Features
Video Decoder
• NTSC (M, 4.43) and PAL (B, D, G, H, I, M, N, N combination), PAL (60), SECAM support with automatic format detection
• Software selectable analog input control
• Built-in analog anti-alias filter
• Fully programmable static gain or automatic gain control for the Y channel
• Programmable white peak control for the Y channel
• 4-H adaptive comb filter Y/C separation
• PAL delay line for color phase error correction
• Image enhancement with peaking and CTI
• Digital sub-carrier PLL for accurate color decoding
• Digital Horizontal PLL for synchronization processing and pixel sampling
• Advanced synchronization processing and sync detection for handling non-standard and weak signal
• Programmable hue, brightness, saturation, contrast, and sharpness
• Automatic color control and color killer
• Chroma IF compensation
• VBI slicer supporting CC and WSS data services
• Programmable output control

Analog Video Input
• Triple 10-bit ADCs with independent clamping and gain control
• Supports 480i/480p/576i/576p analog component input with SOG

Digital Output
• ITU-R 656 compatible YCbCr(4:2:2) output format
• Progressive ITU-R 656 output format support for both interlaced and progressive inputs

Miscellaneous
• Two wire MPU serial bus interface
• Power save and Power down mode
• Low power consumption
• Single 27MHz crystal for all operations
• 3.3V tolerant I/O
• 1.8V/3.3 V power supply
• 48 pin QFN package