SPECIFICATION CONTROL DRAWING

Raychem

THERMOFIT

DEVICES

Raychem Corporation

300 Constitution Drive

Menlo Park, CA 94025

USA

TITLE:

SOLDERSLEEVE

SHIELD TERMINATOR

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.

INCHES DIMENSIONS ARE BETWEEN BRACKETS.

DOCUMENT NO. :

D-108-00/-01/-02/-03

TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A

ROUGHNESS IN

MICRON

Raychem reserves the right to amend this

drawing at any time. Users should evaluate

the suitability of the product for their

application.

DCR NUMBER:

D980867

REPLACES:

D961392

DRAWN BY:

M. FORONDA

DATE:

04/09/98

PROD. REV.

SEE TABLE

DOC ISSUE:

3

SCALE:

None

SIZE:

A

SHEET:

1 of 1

If this document is printed it becomes uncontrolled. Check for the latest revision.

Product Revision

Product Dimensions

Product Name

L MAX

øA min

øB min

D-108-00

F

17.25

(0.680)

1.9

(0.075)

2.4

(0.095)

D-108-01

F

17.25

(0.680)

2.8

(0.110)

3.15

(0.125)

D-108-02

E

17.25

(0.680)

4.4

(0.175)

5.0

(0.200)

D-108-03

F

20.5

(0.810)

7.1

(0.280)

7.6

(0.300)

MATERIAL

1. INSULATION SLEEVE: HEAT-SHRINKABLE, RADIATION CROSS-LINKED POLYVINYLIDENE

FLOURIDE. TRANSPARENT BLUE.

2. SOLDER PREFORM WITH FLUX:

Solder: Sn96 Ag4 per ANSI J-STD-006.

Flux: ROL1 per ANSI J-STD-004.

3 & 4. MELTABLE INSERTS: Polyolefin-based thermoplastic. Color : red.

NOTES

A. The parts covered by this SCD are for use in attaching a ground wire to the shield of a cable. They may

be used on cables rated for at least 135

°C minimum, having silver plated copper shields and meeting

the dimensional criteria shown in the table.

B. Parts will meet requirements of Raychem specification RT-1404 and National Aerospace Standard

NAS-1747 when installed per Raychem-approved convection or infrared tools in accordance with

Raychem assembly procedure RCPS-100-70.

TEMPERATURE RATING: -55

°C to +175°C.