Description
The SLR Series has no isolation between the control switch
input and the solid-state output. Select the SLR for applications
where the control switch is the same voltage source as the
load. Provides the noiseless, reliability and long life of a
solid-state relay, without the cost of isolation circuitry. The
SLR Series offers random switching and is normally used for
inductive loads. When fully insulated female terminals are used
on the connection wires, the system meets the requirements
for touch-proof connections.
Operation
The solid-state output is located between terminals 1 and 2
and can be ordered as either normally open or normally closed,
when voltage is applied and S1 is open. When S1 is closed, the
solid-state output between terminals 1 and 2 closes (or opens).
If S1 is opened, the solid-state output will open (or close).
Reset: Opening S1 resets the output to its original state. Reset
is also accomplished by removing input voltage.