Features
• Programmable for stand alone operation with Applied
Motion’s easy to use Si Programmer™ Windows software
(software and programming cable included)
• Can be operated in real time from a host PC or PLC using Applied
Motion’s Si Command Language™ (SCL)
• Can be networked with all other Si™ products via Applied
Motion’s SiNet™ Hub
• DC bus voltage 24-80 VDC motor supply (including ripple)
• Software selectable from 0.8–7.0 amps/phase motor current
• Software selectable Step resolutions from 2,000 to 50,800
steps per revolution
• Software selectable idle current reduction 0%, 25%, 50%
or 100%
• 8 user programmable inputs
• 3 optically isolated 24 VDC outputs
• Short circuit and over temperature protection
• Communication via RS232
• 560 watts of usable power
• Screw terminal connector blocks for power and motor,
Wago cage clamp connector for I/O. RJ11 for RS232 port
• MOSFET, dual H-bridge, inaudible PWM amplifier
• 3 state, pulse width modulated current control, switching at
20–30 kHz
• Optional operator terminal (MMI) either standard or backlit
• Drives 4, 6 or 8 lead size 11, 14, 17, 23 and 34 step motors
• CE compliant
Description
The 7080i is a programming step motor driver suitable for a wide
range of motion control applications. It includes a sophisticated
controller integrated with a 560-watt microstepping amplifier.
The 7080i includes Applied Motion’s easy to use Si Programmer
™ Windows software for the rapid development of stand
alone motion control programs. The 7080i can also be commanded
in real time from a host PC or PLC, using the Si Command
Language™.
For multi-axis applications, up to eight Applied Motion Si™
drives (stepper or Servo) can be networked using a single
SiNet™ Hub.
The 7080i includes 8 programmable inputs for triggering,
branching, position sensing and end of travel detection. 3 optically
isolated programmable outputs can send signals to other
electronic devices and activate relays.
The 7080i is a PC board mounted on an aluminum angle heat
transfer chassis. Drive dimensions are 2˝ by 3˝ by 6˝.