The NCP1380 hosts a high−performance circuitry aimed to
powering quasi−resonant converters. Capitalizing on a proprietary
valley−lockout system, the controller shifts gears and reduces the
switching frequency as the power loading becomes lighter. This
results in a stable operation despite switching events always occurring
in the drain−source valley. This system works down to the 4th valley
and toggles to a variable frequency mode beyond, ensuring an
excellent standby power performance.
To improve the safety in overload situations, the controller includes
an Over Power Protection (OPP) circuit which clamps the delivered
power at high−line. Safety−wise, a fixed internal timer relies on the
feedback voltage to detect a fault. Once the timer elapses, the
controller stops and stays latched for option A and C or enters
auto−recovery mode for option B and D.
Particularly well suited for adapter applications, the controller
features a pin to implement either a combined overvoltage /
overtemperature protection (Version A and B) or a combined
brown−out/overvoltage protection (Version C and D).

Features
• Quasi−Resonant Peak Current−Mode Control Operation
• Valley Switching Operation with Valley−Lockout for Noise−Immune
Operation
• Frequency Foldback at Light Load to Improve the Light Load
Efficiency
• Adjustable Over Power Protection
• Auto−Recovery or Latched Internal Output Short−Circuit Protection
• Fixed Internal 80 ms Timer for Short−Circuit Protection
• Combined Overvoltage and Overtemperature Protection (A and B
Versions)
• Combined Overvoltage Protection and Brown−Out (C and D
Versions)
• +500 mA/−800 mA Peak Current Source/Sink Capability
• Internal Temperature Shutdown
• Direct Optocoupler Connection
• Extended VCC Range Operation Up to 28 V
• Extremely Low No−Load Standby Power
• SO−8 Package
• These Devices are Pb−Free and are RoHS Compliant

Typical Applications
• High Power ac−dc Converters for TVs, Set−Top Boxes etc.
• Offline Adapters for Notebooks