Benefits and Features
● 1 x 4, 2 x 4, or 1 x 8 OLDI Output Lane Configurations
● 3Gbps or 6Gbps Forward Link Rates for System and
Power Flexibility
● Full-Duplex Capability Over a Single Wire
● Supports Up to 300MHz PCLK
● Supports Video Replication and Dual-View Splitting for
Driving Two Displays
● Uses Low-Cost 50Ω Coax or 100Ω STP Cables
● Forward and Reverse I2S or 7.1 TDM Audio
● Optional Internal VDD Regulator
● ASIL-Relevant Functional Safety Features
• ASIL-B Compliant
• 16-Bit CRC Protection of Control Channel Data
(I2C, UART, SPI, GPIO, Audio)
Retransmission of All Control Channel Data (I2C,
UART, SPI, GPIO, Audio) Upon Error Detection
• Optional 32-Bit Video Line Cyclic Redundancy
Check (CRC)
• Selectable Interrupts for Fault Detection
• Video Watermark Detection
● Performance Tools Ensure High Link Margin
• Continuous Adaptive Equalization on GMSL links
• Forward and Reverse Channel Pseudorandom
Binary Sequence (PRBS) Generator and Checker
for BER Testing of Serial I/O Links
• Eye-Opening Monitor for Continuous Link Margin
Diagnosis
● Concurrent Control Channel for Device Configuration
and Communicating with Remote Peripherals
• I2C, UART, Pass-Through I2C/UART, SPI, and
Tunneled or Register-Programmable GPIO
• Settable Priority Levels
• Eight Hardware Programmable Device Addresses
• Up to 14 Programmable General Purpose Input/
Output (GPIO)
• Sleep Mode with Register State Retention
● Compact 8mm x 8mm TQFN Package with Exposed Pad

Applications
● Cluster and Heads-Up Displays
● Central Information Displays
● Rear-Seat Infotainment Displays