AI

The **M24C01-RDS6T/G** is a low-power, serial I2C (Inter-Integrated Circuit) EEPROM (Electrically Erasable Programmable Read-Only Memory). It is manufactured by STMicroelectronics and is widely used for storing small amounts of configuration data or parameters in electronic circuits.
---
## 1. Technical Specifications
Below are the key technical parameters for the M24C01-RDS6T/G:
| Parameter | Specification |
| :--- | :--- |
| **Memory Size** | 1 Kbit (128 Bytes x 8 bits) |
| **Interface** | I2C Serial (2-wire) |
| **Supply Voltage (Vcc)** | 1.8V to 5.5V |
| **Clock Frequency** | 400 kHz (Fast Mode) |
| **Package Type** | TSSOP8 (Thin Shrink Small Outline Package) |
| **Temperature Range** | -40°C to +85°C (Industrial) |
| **Write Cycles** | 1 Million (approx.) |
| **Data Retention** | 40 Years (min) |
---
## 2. Pin Configuration
The device comes in an 8-pin TSSOP package. Understanding the pinout is essential for PCB design:
| Pin Number | Name | Function |
| :--- | :--- | :--- |
| 1, 2, 3 | E0, E1, E2 | **Chip Enable inputs:** Used to set the hardware address for the I2C bus. |
| 4 | Vss | **Ground:** 0V reference. |
| 5 | SDA | **Serial Data:** Bidirectional pin for transferring data. |
| 6 | SCL | **Serial Clock:** Input for the clock signal. |
| 7 | WC | **Write Control:** Hardware protection. If tied to Vcc, write operations are inhibited. |
| 8 | Vcc | **Supply Voltage:** Positive power supply. |
---
## 3. Key Electronic Characteristics
### I2C Communication Protocol
The chip operates as a **Slave** device on the I2C bus. It requires a **Start condition**, a **Device Select code** (addressing), and an **Acknowledge (ACK)** bit to confirm data reception.
### Write Protection (WC Pin)
This is a critical hardware safety feature.
- **WC at Vss (Ground):** The entire memory can be written to.
- **WC at Vcc (High):** The entire memory is write-protected, preventing accidental data corruption.
### Low Power Consumption
The "R" in the part number often signifies a specific voltage range or low-power optimization, making it ideal for battery-operated devices (e.g., wearables or remote sensors).
---
## 4. Part Number Breakdown
The suffix `/G` typically indicates that the part is **ECOPACK2** compliant (RoHS compliant and Halogen-free).
- **M24**: I2C Serial Access EEPROM.
- **C01**: 1 Kbit density.
- **R**: 1.8V to 5.5V operating voltage.
- **DS**: TSSOP8 package (3x4.4 mm body).
- **6**: Industrial temperature range (-40 to 85°C).
- **T**: Tape and Reel packaging.
- ⤷
How do the E0
- ⤷ E1
- ⤷ and E2 pins affect the I2C address of the device?
- ⤷ What is the maximum write cycle time for a single byte or page in this EEPROM?
- ⤷ Can this chip be used with a 3.3V microcontroller without level shifters?