Features

ESD Protection for 1 Line with Bi-directional

Provide ESD protection for the protected line to
IEC 61000-4-2 (ESD) ±25kV (air), ±25kV (contact)
IEC 61000-4-4 (EFT) 80A (5/50ns)
IEC 61000-4-5 (Lightning) 7.5A (8/20μs)
Cable Discharged Event (CDE)

Suitable for, 8V and below, operating voltage
applications

0402 small DFN package saves board space

Protect one I/O line or one power line

Fast turn-on and Low clamping voltage

Solid-state silicon-avalanche and active circuit
triggering technology

Green Part
Applications

Mobile Phones

Hand Held Portable Applications

Small Panel Modules

PDA’s

Digital Cameras

Touch Panels

Notebooks and Handhelds

MP3 players

Peripherals
Description
AZ4808-01F is a design which includes one
bi-directional ESD rated clamping cell to protect
one power line, or one control line, or one low
speed data line in an electronic systems. The
AZ4808-01F has been specifically designed to
protect sensitive components which are
connected to data and transmission lines from
over-voltage caused by Electrostatic Discharging
(ESD), Electrical Fast Transients (EFT),
Lightning, and Cable Discharge Event (CDE).
AZ4808-01F is a unique design which includes
proprietary clamping cell in a single package.
During transient conditions, the proprietary
clamping cell prevents over-voltage on the power
line or control/data lines, protecting any
downstream components.
AZ4808-01F is bi-directional and may be used on
lines where the signal swings above and below
ground.
AZ4808-01F may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(±15kV air, ±8kV contact discharge).