1. General description
The 74HC166-Q100; 74HCT166-Q100 is an 8-bit serial or parallel-in/serial-out shift register. The
device features a serial data input (DS), eight parallel data inputs (D0 to D7) and a serial output
(Q7). When the parallel enable input (PE) is LOW, the data from D0 to D7 is loaded into the shift
register on the next LOW-to-HIGH transition of the clock input (CP). When PE is HIGH, data enters
the register serially at DS with each LOW-to-HIGH transition of CP. When the clock enable input
(CE) is LOW data is shifted on the LOW-to-HIGH transitions of CP. A HIGH on CE disables the CP
input. Inputs include clamp diodes which enable the use of current limiting resistors to interface
inputs to voltages in excess of VCC.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100
(Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
• Automotive product qualification in accordance with AEC-Q100 (Grade 1)
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C
• Wide supply voltage range from 2.0 V to 6.0 V
• CMOS low power dissipation
• High noise immunity
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• Synchronous parallel-to-serial applications
• Synchronous serial input for easy expansion
• Input levels:
• For 74HC166-Q100: CMOS level
• For 74HCT166-Q100: TTL level
• Complies with JEDEC standards:
• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)
• ESD protection:
• MIL-STD-883, method 3015 exceeds 2000 V
• HBM JESD22-A114F exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C