Features
■ Two part paste adhesive meeting requirements of
■ FAR/JAR 25.853 and ABD0031
■ Excellent adhesion characteristics to aircraft interior
■ substrates including thermoplastics
■ Availability in duo-pack cartridges or in bulk for
■ machine dispensing
■ Flow control for vertical applications
■ Halogen and heavy metal compound free FST system Product Characterization The following technical information and data should be considered representative or typical only and should not be used for specification purposes. General properties Part B Part A Colour Off-white Light Yellow Base Modified epoxy Modified amine Consistency Thixotropic paste, low sag Thixotropic paste, low sag Brookfield viscosity SP7 - 20 RPM 100 Pas 109 Pas Specific gravity 1.61 g/cm³ 1.27 g/cm³ Mix ratio by volume (by weight) 100 (100) 100 (79) Specific gravity (mix) 1.44 g/cm³ (calculated) Work life at 23 ± 2 °C > 90 minutes for 20 g mix at 23 ± 2 °C Typical time to handling strength (a) Around 5 hours at 23 ± 2 °C Cure cycle 7 days at 23 ± 2°C or 12 to 24 hours at RT followed by 60 min at 80 ± 5 °C. For further details see “Instructions for use” on page 4. Service temperature range -55 °C to 80 °C Shelf life 12 months from date of shipment at 20 ± 5 °C (a) Time to reach 1 MPa overlap shear strength Technical Data Sheet Aerospace