General Description
The 810001-22 is a PLL based synchronous clock generator that is
optimized for digital video clock jitter attenuation and frequency
translation. The device contains two internal frequency multiplication
stages that are cascaded in series. The first stage is a VCXO PLL
that is optimized to provide reference clock jitter attenuation, and to
support the complex PLL multiplication ratios needed for video rate
conversion.
The second stage is a FemtoClock™ frequency multiplier that
provides the low jitter, high frequency video output clock.
Preset multiplication ratios are selected from internal lookup tables
using device input selection pins. The multiplication ratios are
optimized to support common video rates used in professional video
system applications. The VCXO requires the use of an external,
inexpensive pullable crystal. Two crystal connections are provided
(pin selectable) so that both 60 and 59.94Hz base frame rates can
be supported. The VCXO requires external passive loop filter
components which are used to set the PLL loop bandwidth and
damping characteristics.

Features
• Jitter attenuation and frequency translation of video clock signals
• Supports SMTPE 292M, ITU-R Rec. 601/656 and
MPEG-transport clocks
• Support of High-Definition (HD) and Standard-Definition (SD) pixel
rates
• Dual VCXO-PLL supports both 60 and 59.94Hz base frame rates
in one device
• Dual PLL mode for high-frequency clock generation (32.967MHz
to 162MHz)
• VCXO-PLL mode for low-frequency clock generation (27MHz and
26.973MHz)
• One LVCMOS/LVTTL PLL clock output
• Two selectable LVCMOS/LVTTL input clocks
• LVCMOS/LVTTL compatible control signals
• RMS phase jitter @148.5MHz, using a 27MHz crystal
(12kHz – 20MHz): 1.01ps (typical)
• 3.3V supply voltage
• 0°C to 70°C ambient operating temperature
• Available in a lead-free (RoHS 6) 32-VFQFN package
• Use replacement part: 8T49N241-dddNLGI