Description
Scotch® Super 33+™ Vinyl Electrical Tape is a premium grade, 7 mil thick, all-weather vinyl-insulating tape. It is designed to perform continuously in ambient temperatures up to 105°C (220°F). The tape is conformable for cold weather application down to -18°C (0°F). It has excellent resistance to abrasion, moisture, alkalies, acids, corrosion and varying weather conditions (including ultraviolet exposure). The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk. Scotch® Super 33+™ Vinyl Electrical Tape is UL Listed and is a Canadian Standards Association (CSA) Certified “Insulating Tape.”  UL Listed; UL 510 Standard “Insulating Tape” (product category OANZ), File E129200  CSA Certification; Standard C22.2 No.197-M1983 “PVC Insulating Tape,” File LR 48769  Polyvinyl chloride (PVC) backing.  Pressure-sensitive rubber based adhesive.  Compatible with solid dielectric cable insulations.  Compatible with rubber and synthetic splicing compounds, as well as epoxy and polyurethane resins.  Inhibits corrosion of electrical conductors.  For indoor or outdoor applications.

Applications
■ Primary electrical insulation for all wire and cable splices rated up to 600 volts and up to 105°C (220°F).
■ Primary electrical insulation for 600 volt bus applications, and protective jacketing for low and high voltage bus.
■ Protective jacketing for high voltage cable splices and repairs.
■ Harnessing of wires and cables. Specifications Scotch® Super 33+™ Vinyl Electrical Tape is based on polyvinyl chloride (PVC) and/or its copolymers and has a rubber-based, pressure-sensitive adhesive. The tape shall be 7 mils thick, and be UL Listed and marked per UL Standard 510 as “Flame Retardant, Cold and Sunlight Resistant.” The tape must be applicable at temperatures ranging from 0°F through 100°F (-18°C through 38°C) without loss of physical properties. The tape shall be classified for use in both indoor and outdoor environments. The tape shall be compatible with synthetic cable insulations, jackets and splicing compounds. The tape will remain stable and will not telescope more than 0.1 inches when maintained at temperatures below 120°F (50°C).