FEATURES
► 4.7 Ω maximum on resistance at 25°C at ±15 V dual supply
► 0.5 Ω typical on-resistance flatness at 25°C at ±15 V dual supply
► Fully specified at ±15 V, +12 V, and ±5 V
► VL supply for low-logic level compatibility
► 1.8 V JEDEC standard compliant (JESD8-7A)
► 1.2 V JEDEC standard compliant (JESD8-12A.01)
► Rail-to-rail operation
► Break-before-make switching action
► 24-lead, 4 mm × 4 mm LFCSP

APPLICATIONS
► FPGA and microcontroller systems
► Relay replacement
► Audio and video routing
► Automatic test equipment
► Data acquisition systems
► Communication systems

GENERAL DESCRIPTION
The ADG1408L is a monolithic iCMOS® eight channel analog multiplexer.
The ADG1408L switches one of eight inputs to a common
output, as determined by the 3-bit binary address lines, A0, A1, and
A2. An EN input is used to enable or disable the device. When
disabled, all channels are switched off. When on, each channel
conducts equally well in both directions and has an input signal
range that extends to the supplies.
An external low voltage VL supply provides flexibility for lower logic
control. The ADG1408L is both 1.2 V and 1.8 V JEDEC standardcompliant.