Product specification
• splice distributor for TH35 rail without front cover
• gray housing
• with or without splice tray with crimp splice holder (CSH) for up to 12 splices
• installation of two shrink splice holders (SSH)on splice tray is possible
• with fiber reservoir
• custom-labeled identification strips
• fastening on top hat rail by means of very sturdy top hat rail holder
• various mounting versions on rail
• for different front plates 3RU/7HP
• cable feed from top or bottom, straight or inclined, with M20 cable gland (up to 2 possible)
• width: 50 mm, height: 128 mm, depth: 132.5 mm (from rail, without adapters)
• feed of pre-terminated cables is possible
• one cable gland M20 with strain relief included in the delivery
• housing cover fastening by means of just one screw
• variants: with and without splice tray
• Please note: not all front plates 3RU/7HP available on the market can be used for OpDAT REGpro. If pre-terminated cables are used, we
recommend the version without splice tray.