MCF52110 ColdFire Microcontroller

The MCF52110 is a member of the ColdFire® family of reduced instruction set computing (RISC) microprocessors. This document provides an overview of the 32-bit MCF52110 microcontroller, focusing on its highly integrated and diverse feature set.
This 32-bit device is based on the Version 2 ColdFire core operating at a frequency up to 80 MHz, offering high performance and low power consumption. On-chip memories connected tightly to the processor core include up to 128 Kbytes of flash memory and 16 Kbytes of static random access memory (SRAM). On-chip modules include:

• V2 ColdFire core delivering 76 MIPS (Dhrystone 2.1) at 80 MHz running from internal flash memory with Multiply Accumulate (MAC) Unit and hardware divider
• Up to three universal asynchronous/synchronous receiver/transmitters (UARTs)
• Two inter-integrated circuit (I2C™) bus interface modules
• Queued serial peripheral interface (QSPI) module
• Eight-channel 12-bit fast analog-to-digital converter (ADC) with simultaneous sampling
• Four 32-bit input capture/output compare timers with DMA support (DTIM)
• Four-channel general-purpose timer (GPT) capable of input capture/output compare, pulse width modulation (PWM), and pulse accumulation
• Eight-channel/Four-channel, 8-bit/16-bit pulse width modulation timer
• Two 16-bit periodic interrupt timers (PITs)
   – Real-time clock (RTC) module with 32 kHz crystal
• Programmable software watchdog timer
   – Secondary watchdog timer with independent clock
• Interrupt controller capable of handling 57 sources
• Clock module with 8 MHz on-chip relaxation oscillator and integrated phase-locked loop (PLL)
• Test access/debug port (JTAG, BDM)