Features
STM32 microcontroller in LQFP144 package
Two types of extension resources:
– ST Zio connector including: support for
Arduino™ Uno V3 connectivity (A0 to A5,
D0 to D15) and additional signals exposing
a wide range of peripherals
– ST morpho extension pin header footprints
for full access to all STM32 I/Os
On-board ST-LINK/V2-1
debugger/programmer with SWD connector:
– Selection-mode switch to use the kit as a
standalone ST-LINK/V2-1
– USB re-enumeration capability. Three
different interfaces supported on USB:
virtual COM port, mass storage, debug port
Flexible board power supply:
– 5 V from ST-LINK/V2-1 USB VBUS
– External power sources: 3.3 V and 7 - 12 V
on ST Zio or ST morpho connectors, 5 V on
ST morpho connector
USB OTG or full-speed device with Micro-AB
connector (depending on STM32 support)
Three user LEDs
Two push-buttons: USER and RESET
LSE crystal:
– 32.768 kHz crystal oscillator
Comprehensive free software HAL library
including a variety of software examples
Support of wide choice of Integrated
Development Environments (IDEs) including
IAR™, Keil®, GCC-based IDEs.
Description
The STM32 Nucleo-144 board (NUCLEOL496ZG)
provides an affordable and flexible way
for users to try out new concepts and build
prototypes with the STM32 microcontroller,
choosing from the various combinations of
performance, power consumption and features.The ST Zio connector, which extends the
Arduino™ Uno V3 connectivity, and the ST
morpho headers provide an easy means of
expanding the functionality of the Nucleo open
development platform with a wide choice of
specialized shields. The STM32 Nucleo-144
board does not require any separate probe as it
integrates the ST-LINK/V2-1
debugger/programmer. The STM32 Nucleo-144
board comes with the STM32 comprehensive
software HAL library and various packaged
software examples.