V or ±15V supplies. The gain and bipolar
offset adjustments are designed so that they can be set via
external potentiometers or external D/A converters. The
output amplifier is protected against short circuit to ground.
The 16-pin DAC714 is available in a plastic 0.3" DIP, ceramic
0.3" CERDIP, and wide-body plastic SO package. The
DAC714P, U, HB, and HC are specified over the –40°C to
+85°C temperature range while the DAC714HL is specified
over the 0°C to +70°C range.