Features
■ Motor supply voltage: VM ≤ 15 V (max)
■ Control supply voltage: VCC = 2.7 V to 6 V
■ Output current: Iout ≤ 0.8 A (max)
■ Low ON-resistance: 1.5 Ω (upper side + lower side typ. @ VM = 5 V)
■ Constant-current control (PWM chopper drive)
■ Standby (power-saving) mode
■ On-chip thermal shutdown circuit (TSD)
■ Compact package: SSOP-16 z This product has a MOS structure and is sensitive to electrostatic discharge. When handling the product, ensure that the environment is protected against electrostatic discharge by using an earth strap, a conductive mat and an ionizer. Ensure also that the ambient temperature and relative humidity are maintained at reasonable levels. z Install the product correctly. Otherwise, breakdown, damage and/or degradation in the product or equipment may result. Weight: 0.07 g (typ.) TENTATIVE TB6598FNG: TB6598FNG is a Pb-free product. The following conditions apply to solderability: *Solderability 1. Use of Sn-63Pb solder bath *solder bath temperature = 230°C *dipping time = 5 seconds *number of times = once *use of R-type flux 2. Use of Sn-3.0Ag-0.5Cu solder bath *solder bath temperature=245°C *dipping time = 5 seconds *the number of times = once *use of R-type flux