Features
• Low-Cost, HC05 Core MCU in 20-Pin Package (MC68HC05JJ6)
or 28-Pin Package (MC68HC05JP6)
• 6160 Bytes of User ROM, Including 8 Bytes of Security Code and
16 Bytes of User Vectors
• 224 Bytes of Low-Power User RAM (4 Transistor RAM)
• 16-Bit Programmable Timer with Input Capture and Output
Compare
• 15-Stage Core Timer, Including 8-Bit Free-Running Counter
and 4-Stage, Selectable Real-Time Interrupt Generator
• Simple Serial Input/Output Port (SIOP) with Interrupt Capability
• Two Voltage Comparators which Can be Combined with the 16-
Bit Programmable Timer to Create a 4-Channel, Single-Slope
Analog-to-Digital (A/D) Converter
• Voltage Comparator 1 Output Can Drive the PB4 Port Pin Directly
under Software Control
• 14 Input/Output (I/O) Lines (MC68HC05JJ6) or 22 I/O Lines
(MC68HC05JP6), Including High-Source/Sink Current Capability
on Six I/O Pins (MC68HC05JJ6) or 14 I/O Pins (MC68HC05JP6)
• Mask Option Selectable Software Programmable Pulldowns on All
I/O Pins and Keyboard Scan Interrupt on Four I/O Pins
• Software Mask and Request Bit for IRQ Interrupt with Mask Option
Selectable Sensitivity on IRQ Interrupt (Edge- and Level-Sensitive
or Edge-Only)
• ROM Security Bytes1 to Aid in Locking Out Access to ROM Array
• Mask Option Selectable Computer Operating Properly (COP)
Watchdog System
• On-Chip Temperature Measurement Diode
• Mask Option Selectable Low-Voltage Inhibit to Reset CPU in Low-
Voltage Conditions
• On-Chip Oscillator with Device Selection of Crystal/Ceramic
Resonator or RC Operation and Mask Option Selectable Shunt
Resistor, Approximately 2 MΩ
• Internal Oscillator for Lower-Power Operation, Approximately
100 kHz (500 kHz Selected as a Mask Option)
• Power-Saving Stop Mode and Wait Mode Instructions (Mask
Option Selectable STOP Conversion to Halt and Separate Mask
Option for Fast 16-Cycle Restart)
• Illegal Address Reset
• Internal Steering Diode and Pullup Device on RESET Pin to VDD