General Description
The MAX2374 silicon-germanium (SiGe), switchable gain, variable-linearity, low-noise amplifier (LNA) is designed for cellular-band, code-division multiple access (CDMA). It can be used for applications such as TDMA and PDC or wherever high dynamic range and low noise are required. This LNA provides a high intermodulation intercept point (IIP3), which is adjustable to meet specific system requirements by selecting an appropriate external resistor. To achieve high gain and low noise, the LNA is packaged in a tiny ultra-chip-scale package (UCSP) with six solder bumps. The LNA operates from a +2.7V to +5.5V single supply and consumes just 8.5mA while achieving a +6.2dBm input IIP3. Supply current reduces to less than 1µA in shutdown mode.

Features
♦ +2.7V to +5.5V Single Supply
♦ Low Operating Current
    8.5mA for High Linearity
    4.5mA for Paging
    4.1mA in Low-Gain, High-Linearity Mode
♦ Low Noise Figure: 1.5dB Cellular
♦ Adjustable IIP3
♦ Two Gain Settings
♦ < 1µA Shutdown Mode
♦ Ultra-Small 6-Bump UCSP (1mm x 1.5mm)

Applications
    CDMA Phones
    TDMA Phones
    Wireless Local Loop (WLL)
    GSM Handsets
    Land Mobile Radio
    Wireless Data