LP2950L-50-S08-R
AI

## LP2950L-50-S08-R Overview
The **LP2950L-50-S08-R** is a low-dropout (LDO) linear voltage regulator manufactured by Microchip (originally National Semiconductor/Texas Instruments family lineage for the LP2950 series). The part number breaks down as follows:
| Code | Meaning |
|---|---|
| LP2950 | Base product family (micropower LDO regulator) |
| L | Low-power / lower-quiescent variant |
| 50 | Fixed output voltage of **5.0 V** |
| S08 | **SOIC-8** package |
| R | Tape-and-reel packaging |
---
### Key Electrical Characteristics
| Parameter | Typical Value |
|---|---|
| Output voltage | 5.0 V (fixed) |
| Output current | Up to 100 mA |
| Dropout voltage | ~40 mV at light load, ~380 mV at 100 mA (typical) |
| Quiescent current | ~75 µA (typical) |
| Input voltage range | Up to ~30 V (absolute maximum) |
| Output accuracy | ±0.5% (typical, depends on grade) |
| Operating temperature | -40 °C to +125 °C |
---
### Pin Configuration (SOIC-8)
| Pin | Name | Function |
|---|---|---|
| 1 | OUTPUT | Regulated 5 V output |
| 2 | INPUT | Unregulated supply input |
| 3 | GND | Ground |
| 4 | FEEDBACK | Error amplifier feedback (for adjustable use) |
| 5 | SHUTDOWN | Enable/disable control (active low) |
| 6 | ERROR | Open-collector flag output (signals low output voltage) |
| 7 | NC | No internal connection |
| 8 | NC | No internal connection |
*Note: Verify pin assignments against the official datasheet, as pinouts can vary by manufacturer and package revision.*
---
### Internal Functional Blocks
- **Bandgap voltage reference** – provides a stable reference voltage that is largely independent of temperature and supply variations.
- **Error amplifier** – compares the feedback voltage with the reference and drives the pass transistor.
- **PNP/PMOS pass element** – controls the current from input to output to hold the output at the regulated level.
- **Feedback divider (internal for fixed versions)** – sets the output voltage.
- **Shutdown logic** – disables the regulator to reduce current consumption to near zero.
- **Error flag comparator** – monitors the output and pulls the ERROR pin low if the output drops out of regulation (for example, due to overload or low input).
- **Thermal and current-limit protection** – protects the device from overheating and excessive output current.
---
### Typical Application Circuit
1. Connect the unregulated input (e.g., 7–12 V) to **INPUT** with a capacitor to GND (typically 1 µF or more, low-ESR recommended).
2. Connect **OUTPUT** to the load with an output capacitor (typically 1 µF or more; check datasheet for stability requirements).
3. Tie **SHUTDOWN** high to keep the regulator on, or drive it low to disable.
4. Use a pull-up resistor on **ERROR** if you want to monitor the output status.
---
### Design Considerations
- **Dropout:** Ensure input is sufficiently above 5 V plus dropout voltage at your load current.
- **Power dissipation:** P = (Vin − Vout) × Iout. Watch thermal limits at high input voltage and current.
- **Stability:** Use output capacitors meeting the ESR range specified in the datasheet.
- **Quiescent current:** Its low standby current makes it suitable for battery-powered designs.
---
### Typical Applications
- Battery-powered microcontroller systems
- Automotive and industrial 5 V rails
- Portable and low-power electronics
- Sensor and instrumentation power supplies
---
**Recommendation:** Always consult the latest official datasheet from the manufacturer for exact specifications, pin functions, and recommended layout.
- ⤷What is the difference between the LP2950 and LP2950L variants?
- ⤷ How do I calculate the power dissipation and heatsinking needs for this regulator?
- ⤷ What output capacitor should I use to keep the LP2950L-50 stable?