Features
■ Works in demanding conditions and retains flexibility in autoclave conditions in temperatures ranging from -60°F (-50°C) to 350°F (176°C)
■ Higher heat resistance as compared with acrylics
■ Silicone adhesive provides clean removal from a variety of surfaces
■ Translucent green backing is easily identifiable for splicing applications
■ Chemical resistant adhesive and backing provides durability in difficult environments 3M tape 8402 Adhesion to Steel: 23 oz./in. width (25 N/100 mm) D-3330 Tensile Strength at Break: 25 lbs./in. width (438 N/100 mm) D-3759 Elongation at Break: 125% D-3759 Backing Thickness: 0.92 mils (0.02 mm) D-3652 Total Tape Thickness: 1.9 mils (0.05 mm) D-3652 Short Term -60°F to 425°F (-50°C to 218°C) Temperature Use Range: Removes cleanly and remains flexible after 3 hours, 350°F (177°C), in autoclave. 3M tape 8403 Adhesion to Steel: 25 oz./in. width (27 N/100 mm) D-3330 Tensile Strength at Break: 41 lbs./in. width (718 N/100 mm) D-3759 Elongation at Break: 140% D-3759 Backing Thickness: 1.4 mils (0.04 mm) D-3652 Total Tape Thickness: 2.4 mils (0.06 mm) D-3652 Short Term -60°F to 425°F (-50°C to 218°C) Temperature Use Range: Removes cleanly and remains flexible after 3 hours, 350°F (177°C), in autoclave.