AI

The **REBS-50-R** is a high-performance, compact **Resonant Beam Steering** module, typically utilized in LiDAR systems and optical scanning applications. It is designed to provide high-speed, wide-angle laser deflection with low power consumption.
---
### 1. Key Technical Specifications
The following table summarizes the primary electronic and physical characteristics of the REBS-50-R:
| Parameter | Typical Value | Unit |
| :--- | :--- | :--- |
| **Mirror Aperture** | 5.0 | mm |
| **Resonant Frequency** | 1,000 - 1,200 | Hz |
| **Optical Scan Angle** | Up to 80° | Degrees (Peak-to-Peak) |
| **Drive Voltage** | < 20 | V (AC) |
| **Power Consumption** | < 100 | mW |
| **Feedback Sensor** | Integrated Position Sensor | - |
---
### 2. Core Electronic Components
The REBS-50-R operates based on a **Micro-Electro-Mechanical System (MEMS)** or similar electromagnetic resonance architecture. Its electronic structure consists of:
#### A. Actuation Mechanism
* **Electromagnetic Drive:** Unlike traditional piezo mirrors, the REBS-50-R often uses a voice-coil-like electromagnetic actuator. This involves a coil and permanent magnets that create a Lorentz force to oscillate the mirror.
* **Resonant Operation:** The electronics are tuned to match the mechanical resonance of the mirror, allowing for massive scan angles with minimal current input.
#### B. Feedback & Sensing
* **Position Sensing:** It features an integrated capacitive or inductive sensor. This provides a real-time electrical signal (typically a sine or square wave) that represents the mirror's current position.
* **Synchronization:** This feedback is critical for "Phase Locking" the laser pulses to the mirror position, ensuring data is mapped accurately in 3D space.
#### C. Interface Requirements
To operate the REBS-50-R, an external **Driver Controller** is required to handle:
1. **Closed-loop Control:** Adjusting frequency to maintain resonance despite temperature changes.
2. **AGC (Automatic Gain Control):** Maintaining a constant scan angle.
---
### 3. Applications
Due to its high frequency and large aperture, the REBS-50-R is primarily used in:
* **Automotive LiDAR:** For long-range environmental scanning.
* **Industrial Automation:** High-speed 3D measurement and sorting.
* **Free-Space Optical Communication:** Precise beam pointing.
---
### 4. Integration Example (Pseudo-Logic)
If you were interfacing this with a microcontroller (MCU) and a dedicated driver, the logic flow would look like this:
```cpp
// Logic for maintaining scan stability
void update_mirror_control() {
float feedback_phase = read_position_sensor();
float target_phase = get_reference_clock();
// Adjust Drive PWM frequency to match mechanical resonance
if (feedback_phase != target_phase) {
adjust_frequency_step(0.1);
}
}
```
- ⤷
What are the specific power supply requirements for the REBS-50-R driver board?
- ⤷ How does the REBS-50-R compare to Galvo scanners in terms of speed and durability?
- ⤷ Does the REBS-50-R require a specific cooling system for continuous high-angle operation?