CA-RSPNFA020
AI

### Overview of CA-RSPNFA020
The **CA-RSPNFA020** is an industrial-grade **RF (Radio Frequency) Pigtail Cable Assembly**. It is primarily used to bridge the connection between high-frequency communication modules (like Wi-Fi, Bluetooth, or LTE cards) and external antennas.
---
### Technical Specifications
| Feature | Specification |
| :--- | :--- |
| **Connector A** | RP-SMA Female (Bulkhead) |
| **Connector B** | U.FL (IPEX) |
| **Cable Type** | 1.13mm Micro-Coaxial |
| **Impedance** | 50 Ohms |
| **Frequency Range** | DC to 6 GHz |
| **Length** | 200mm (approx. 8 inches) |
---
### Electronic Components & Anatomy
#### 1. U.FL (IPEX) Connector
* **Purpose:** This is the small, snap-on connector that attaches directly to a Printed Circuit Board (PCB).
* **Electronics:** It features a gold-plated center contact to minimize signal loss at high frequencies. It is designed for low-profile applications (laptops, embedded routers).
#### 2. RP-SMA Female Bulkhead Connector
* **Purpose:** The "Reverse Polarity SMA" is the standard interface for external antennas.
* **Structure:** The "Bulkhead" design includes a nut and washer, allowing it to be securely mounted through a hole in a metal or plastic chassis.
* **Polarity Note:** Unlike standard SMA, RP-SMA switches the pin and socket configuration to comply with certain FCC regulations regarding non-standard antenna connectors.
#### 3. 1.13mm Coaxial Cable
* **Shielding:** Uses a braided copper shield to prevent Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI).
* **Dielectric:** A thin layer of insulation (usually PTFE) separates the center conductor from the shield, maintaining the **50 Ohm characteristic impedance** required for efficient power transfer.
---
### Common Applications
* **Industrial IoT:** Connecting an internal Wi-Fi module to an external antenna on a control box.
* **Single Board Computers:** Used with Raspberry Pi (with add-on hats) or Jetson Nano modules.
* **Networking Gear:** Internal wiring for wireless routers and access points.
---
- ⤷
What is the difference between SMA and RP-SMA connectors?
- ⤷ How does the 50 Ohm impedance affect signal quality in this cable?
- ⤷ What are the installation precautions for the fragile U.FL connector?