Analog Peripherals
    10-Bit ADC
        - ±1 LSB INL; no missing codes
        - Programmable throughput up to 100 ksps
        - 8 external inputs; programmable as single-ended or differential
        - Data-dependent windowed interrupt generator
        - Built-in temperature sensor (±3 °C)
    Two Comparators
        - 16 programmable hysteresis values
        - Configurable to generate interrupts or reset
    Internal Voltage Reference
    VDD Monitor/Brown-out Detector
On-Chip JTAG Debug & Boundary Scan
    - On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required)
    - Provides breakpoints, single stepping, watchpoints, stack monitor
    - Inspect/modify memory and registers
    - Superior performance to emulation systems using ICE-chips, target pods, and sockets
    - IEEE1149.1 compliant boundary scan
Supply Voltage: 2.8 to 3.6 V
    - Typical operating current: 12.5 mA at 25 MHz
    - Multiple power saving sleep and shutdown modes
Temperature Range: –40 to +85 °C
High-Speed 8051 µC Core
    - Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks
    - Up to 25 MIPS throughput with 25 MHz system clock
    - Expanded interrupt handler
Memory
    - 1280 bytes data RAM
    - 16 kB Flash; in system programmamble in 512-byte sectors (512 bytes are reserved)
Digital Peripherals
    - 32 port I/O; all are 5 V tolerant
    - Hardware SMBus™ (I2C™ compatible), SPI™, and UART serial ports available concurrently
    - Programmable 16-bit counter/timer array with five capture/compare modules
    - 4 general-purpose 16-bit counter/timers
    - Dedicated watchdog timer; bidirectional reset
Clock Sources
    - Internal programmable oscillator: 2–16 MHz
    - External oscillator: Crystal, RC, C, or Clock
    - Can switch between clock sources on-the-fly
Package
    - 64-pin TQFP (standard lead and lead-free packages)
Ordering Part Numbers
    - Lead-free package: C8051F018-GQ
    - Standard package: C8051F018