CUSTOMER DRAWING

300 Constitution Dr

Menlo Park, CA

94025, U.S.A.

TITLE:

STUB SPLICE

SEALING SYSTEM

Unless otherwise specified dimensions are in millimeters.

[Inches dimensions are shown in brackets]

Raychem

Devices

DOCUMENT NO.:

D-436-58/-59

TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A

ROUGHNESS

IN MICRON

Tyco Electronics reserves the right to amend

this drawing at any time. Users should

evaluate the suitability of the product for

their application.

REV:

J

DATE:

November 3, 2010

REVISED BY:

UNGUYEN

CAGE CODE:

06090

ECO NUMBER:

ECO-10-022537

SCALE:

NTS

SIZE:

A

SHEET:

1 of 1

© 2004-2009 Tyco Electronics Corporation. All rights reserved.

If this document is printed it becomes uncontrolled. Check for the latest revision.

Dimensions Of Sub Splicer

I.D.

O.D.

Product Name

Color

Code

Max.

Weight

CMA

Range

min

max

min

max

D-436-58

Blue

1.4 lbs/Mpcs

779-

1.63

1.75

2.57

2.69

2680

(0.064)

(0.069)

(0.101)

(0.106)

D-436-59

Yellow

1.8 lbs/Mpcs

1900-

2.46

2.59

3.73

3.89

6755

(0.097)

(0.102)

(0.147)

(0.153)

MATERIAL

1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.

2. MELTABLE SEALING INSERT: Modified, immersion resistant thermoplastic. Color: natural.

3. MELTABLE SEALING INSERT: Modified, immersion resistant thermoplastic. Color: natural.

4. SEAMLESS STUB SPLICER:

BASE METAL: Copper alloy 101 or 102 per WW-T-775.

PLATING:

Tin per MIL-T-10727, Type 1.

APPLICATION

1. These parts are designed to provide an immersion resistant 2 wire stub splice, or a 2 to 1 parallel splice, made with having

insulations rated for 135 C minimum.

2. Recovered dimensions of insulation sleeve (Item1):

I.D.: .095 (2.4130) Max.

Wall: .013 (0.3302) Min.

3. For installation procedures refer to Tyco Electronics/Raychem’s “Miniseal D-436 Series Sealed Crimp Splice Products Installation

Guidelines.”