FEATURES
Scientifi c-grade accuracy, ±2 counts
Low power, typically 12.5mW
Miniature size: 2.17" x 0.92" x 0.43" (55mm x 23mm x 11mm)
Large (0.4”/10.2mm), enhanced-contrast, LCD display
Backlit displays optional
Epoxy-encapsulated, 12-pin DIP
Panel or pc-board mountable
3 differential, dual, input voltage ranges
Single +5V supply or 9V battery
User-selectable decimal point placement
Low-battery "BAT" annunciator
0 to +50°C temperature range
Low Cost

APPLICATIONS
DMS-40LCD meters are available in either 5V-powered or 9V-powered models. 9V devices operate directly from 7.5V to 14V supplies (usually batteries) without the need for external voltage regulators. 9V devices, however, can not be used to measure voltages referenced to the negative battery terminal (pin 3) because the minus input to the meter (pin 12, (–) INPUT LO) must always be at least 1.5V above pin 3. 9V-powered meters can only be used to make differential and not single-ended measurements.
5V-powered devices operate from any well-regulated +5V supply and will accurately measure voltages both above and below pin 3 (5V RETURN) in either single-ended or differential confi gurations.