1 Features
• AEC-Q100 qualified for automotive applications:
– Temperature grade 1: –40°C to +125°C, TA
• ADC Core:
– Resolution: 9 Bit
– Non-interleaved architecture
– Internal dither reduces high-order harmonics
• Performance specifications:
– SNR (–1 dBFS, 97 MHz): 53.5 dBFS
– ENOB (–1 dBFS, 97 MHz): 8.51 Bits
– SFDR (–1 dBFS, 97 MHz): 64 dBFS
– Noise floor (–20 dBFS, 97 MHz): –140.5
dBFS/Hz
• Full-scale input voltage: 800 mVPP-DIFF
• Full-power input bandwidth: 6 GHz
• JESD204C Serial data interface:
– Support for 2 to 8 (Quad/Dual channel) or 1 to 4
(Single channel) total SerDes lanes
– Maximum baud-rate: 17.16 Gbps
– 64B/66B and 8B/10B encoding modes
– Subclass-1 support for deterministic latency
– Compatible with JESD204B receivers
• Optional internal sampling clock generation
– Internal PLL and VCO (7.2–8.2 GHz)
• SYSREF Windowing eases synchronization
• Four clock outputs simplify system clocking
– Reference clocks for FPGA or adjacent ADC
– Reference clock for SerDes transceivers
• Timestamp input and output for pulsed systems
• Power consumption (800 MSPS):
– Quad Channel: 420 mW / channel
– Dual channel: 555 mW / channel
– Single channel: 840 mW
• Power supplies: 1.1 V, 1.9 V

2 Applications
• Light detection and ranging (LiDAR)

3 Description
ADC09xJ800-Q1 is a family of quad, dual and
single channel, 9-bit, 800 MSPS analog-to-digital
converters (ADC). Low power consumption, high
sampling rate and 9-bit resolution makes the
ADC09xJ800-Q1 suited for light detection and ranging
(LiDAR) systems. The ADC09xJ800-Q1 is qualified
for automotive applications.
Full-power input bandwidth (-3 dB) of 6 GHz provides
flat frequency response for frequency modulated
continuous wave (FMCW) LiDAR systems and
provides a narrow impulse response for pulse-based
systems. The full-power input bandwidth also enables
direct RF sampling of up to 4 GHz.