DESCRIPTION
The µPD168102 is a monolithic 6-channel H bridge driver IC consisting of a CMOS controller and a MOS output stage. Because it uses a MOS process, this driver IC consumes less current and loses less voltage at the output stage than conventional driver ICs that use bipolar transistors. In addition, the µPD168102 employs P-channel MOSFETs in its output stage, eliminating the need for an on-chip the charge pump circuit. Therefore, the current consumption during circuit operation can be significantly reduced.

FEATURES
○ Six H bridge circuits employing power MOSFETs
○ Voltage drive type: 4 channels, current drive type (constant current chopping type): 2 channels
○ Low current consumption due to elimination of charge pump circuit
○ Input logic frequency: 100 kHz supported
○ 3 V power supply supported
    Minimum operating supply voltage: 2.5 V
○ Low voltage malfunction prevention circuit
    Internal circuit shutdown at VDD < 2.5 V
○ On-chip overheat protection circuit
○ 48-pin WQFN (7 mm × 7 mm)